Rfb - Stop Watch And Tool Set For The Blind!

[I'm goin' down]

I appreciate everything you said. I used to tune up my car. But I stopped there and did not want to learn how to change valves, fix the transmission, clutch, etc. I am not interested enough to spend the hours/days it will take to get the stop watch, etc. the way I would prefer. I would just as soon play without my glasses on. I will leave it to those with more interest. But I started this thread because what is on my screen sucks, and I wanted to call my opinion to the SH4 modders. My screen by the way is 13 or 14 inches wide and 10.5 inches high.

[I'm goin' down]

I have modified my post in some material respects.

Well, I solved my problem for now.

I looked up a post from Jamminadrid in one of my very early threads. He provides a link to FileFront (FileFont??) where you can download a "Mini_ChronoTools.ini" file, insert it into the .ini folder in SH4 v.1.5, and you will end up with a mini chrono and mini tools. You activate it using JTex.

To those critical of my initial post, try jamminadrid's mod and you might agree that the mini tools and chrono are not reduced in size to the point where they become useless. The dimensions of my compurter screen are 13" - 14" x 10.5".

Here is what I did. I downloaded jamminadrid's file from FileFront to my my Mods folder. The file is called "Mini_ChronoTools.ini." I transferred it to the .ini folder in the main SH4 file and activated it via JTEX.

Here is what you can do. I have two option you can choose from. Personally, I would follow option no. 2, as I am not a pro, but jamminadrid is.

(1) Paste the data below to Notepad. Save it to the mods folder. Label the saved Nofepad file "Mini_ChronTool.ini" which is the name jamminadrid gives it. Copy or move this file to your .ini folder in the main SH4. Activate via JTex. Jamminadrid's instructions say his mod works with with version 1.5. It is also working with my RFB/RSRDC mods, which I just updated this week.

Note, I am NOT a modder, so I guarantee nothing....NADA.

(2) Alternatively, if you prefer, you can look up my thread and find jamminadrid's post, follow his link to FileFront and download the file. Here is the link: mini chronometer problem/general question ( 1 2) posted by I'm goin' down. The link sends you to the last post in the thread which was on 11-24-2008 01:21 AM by jimimadrid 24669SH4 Fleet Boat Mods Workshop. He posted a couple of messages in the thread, so scroll up until you find the one that discusses his mod.


Below is the information I copied from the "Mini_ChronoTools.ini." that I downloaded and copied for you to see. It was derived (i.e. copied and pasted) from jamminadrid's post containing his link to FileFront.

As ancient46 pointed out, to modify the chrono and navagiation tools is not a simple job. I looks like it is a major undertaking.

Targetfile=Data\Menu\menu_1024_768.ini
[G29 I2]
Pos=412,0,312,300
[G29 I3]
Zone= 566 596 3 3 0 1 0x2902000C 0.5 -0.5 0x29020006 -0.5 0.5 0 0
[G29 I4]
Zone= 562 686 9 138 0 1 0x2902000C 0.5 -0.5 0x2902000E -0.5 0.5 0 0
[G29 I5]
Zone= 564 674 6 39 0 1 0x2902000C 0.5 -0.09 0x2902000F -0.5 0 0 0
[G29 I6]
Zone= 562 686 9 138 0 1 0x2902000C 0.5 -0.5 0x29020010 -0.5 0.5 0 0
[G29 I7]
Zone= 557 681 16.5 130.5 0 1 0x2902000C 0.5 -0.5 0x29020008 -0.5 0.5 0 0
[G29 I8]
Zone= 560 692 12 147 0 1 0x2902000C 0.5 -0.5 0x29020009 -0.5 0.5 0 0
[G29 I9]
Zone= 563 567 6 45 0 1 0x2902000C 0.5 -1 0x29020011 -0.5 1 -1 11
[G29 I10]
Zone= 564 567 7.5 46.5 0 1 0x29020007 0.5 -0.5 0x29020002 -0.5 0.5 0 -7
[G29 I11]
Zone= 565 583 6 60 0 1 0x29020007 0.5 -0.5 0x29020003 -0.5 0.5 0 0
[G29 I12]
Zone= 564 573 7.5 45 0 1 0x29020007 0.5 -0.5 0x29020004 -0.5 0.5 0 0
[G29 I13]
Zone= 564 674 6 39 0 1 0x2902000F 0.5 -0.5 0x29020005 -0.5 0.5 0 0
[G29 I14]
Zone= 529 583 60 60 0 1 0x2902000C 0.5 -0.965 0x29020007 -0.5 1 1 0
[G29 I15]
Zone= 558 720 15 14 0 1 0x29020000 0.5 -0.16 0x2902000D -0.5 0 0 0
[G29 I16]
Zone= 470 692 147 147 0 1 0x29020001 0.5 -0.505 0x2902000C -0.5 0.5 0 0
[G29 I17]
Zone= 450 702 177 176 0 1 0x29020001 0.5 -1 0x2902000B -0.5 1 0 0
[G29 I18]
Zone= 450 722 177 191 0 1 0x29020000 0.5 -1 0x29020001 -0.5 1 0 0
[G29 I19]
Zone= 544 758 36 27 0 1 0x29020001 0.5 0 0x2902000A -0.5 1 0 0
[G31 I47]
Name=Tool Helper
Zone= 20 506 112 56 0 1 0x31010001 0.1 -0.1 0x3101000A 0.5 1 0 0
Display=2;Linear
Crop 0=0.673828,0.859375,0.15625,0.078125
Crop 1=0.673828,0.774414,0.15625,0.078125
Crop 2=0.673828,0.859375,0.15625,0.078125
Crop 3=0.673828,0.774414,0.15625,0.078125
Crop 4=0.835938,0.859375,0.15625,0.078125
Crop 5=0.835938,0.774414,0.15625,0.078125
Crop 6=0.673828,0.859375,0.15625,0.078125
Crop 7=0.673828,0.774414,0.15625,0.078125
[G31 I49]
Name=Pen-Marker
Pos=140,-84,110,240
Zone= 140 236 77 168 0 1 0x31010000 0.3 -0.8 0x31010005 -0.6 0.9 6 0
Display=2;Linear
Crop 0=0.820313,0,0.107421875,0.234375
Crop 1=0.820313,0,0.107421875,0.234375
Crop 2=0.820313,0.432617,0.107421875,0.234375
Crop 3=0.820313,0,0.107421875,0.234375
[G31 I50]
Name=Compass
Zone= 110 230 45 105 0 1 0x31010000 0.3 -0.7 0x31010004 -1 1 0 0
Display=2;Linear
Crop 0=0.726563,0,0.087890625,0.205078125
Crop 1=0.726563,0,0.087890625,0.205078125
Crop 2=0.726563,0.432617,0.087890625,0.205078125
Crop 3=0.726563,0,0.087890625,0.205078125
[G31 I51]
Name=Zoom
Zone= -27 273 117 115 0 1 0x31010000 0.2 -0.8 0x31010003 -1 1.1 20 0
Display=2;Linear
Crop 0=0.475586,0,0.228515625,0.224609375
Crop 1=0.475586,0,0.228515625,0.224609375
Crop 2=0.475586,0.432617,0.228515625,0.224609375
Crop 3=0.475586,0,0.228515625,0.224609375
[G31 I52]
Name=Eraser
Zone= 8 340 28 50 0 1 0x31010000 0.08 -0.4 0x31010006 0.07 1.7 0 0
Display=2;Linear
Crop 0=0.9375,0,0.0546875,0.09765625
Crop 1=0.9375,0,0.0546875,0.09765625
Crop 2=0.9375,0.432617,0.0546875,0.09765625
Crop 3=0.9375,0,0.0546875,0.09765625
[G31 I53]
Name=Protractor
Zone= -88 218 132 132 0 1 0x31010000 0.3 -1 0x31010002 -0.4 0.9 0 0
Display=2;Linear
Crop 0=0.238281,0.0449219,0.21484375,0.21484375
Crop 1=0.238281,0.0449219,0.21484375,0.21484375
Crop 2=0.238281,0.477539,0.21484375,0.21484375
Crop 3=0.238281,0.0449219,0.21484375,0.21484375
[G31 I54]
Name=Ruler
Zone= -60 426 140 284.2 0 1 0x31010000 0 -1 0x31010001 -0.3 1 0 0
Display=2;Linear
Crop 0=0,0,0.1953125,0.396484375
Crop 1=0,0,0.1953125,0.396484375
Crop 2=0,0.432617,0.1953125,0.396484375
Crop 3=0,0,0.1953125,0.396484375