SUBSIM Radio Room Forums



SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997

Go Back   SUBSIM Radio Room Forums > Silent Hunter 3 - 4 - 5 > Silent Hunter 4: Wolves of the Pacific
Forget password? Reset here

Reply
 
Thread Tools Display Modes
Old 05-09-09, 03:03 PM   #1
Groove74
Watch
 
Join Date: May 2009
Location: Oklahoma City
Posts: 23
Downloads: 32
Uploads: 0
Is this Normal or What?

Well after looking at many Tutorials and many nights of Trial and Error. I have run into something else I need some advice on. Ok so I head out on Patrol and I get to Patrol zone. I set my Sub "USS-Voyager-0074" to Patrol Pattern near the mission marker slowly working my way around the zone. I getting contact reports for ship that are way outta range or at long range. How can I get just reports for ships in my Patrol zone? So far I have seen very little combat and the war is passing me by! Doing 1941 mission?
__________________
Monitor 23 in Widescreen HD Gateway 1680X1050
OS Windows Vista 32 Bit..
CPU AMD Phenom quad core 920 2.8 Ghz
Graphics Radeon HD 4870 HD 1Gig..Ram HD
Ram 4gig DDR2 1066 OCZ Fatality
HDD 500Gig WD 7200RPM
Mainboard Asus M3N78-VM
Groove74 is offline   Reply With Quote
Old 05-09-09, 03:08 PM   #2
Torplexed
Let's Sink Sumptin' !
 
Torplexed's Avatar
 
Join Date: Dec 2001
Location: Seattle, WA
Posts: 5,823
Downloads: 43
Uploads: 0


Default

I think some of the mods addressed this problem, but yeah in the stock version of the game it was normal to get useless contact reports about convoys and task forces thousands of miles away.
__________________

--Mobilis in Mobili--
Torplexed is offline   Reply With Quote
Old 05-09-09, 03:11 PM   #3
Groove74
Watch
 
Join Date: May 2009
Location: Oklahoma City
Posts: 23
Downloads: 32
Uploads: 0
Default

I see. Well that only make learning the game a bit more diffacult. As I am not ready to start modding yet. Do you Know how I can get just reports for ships inside my patrol Zone
__________________
Monitor 23 in Widescreen HD Gateway 1680X1050
OS Windows Vista 32 Bit..
CPU AMD Phenom quad core 920 2.8 Ghz
Graphics Radeon HD 4870 HD 1Gig..Ram HD
Ram 4gig DDR2 1066 OCZ Fatality
HDD 500Gig WD 7200RPM
Mainboard Asus M3N78-VM
Groove74 is offline   Reply With Quote
Old 05-09-09, 03:16 PM   #4
peabody
Admiral
 
Join Date: Jan 2008
Location: New York State, USA
Posts: 2,390
Downloads: 126
Uploads: 7
Default

Quote:
Originally Posted by Groove74 View Post
Well after looking at many Tutorials and many nights of Trial and Error. I have run into something else I need some advice on. Ok so I head out on Patrol and I get to Patrol zone. I set my Sub "USS-Voyager-0074" to Patrol Pattern near the mission marker slowly working my way around the zone. I getting contact reports for ship that are way outta range or at long range. How can I get just reports for ships in my Patrol zone? So far I have seen very little combat and the war is passing me by! Doing 1941 mission?
EDIT: Incorrect information. The mission editor uses KM not miles for the radius of the Patrol zone. So while most of the zones ARE 100 it is KM not miles as I stated.

The Patrol zone (Star with binoculars on it) is usually a 100 mile radius from the Star. Use the compass and draw a circle slightly smaller than 100 miles, just so you don't accidently leave the zone. If you leave the zone the time starts over. You usually have to spend 48 hours in that 100 mile radius. If ships enter that area, attack. IF not just use time compression and go 48 hours until the star turns grey, your patrol will be a success and then sink ships anywhere you want. If you want to play 'realistic' you can stay in that area, but you won't be limited by the 100 miles once the star is grey. (mission complete)

Edit: I see you got a couple answers before I finished typing. One point, not all ships show a red box, so there may be ships close by that you won't find unless you patrol. Not all ship, convoys and task forces are shown on the map with red squares. So basically just ignore the "contacts" that are too far away, if you chase them, they will be gone by the time you get there anyway.
Peabody
__________________

System Spec: Gigabyte GA-965P-DS3, PentiumD Dual Core Presler 945 3.4Ghz, Gigabyte Geforce 7600GS, 2-1GB Corsair XMS2 800Mhz in Dual Channel, 2-WD 250 SATA 3Gb/s, Onboard Realtek HD 7.1 Audio, DVD ROM, DVD burner, Hiper 580 Watt Power supply, WinXP SP2.


Last edited by peabody; 05-10-09 at 02:54 PM.
peabody is offline   Reply With Quote
Old 05-10-09, 09:25 AM   #5
Tony845
Seaman
 
Join Date: Mar 2009
Location: A little ways off your port bow.
Posts: 34
Downloads: 2
Uploads: 0
Default

I thought the Patrol Radius was 50 miles ??
Tony845 is offline   Reply With Quote
Old 05-10-09, 09:49 AM   #6
Armistead
Rear Admiral
 
Join Date: Dec 2008
Location: on the Dan
Posts: 10,880
Downloads: 364
Uploads: 0


Default

Most areas and stock is usually is 50 miles, but many mods change that. If you have RSRD the messages will tell you what limits to stay in and for how long, some one day, some three. I just get in the zone and TC until time is up.

Are you using any mods.
Armistead is offline   Reply With Quote
Old 05-10-09, 02:10 PM   #7
peabody
Admiral
 
Join Date: Jan 2008
Location: New York State, USA
Posts: 2,390
Downloads: 126
Uploads: 7
Default

Quote:
Originally Posted by Armistead View Post
Most areas and stock is usually is 50 miles, but many mods change that. If you have RSRD the messages will tell you what limits to stay in and for how long, some one day, some three. I just get in the zone and TC until time is up.

Are you using any mods.
EDIT: The patrol zones in the Mission Editor are given in KM not miles, my mistake, corrections made to the following info.


Below is a map of Patrol Zones, this is ONLY Patrol zones where you must stay within a limited area for a certain amount of time. I didn't think while I was doing the map, I should have put in the time too. But just stay inside the Patrol area until the star turns grey. I did not include any other missions, such as sink, photo, supply drop...etc, since none of them require you to stay in a certain radius for a length of time.

There are two 75 KM zones in the Sulu Sea, all the rest are 100 KM or more.



I have uploaded this to the download section under "Missions and Maps" in case the image from Imageshack gets deleted.

http://www.subsim.com/radioroom/down...o=file&id=1109

Peabody
__________________

System Spec: Gigabyte GA-965P-DS3, PentiumD Dual Core Presler 945 3.4Ghz, Gigabyte Geforce 7600GS, 2-1GB Corsair XMS2 800Mhz in Dual Channel, 2-WD 250 SATA 3Gb/s, Onboard Realtek HD 7.1 Audio, DVD ROM, DVD burner, Hiper 580 Watt Power supply, WinXP SP2.


Last edited by peabody; 05-10-09 at 03:12 PM.
peabody is offline   Reply With Quote
Old 05-10-09, 11:39 PM   #8
Tony845
Seaman
 
Join Date: Mar 2009
Location: A little ways off your port bow.
Posts: 34
Downloads: 2
Uploads: 0
Default

I play the game unmodded but I have to say I am impressed with the work done by all the people who produce the mods for Silent Hunter. There are so many variants that can be applied to the game that it seems the one basic game can be changed to suit any players tastes. A range of difficulty from simple fun to blindingly hard.
Good work.

Tony
Tony845 is offline   Reply With Quote
Old 05-11-09, 11:18 AM   #9
Akula4745
Convicted Ship Killer
 
Join Date: Mar 2009
Location: Just out of sight... plotting your course and speed
Posts: 846
Downloads: 371
Uploads: 1
Default

Hey Groove,
Don't be afraid of single function mods like the reduced radio traffic... they will not mess you up. Just install JGSME and add the mod... if it displeases you then you can simply open JGSME and remove it... no fuss, no muss. Check it out!

Here is a link to Webster's fine mod for exactly what you mentioned: the radio traffic -- Webster's Reduced Radio Traffic for v1.4 & v1.5 (6.3 KB)
http://www.subsim.com/radioroom/down...o=file&id=1033


Quote:
Originally Posted by peabody View Post
Sweet map, peabody! Many thanks!

Akula4745
__________________
Akula4745



"If you sit by the river long enough... the body of your enemy will float by -- SunTzu"
Akula4745 is offline   Reply With Quote
Old 05-11-09, 11:22 AM   #10
Groove74
Watch
 
Join Date: May 2009
Location: Oklahoma City
Posts: 23
Downloads: 32
Uploads: 0
Default

Sweet thanks I added the mod and bow I am having alot more fun I am now finding ships and now running all over the place
__________________
Monitor 23 in Widescreen HD Gateway 1680X1050
OS Windows Vista 32 Bit..
CPU AMD Phenom quad core 920 2.8 Ghz
Graphics Radeon HD 4870 HD 1Gig..Ram HD
Ram 4gig DDR2 1066 OCZ Fatality
HDD 500Gig WD 7200RPM
Mainboard Asus M3N78-VM
Groove74 is offline   Reply With Quote
Old 05-11-09, 05:23 PM   #11
Akula4745
Convicted Ship Killer
 
Join Date: Mar 2009
Location: Just out of sight... plotting your course and speed
Posts: 846
Downloads: 371
Uploads: 1
Default

Excellent, sir... I knew you'd get the hang of it. Hell, if I can... anybody can!

Akula4745
__________________
Akula4745



"If you sit by the river long enough... the body of your enemy will float by -- SunTzu"
Akula4745 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:36 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1995- 2025 Subsim®
"Subsim" is a registered trademark, all rights reserved.