SUBSIM Radio Room Forums



SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997

Go Back   SUBSIM Radio Room Forums > Silent Hunter 3 - 4 - 5 > SH4 Mods Workshop
Forget password? Reset here

Reply
 
Thread Tools Display Modes
Old 02-15-09, 02:52 PM   #1
lurker_hlb3
Admiral
 
Join Date: Apr 2005
Location: San Diego Calif
Posts: 2,290
Downloads: 187
Uploads: 12
Default

Quote:
Originally Posted by Scharnhorst1943
Quote:
Originally Posted by lurker_hlb3
Quote:
Originally Posted by Scharnhorst1943
OK, I have downloaded RSRDC for 1.5 stock. No other mods installed except for the menu background and music from FOTRS.

After installing RSRDC for 1.5 stock, when I launch a mission My deck gun is messed up. The gun is stuck, so that when I man it the gun will not rotate. Also, the gun will not elevate. On top of this it makes an eyesore in that the gun is pointed down at the deck and is not level.

I have tested this on stock 1.5 with no other mods. Anyone know a fix or is it a bug that is going to require an update to RSRDC?
When reporting problems please provide the following info or I will not be able to help you:

1. Assigned Task Group / Force
2. Type of Sub
3. Date
4. Location
5. All modes in install order
1. All and every assigned task Group Forces to start a campaign
2. All and every single type of sub
3. Any and every starting date
4. any and all locations
5. Just stock vanilla v1.5 and RSRDC for 1.5. ( I have tried with the patch and without the patch and no go, does not make a difference to the deck gun problem)
Which "version number" of RSRDC for 1.5 ?

Please note that with the current version of stock RSRDC ( v400 ) I'm unable to recreate your problem. Also if this was a problem with the mod I think that one of 500 people who have download the mod would have said something by now. I would recommend you check your install and conduct the same test with a "pure" stock SH4.v15. Last but not least, RSRDC does not make "any" changes to the main gun within SH4.

Last edited by lurker_hlb3; 02-15-09 at 04:03 PM.
lurker_hlb3 is offline   Reply With Quote
Old 02-16-09, 07:17 PM   #2
Scharnhorst1943
Seaman
 
Join Date: Aug 2007
Posts: 40
Downloads: 114
Uploads: 0
Default

Quote:
Originally Posted by lurker_hlb3
Which "version number" of RSRDC for 1.5 ?

Please note that with the current version of stock RSRDC ( v400 ) I'm unable to recreate your problem. Also if this was a problem with the mod I think that one of 500 people who have download the mod would have said something by now. I would recommend you check your install and conduct the same test with a "pure" stock SH4.v15. Last but not least, RSRDC does not make "any" changes to the main gun within SH4.
The version is v400 for stock 1.5. It is the very top download link in the first post. I really am not trying to be a pain in the arse, but I am not making this up either. I have reinstalled twice now, with the same effect. However, there are two things I might could do different, so for the sake of being thourough, I am doing a 3rd reinstall tonight. We will see how it goes. If not, i just don't know. All I have is stock 1.5 and RSRDC_SH15_v400. I don't know what else to tell you.

Let me try my reinstall and we'll see. I can take pictures and post what mods I have and the problem with the guns ... ??? This is the ONLY mod I have installed ... I am not kidding.
Scharnhorst1943 is offline   Reply With Quote
Old 02-16-09, 07:28 PM   #3
tater
Navy Seal
 
Join Date: Mar 2007
Location: New Mexico, USA
Posts: 9,023
Downloads: 8
Uploads: 2
Default

Stock SH4 had a bug where one of the deck guns was pointed down as I recall. Anyone else remember this? Was a long time ago.
tater is offline   Reply With Quote
Old 02-16-09, 07:52 PM   #4
lurker_hlb3
Admiral
 
Join Date: Apr 2005
Location: San Diego Calif
Posts: 2,290
Downloads: 187
Uploads: 12
Default

Quote:
Originally Posted by Scharnhorst1943
Quote:
Originally Posted by lurker_hlb3
Which "version number" of RSRDC for 1.5 ?

Please note that with the current version of stock RSRDC ( v400 ) I'm unable to recreate your problem. Also if this was a problem with the mod I think that one of 500 people who have download the mod would have said something by now. I would recommend you check your install and conduct the same test with a "pure" stock SH4.v15. Last but not least, RSRDC does not make "any" changes to the main gun within SH4.
The version is v400 for stock 1.5. It is the very top download link in the first post. I really am not trying to be a pain in the arse, but I am not making this up either. I have reinstalled twice now, with the same effect. However, there are two things I might could do different, so for the sake of being thourough, I am doing a 3rd reinstall tonight. We will see how it goes. If not, i just don't know. All I have is stock 1.5 and RSRDC_SH15_v400. I don't know what else to tell you.

Let me try my reinstall and we'll see. I can take pictures and post what mods I have and the problem with the guns ... ??? This is the ONLY mod I have installed ... I am not kidding.
Well I can't "fix" what I can't recreate, also are you removing the SH4 directory from "My Documents", if the answer is no then you need to for a clean install.
lurker_hlb3 is offline   Reply With Quote
Old 02-19-09, 07:09 PM   #5
Scharnhorst1943
Seaman
 
Join Date: Aug 2007
Posts: 40
Downloads: 114
Uploads: 0
Default

Quote:
Originally Posted by lurker_hlb3
Well I can't "fix" what I can't recreate, also are you removing the SH4 directory from "My Documents", if the answer is no then you need to for a clean install.
This was the problem. I got it it fixed now ... however, I am having another issue for the Narwhal / Nautilus submarine.

When I start a campaign on Dec. 6, 1941 at Pearl Harbor, when I go to mission, I get a message from my crew that says, "Cannot Comply!"

I assign a speed or a heading and the crew says, "Cannot Comply." It is like I don't have enough men in the engine room, but I do.
Scharnhorst1943 is offline   Reply With Quote
Old 02-19-09, 07:33 PM   #6
lurker_hlb3
Admiral
 
Join Date: Apr 2005
Location: San Diego Calif
Posts: 2,290
Downloads: 187
Uploads: 12
Default

Quote:
Originally Posted by Scharnhorst1943
Quote:
Originally Posted by lurker_hlb3
Well I can't "fix" what I can't recreate, also are you removing the SH4 directory from "My Documents", if the answer is no then you need to for a clean install.
This was the problem. I got it it fixed now ... however, I am having another issue for the Narwhal / Nautilus submarine.

When I start a campaign on Dec. 6, 1941 at Pearl Harbor, when I go to mission, I get a message from my crew that says, "Cannot Comply!"

I assign a speed or a heading and the crew says, "Cannot Comply." It is like I don't have enough men in the engine room, but I do.
I've recreated your problem, recommended you use a different class of sub
lurker_hlb3 is offline   Reply With Quote
Old 02-19-09, 08:02 PM   #7
Scharnhorst1943
Seaman
 
Join Date: Aug 2007
Posts: 40
Downloads: 114
Uploads: 0
Default

Quote:
Originally Posted by lurker_hlb3
I've recreated your problem, recommended you use a different class of sub
I don't want to come across as pushy, but I am just curious ... Is there going to be a fix for this latest thing, or no? Like I said, just curious
Scharnhorst1943 is offline   Reply With Quote
Old 02-19-09, 08:08 PM   #8
lurker_hlb3
Admiral
 
Join Date: Apr 2005
Location: San Diego Calif
Posts: 2,290
Downloads: 187
Uploads: 12
Default

Quote:
Originally Posted by Scharnhorst1943
Quote:
Originally Posted by lurker_hlb3
I've recreated your problem, recommended you use a different class of sub
I don't want to come across as pushy, but I am just curious ... Is there going to be a fix for this latest thing, or no? Like I said, just curious
I'm working on a fix right now. If there are serious problems, I "always" fix them right away

Last edited by lurker_hlb3; 02-19-09 at 09:20 PM.
lurker_hlb3 is offline   Reply With Quote
Old 02-20-09, 02:16 AM   #9
Red Devil
The Old Man
 
Red Devil's Avatar
 
Join Date: May 2004
Location: Sutton Coldfield England
Posts: 1,540
Downloads: 305
Uploads: 0
Default

Quote:
Originally Posted by lurker_hlb3
Quote:
Originally Posted by Scharnhorst1943
Quote:
Originally Posted by lurker_hlb3
Well I can't "fix" what I can't recreate, also are you removing the SH4 directory from "My Documents", if the answer is no then you need to for a clean install.
This was the problem. I got it it fixed now ... however, I am having another issue for the Narwhal / Nautilus submarine.

When I start a campaign on Dec. 6, 1941 at Pearl Harbor, when I go to mission, I get a message from my crew that says, "Cannot Comply!"

I assign a speed or a heading and the crew says, "Cannot Comply." It is like I don't have enough men in the engine room, but I do.
I've recreated your problem, recommended you use a different class of sub
try the I-27
__________________
>
>
Captain!, there's a destroyer on the por........ periscope is flooded Sir!
>
Darkness is only the absence of Light; Ignorance is only the absence of knowledge ©

www.worldwartwo.uk
www.captainwalker.uk
Red Devil is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:25 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1995- 2025 Subsim®
"Subsim" is a registered trademark, all rights reserved.