[WIP] Cold War Mod - Page 40

gimpy117 · 03-19-09, 10:14 AM

Quote:

Originally Posted by keltos01

you mean more surface vessels, right ? We'll need the whole northern fleet modded !

keltos

true....we could use some hold-over ships

merchants too...a few could pass for 1960's era stuff...granted that the "modern" merchants would become "old" merchants...

Werewolf · 03-20-09, 04:12 AM

Verdamt!

Some times this game is really spastic! Now I have a problem with the depth keeping! Every time I get below 200 meters the boat won't stop, it just continues downwards until it's crushed....and my test depth is >300 m!. Has anyone experienced this before?

thyro · 03-23-09, 02:40 AM

This enhanced Typhoon surface near my fishing boat

WIP

tomagabriel · 03-23-09, 11:33 AM

Nice shots!

Franklin Van Valkenburg · 03-24-09, 04:00 PM

Ok mates, the's pretty much finished at this point. Is there anyone that can take the 3DS Max model I've made and get it in-game?

To-Do List:
Pull the bow up a little to give the forward deck an upward slope.
Round off the top of the con tower's tail-end. Too much of a sharp angle. (Done)
Give the forward end of the con tower more of a bulbus shape. (Done)
Add the rail around the base of the con tower. [This one is proving a bit hard. I'll see what I can do.]
Pull the stern in a little. The hull looks too long. (Done)
Increase the beam further aft. It looks too tapered. (Done)
Pull in the bottom corner of the stern to let the rudder stick out just a little bit. (Done)
Edit the hull's tumblehome. The ballast tanks didn't quite hang on either side like saddlebags... give the hull a smoother appearance up top and round it off more at the keel. (Done)
Cut out the respective areas in the con for the crew, hatch, periscopes, radio antennas, and snorkel. (And the little windows in the front) (Done)
Add the tie-offs along the deck. [I looked at those pictures and realized that there wern't any.]
Actually cut out the missile silo hatches and create the missile silos in the con tower. (Done)
Cut out and model the torpedo tubes. (Done)

Any comments? I'm sure there are people out there that'll pick up on a detail that I need to add/fix.

thyro · 03-24-09, 05:23 PM

Great work Franklin

Franklin Van Valkenburg · 03-24-09, 05:53 PM

Thanks for posting that photo! (I see the fittings along the deck! And a detail on the con that I've missed thus far!)

As to the K-19's number... what is it? I've seen 294 and 271. I know the number I've put on the con is completely wrong... its just for looks at the moment.

How detailed do you guys want this? I've seen the hatches in the side of the con, but I don't know if they are truly needed.

Sledgehammer427 · 03-28-09, 04:31 PM

Franklin, Looking at your 3d model, you are doing good, I should suggest, however, that you make the prop nacelles a little smaller, they are looking kinda wingish.
heres a picture of a K-19 model I built still on the sprue, note the size of the nacelles, left, about the middle under the deck peice (the oval-looking peice)

another pic, look at the bottom, theres a size refrence

thyro · 03-28-09, 08:37 PM

Enhancements in progress for ...

thyro · 03-30-09, 09:13 AM

Typhoon update on this LINK ... enjoy...

Note: you will need XPETIT typhoon mod 1st

Roger_Becker · 04-04-09, 10:55 PM

Here is the first video of the USS Skipjack Class

Thanks to the Constructor Tomagabiel

Video Link

Gruß Roger Becker (Ryan)

keltos01 · 04-05-09, 07:56 AM

nice !

keltos

Bartolomeus · 04-05-09, 02:56 PM

Great video! Amazing work on the Skipjack!

Marko

TitaniumRR · 04-05-09, 06:35 PM

Thyro!

Looks amazing and stupendous!
Congrats!

Where can XPETIT typhoon mod be downloaded?

Is there anything special about installing this mod?

Is it adequate to have SH4 1.4 or you need the 1.5 U-boat missions add-on to activate the Typhoon in gameplay?

Roger_Becker!

The waves and splashes on the video around the USS Skipjack are quite authentic.
Great job!

thyro · 04-06-09, 08:03 AM

Quote:

Originally Posted by TitaniumRR

Thyro!

Looks amazing and stupendous!
Congrats!

Where can XPETIT typhoon mod be downloaded?

Is there anything special about installing this mod?

Is it adequate to have SH4 1.4 or you need the 1.5 U-boat missions add-on to activate the Typhoon in gameplay?

Roger_Becker!

The waves and splashes on the video around the USS Skipjack are quite authentic.
Great job!

XPETIT mods are in here mate http://hosted.filefront.com/XPETIT/

I can't confirm (coz I use 1.5) but I don't remember to have seen references to 1.5 stuff, so think all of them would work on 1.4.

install XPETIT's typhoon mod then install the Typhoon FX files.

The FX for Typhoon+LeTerrible is initial work so prety much work in progress... Ohio is taking most of the time atm.

Regarding the USS Skipjack - TomaGabriel deserves all the credits, not me!

Cheers

View Poll Results: What time period would you like the Cold War Mod to encompass?
Early Cold War: 1947 to the early 1960s	148	14.18%
Mid Cold War: 1960s to 1980s	195	18.68%
Late Cold War: 1980's to 1991	147	14.08%
I want the whole thing! 1947 to 1991	554	53.07%
Voters: 1044. You may not vote on this poll

03-23-09, 02:40 AM	#588
thyro Commander Join Date: Mar 2006 Location: on a rock surrounded by water, that people call it UK Posts: 473 Downloads: 31 Uploads: 0	This enhanced Typhoon surface near my fishing boat WIP __________________ "The good news is that you’re never, ever more than 6 miles from land. The bad news is, the land is straight down!"

03-24-09, 05:23 PM	#591
thyro Commander Join Date: Mar 2006 Location: on a rock surrounded by water, that people call it UK Posts: 473 Downloads: 31 Uploads: 0	Great work Franklin __________________ "The good news is that you’re never, ever more than 6 miles from land. The bad news is, the land is straight down!"

03-28-09, 04:31 PM	#593
Sledgehammer427 PacWagon Join Date: Jun 2007 Location: Drinking coffee and staring at trees in Massachusetts Posts: 2,908 Downloads: 287 Uploads: 0	Franklin, Looking at your 3d model, you are doing good, I should suggest, however, that you make the prop nacelles a little smaller, they are looking kinda wingish. heres a picture of a K-19 model I built still on the sprue, note the size of the nacelles, left, about the middle under the deck peice (the oval-looking peice) another pic, look at the bottom, theres a size refrence __________________ Cold Waters Voice Crew - Fire Control Officer Cmdr O. Myers - C/O USS Nautilus (SS-168) 114,000 tons sunk - 4 Spec Ops completed V-boat Nutcase - Need supplies? Japanese garrison on a small island in the way? Just give us a call! D4C!

03-28-09, 08:37 PM	#594
thyro Commander Join Date: Mar 2006 Location: on a rock surrounded by water, that people call it UK Posts: 473 Downloads: 31 Uploads: 0	Enhancements in progress for ... __________________ "The good news is that you’re never, ever more than 6 miles from land. The bad news is, the land is straight down!"

03-20-09, 04:12 AM	#587
Werewolf Sonar Guy Join Date: Jul 2003 Location: Europe Posts: 394 Downloads: 69 Uploads: 0	Verdamt! Some times this game is really spastic! Now I have a problem with the depth keeping! Every time I get below 200 meters the boat won't stop, it just continues downwards until it's crushed....and my test depth is >300 m!. Has anyone experienced this before?

03-23-09, 11:33 AM	#589
tomagabriel Machinist's Mate Join Date: Nov 2006 Posts: 122 Downloads: 110 Uploads: 3	Nice shots!

03-24-09, 04:00 PM	#590
Franklin Van Valkenburg Sailor man Join Date: Feb 2009 Location: The Virginia Military Institute Posts: 47 Downloads: 14 Uploads: 0	Ok mates, the's pretty much finished at this point. Is there anyone that can take the 3DS Max model I've made and get it in-game? To-Do List: Pull the bow up a little to give the forward deck an upward slope. Round off the top of the con tower's tail-end. Too much of a sharp angle. (Done) Give the forward end of the con tower more of a bulbus shape. (Done) Add the rail around the base of the con tower. [This one is proving a bit hard. I'll see what I can do.] Pull the stern in a little. The hull looks too long. (Done) Increase the beam further aft. It looks too tapered. (Done) Pull in the bottom corner of the stern to let the rudder stick out just a little bit. (Done) Edit the hull's tumblehome. The ballast tanks didn't quite hang on either side like saddlebags... give the hull a smoother appearance up top and round it off more at the keel. (Done) Cut out the respective areas in the con for the crew, hatch, periscopes, radio antennas, and snorkel. (And the little windows in the front) (Done) Add the tie-offs along the deck. [I looked at those pictures and realized that there wern't any.] Actually cut out the missile silo hatches and create the missile silos in the con tower. (Done) Cut out and model the torpedo tubes. (Done) Any comments? I'm sure there are people out there that'll pick up on a detail that I need to add/fix.

03-24-09, 05:53 PM	#592
Franklin Van Valkenburg Sailor man Join Date: Feb 2009 Location: The Virginia Military Institute Posts: 47 Downloads: 14 Uploads: 0	Thanks for posting that photo! (I see the fittings along the deck! And a detail on the con that I've missed thus far!) As to the K-19's number... what is it? I've seen 294 and 271. I know the number I've put on the con is completely wrong... its just for looks at the moment. How detailed do you guys want this? I've seen the hatches in the side of the con, but I don't know if they are truly needed.

03-30-09, 09:13 AM	#595
thyro Commander Join Date: Mar 2006 Location: on a rock surrounded by water, that people call it UK Posts: 473 Downloads: 31 Uploads: 0	Typhoon update on this LINK ... enjoy... Note: you will need XPETIT typhoon mod 1st __________________ "The good news is that you’re never, ever more than 6 miles from land. The bad news is, the land is straight down!" Last edited by thyro; 03-30-09 at 09:30 AM.

04-04-09, 10:55 PM	#596
Roger_Becker Watch Join Date: Aug 2007 Posts: 18 Downloads: 89 Uploads: 0	Silent Hunter 4 USS Skipjack SSN 585 Here is the first video of the USS Skipjack Class Thanks to the Constructor Tomagabiel Video Link Gruß Roger Becker (Ryan)

04-05-09, 07:56 AM	#597
keltos01 Silent Hunter Join Date: Feb 2008 Location: Milan Italy Posts: 4,999 Downloads: 114 Uploads: 18	nice ! keltos __________________ "Honorable Builder of Sinking Ships"

04-05-09, 02:56 PM	#598
Bartolomeus Planesman Join Date: May 2005 Location: Germany Posts: 190 Downloads: 33 Uploads: 0	Great video! Amazing work on the Skipjack! Marko __________________

04-05-09, 06:35 PM	#599
TitaniumRR Mate Join Date: Jul 2008 Location: Atlantic Ocean Posts: 60 Downloads: 17 Uploads: 0	Thyro! Looks amazing and stupendous! Congrats! Where can XPETIT typhoon mod be downloaded? Is there anything special about installing this mod? Is it adequate to have SH4 1.4 or you need the 1.5 U-boat missions add-on to activate the Typhoon in gameplay? Roger_Becker! The waves and splashes on the video around the USS Skipjack are quite authentic. Great job! __________________