[REL] Fm_NewInteriors v1.0... - Page 30

d85 · 03-20-10, 07:06 AM

Quote:

Originally Posted by Aces

@d85,

Hi,

As DD mentioned, there aren't any mods needed to run the interiors but be aware that in Thomsen's Sound Pack mod there are two files that will be overwritten when installing FM's Interiors mod the "command_en.cfg" and the "NSS_Uboat7_CR.dsd" files.

The commands.cfg file shouldn't be a problem but the "NSS_Uboat7_CR.dsd" file (as supplied with FM Interiors mod) will possibly stop Thomsen's mod from working as intended. I've had a look at "Thomsen's "NSS_Uboat7_CR.dsd" file and I think it would be okay to apply just this file after installing both mods as follows in JSGME:

Thompsen's Sound (minus NSS_Uboat7_CR.dsd)
FM's Interiors
the "NSS_Uboat7_CR.dsd" from Thomsen's Sound mod.

To accomplish this I'd make a new mod fix with the correct file structure containing only the "NSS_Uboat7_CR.dsd" from Thomsen's mod and call it something like FM-NI Fix for Thomsen's Sound Pack.

Then Dissable both FM interiors and Thompsen's mods in JSGME, rename the "NSS_Uboat7_CR.dsd" file inside the Tompsen's mod folder to "NSS_Uboat7_CR.dsd.bak" or suchlike as a backup. and then re-enable the mods in the above order.

The 3GB patch helped me even with 4GB RAM so well worth a try but the 3GB patch works when you have more than 3GB to enable the game's .exe to address more RAM.

Best Regards

Aces

Hi,

I tried different ways to make this misstake correct but it's all just the same it's not working what ever i've done just useless. I see for the first time the big mod like that.

Does anyone can tell me how to set the command room with hanging food with out other rooms?

Regards,

03-20-10, 01:35 PM

I just can not get this mod to load without a CTD when starting new career in 1941 in 1st Flot (to get VIIC)

System
Windows 7 64bit with 4GB RAM (brand new install), E6600 @ 2.4GHz, 2*BFG 650MB GTS8800 graphics cards in SLI mode.

Game
Sh3 patched to 1.4
GWX installed with ONLY the following mods:
GWX - 16km Atmosphere
GWX - Captain America's Officer Icons
GWX - Enhanced Damage Effects
GWX - No Medals on Crew
FM_NewInterior_V1.0

I have read that the 4MB patch is not required for Windows 7 64bit, however I have tried both with the patch and without but to no avail. I have also tried running it in Windows XP SP3 compatibility mode but no luck there either.

I have also tried running it with and without the hires fix but to no avail.

I can of course run the game using any other sub, i.e. I can start in Kiel in 1939 no problem.

At this point I am at a loss. Perhapps some kind gent/lady could advise ? Anvart, you know your stuff re Windows 7....what do you think ?

Or put another way...HELP ME PLEASE!!!!

UG

EDIT: Starforce removed and NO CD thingy also being used. BUT TO NO AVAIL!!!!
EDIT AGAIN: SH3 installed on E:\SH3....i.e. not the default. BUT TO NO AVAIL!!!!

Anvart · 03-20-10, 01:48 PM

Quote:

Originally Posted by Uber Gruber

...
Anvart, you know your stuff re Windows 7....what do you think ?
...
UG

EditBin and edited boot.ini have been tested by me on Win ХР SP2...SP3.
I do not have Win 7 OS.

Anvart · 03-20-10, 01:59 PM

Quote:

Originally Posted by DivingDuck

...
For some unknown reason I did not encounter any problem with any of my laptops. Even the older one is running the mod without problems. BUT, both laptops come at 4GB RAM.

Regards,
DD

Publish section [operating systems] from your boot.ini file...
or only keys...

03-20-10, 02:14 PM

Okay, so lets try a bit of Edward de Bono..

Has ANYONE managed to get this FM_NewInteriors_V1.0 to work on a Windows 7 64 bit system ?

Perhapps Stiebler, or JScones, could help as they have Win7 64bit...pretty please, cherry on top and all that...

asanovic7 · 03-21-10, 05:58 AM

after adding some ram and a new hd..
I succeeded in starting this mod only with stock sh3..
wow..
wow..
wow..
it looks..
wow..
wow..
wow..
wow..
things missing are the crew, torpedo room, but this is still..
wow..
wow..
wow..

d85 · 03-21-10, 06:30 AM

Quote:

Originally Posted by asanovic7

after adding some ram and a new hd..
I succeeded in starting this mod only with stock sh3..
wow..
wow..
wow..
it looks..
wow..
wow..
wow..
wow..
things missing are the crew, torpedo room, but this is still..
wow..
wow..
wow..

How much of RAM did you have?

asanovic7 · 03-21-10, 07:12 AM

2gb now.. added 500.. not much.. just to peak this mod.. I have to buy new bucket.. soon..

03-21-10, 04:25 PM

Okay, everything works well on Win 7 64bit but without the HiResFix.

So stuck in 1024 * 768 for now

Still, at least everything works and I can play Sh3 again...phew!

melnibonian · 03-22-10, 11:31 AM

Quote:

Originally Posted by Uber Gruber

Okay, everything works well on Win 7 64bit but without the HiResFix.

Is it because it doesn't work or you haven't used it yet?

Wolfehunter · 03-22-10, 02:02 PM

Quote:

Originally Posted by Uber Gruber

Okay, so lets try a bit of Edward de Bono..

Has ANYONE managed to get this FM_NewInteriors_V1.0 to work on a Windows 7 64 bit system ?

Perhapps Stiebler, or JScones, could help as they have Win7 64bit...pretty please, cherry on top and all that...

Same here It CTDs I don't know why?

melnibonian · 03-22-10, 02:16 PM

I am running it without any problems with Windows 7 (32bit)

tomfon · 03-22-10, 02:19 PM

I am running win7 x64 and the game runs fine with the mod enabled though i had the exe patched first. I did nothing else special.

03-22-10, 07:27 PM

Got it all working fine on win 7 64 bit with hi res up to 1600 * 1200

See: http://www.subsim.com/radioroom/show...99#post1325699

Posts 77 and 80. Any questions then please post there.

Cheers,

UG

d85 · 03-23-10, 12:29 AM

Quote:

Originally Posted by asanovic7

2gb now.. added 500.. not much.. just to peak this mod.. I have to buy new bucket.. soon..

Hi guys,

I read in this topic that many of users play this mod with out any problems with 2 gb of RAM and i would like to khown what did they do to run it well?

03-20-10, 01:35 PM	#437
Uber Gruber Stowaway Posts: n/a Downloads: Uploads:	I just can not get this mod to load without a CTD when starting new career in 1941 in 1st Flot (to get VIIC) System Windows 7 64bit with 4GB RAM (brand new install), E6600 @ 2.4GHz, 2BFG 650MB GTS8800 graphics cards in SLI mode. Game Sh3 patched to 1.4 GWX installed with ONLY the following mods: GWX - 16km Atmosphere GWX - Captain America's Officer Icons GWX - Enhanced Damage Effects GWX - No Medals on Crew FM_NewInterior_V1.0 I have read that the 4MB patch is not required for Windows 7 64bit, however I have tried both with the patch and without but to no avail. I have also tried running it in Windows XP SP3 compatibility mode but no luck there either. I have also tried running it with and without the hires fix but to no avail. I can of course run the game using any other sub, i.e. I can start in Kiel in 1939 no problem. At this point I am at a loss. Perhapps some kind gent/lady could advise ? Anvart, you know your stuff re Windows 7....what do you think ? Or put another way...HELP ME PLEASE!!!! UG EDIT: Starforce removed and NO CD thingy also being used. BUT TO NO AVAIL!!!! EDIT AGAIN: SH3 installed on E:\SH3....i.e. not the default. BUT TO NO AVAIL!!!! Last edited by Uber Gruber; 03-20-10 at 02:19 PM.*

03-22-10, 02:16 PM	#447
melnibonian Ocean Warrior Join Date: Jul 2006 Location: Reading UK Posts: 3,473 Downloads: 90 Uploads: 0	I am running it without any problems with Windows 7 (32bit) __________________ http://www.thegreywolves.com/ http://wolvesatwar.com/ Download GWX and other goodies: http://hosted.filefront.com/melnibonian

03-22-10, 02:19 PM	#448
tomfon Grey Wolf Join Date: Jan 2008 Location: CK7662 Posts: 918 Downloads: 178 Uploads: 4	I am running win7 x64 and the game runs fine with the mod enabled though i had the exe patched first. I did nothing else special. __________________ "I would rather have questions that can't be answered than answers which can't be questioned." - Richard P. Feynman [1918/1988] "I've missed more than 9000 shots in my career. I've lost almost 300 games. 26 times, I've been trusted to take the game winning shot and missed. I've failed over and over and over again in my life. And that is why I succeed." - Michael Jordan "You don't even care. That's how much an impact the three-point shot has and it's evidenced by how everybody plays... There's no basketball anymore, there's no beauty in it. It's pretty boring. But it is what it is and you need to work with it." - Greg Popovich Mods for SH3

03-20-10, 02:14 PM	#440
Uber Gruber Stowaway Posts: n/a Downloads: Uploads:	Okay, so lets try a bit of Edward de Bono.. Has ANYONE managed to get this FM_NewInteriors_V1.0 to work on a Windows 7 64 bit system ? Perhapps Stiebler, or JScones, could help as they have Win7 64bit...pretty please, cherry on top and all that...

03-21-10, 05:58 AM	#441
asanovic7 Captain Join Date: Mar 2008 Posts: 516 Downloads: 70 Uploads: 0	after adding some ram and a new hd.. I succeeded in starting this mod only with stock sh3.. wow.. wow.. wow.. it looks.. wow.. wow.. wow.. wow.. things missing are the crew, torpedo room, but this is still.. wow.. wow.. wow..

03-21-10, 07:12 AM	#443
asanovic7 Captain Join Date: Mar 2008 Posts: 516 Downloads: 70 Uploads: 0	2gb now.. added 500.. not much.. just to peak this mod.. I have to buy new bucket.. soon..

03-21-10, 04:25 PM	#444
Uber Gruber Stowaway Posts: n/a Downloads: Uploads:	Okay, everything works well on Win 7 64bit but without the HiResFix. So stuck in 1024 * 768 for now Still, at least everything works and I can play Sh3 again...phew!

03-22-10, 07:27 PM	#449
Uber Gruber Stowaway Posts: n/a Downloads: Uploads:	Got it all working fine on win 7 64 bit with hi res up to 1600 * 1200 See: http://www.subsim.com/radioroom/show...99#post1325699 Posts 77 and 80. Any questions then please post there. Cheers, UG