SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997 |
04-18-14, 06:02 PM | #3166 |
Black Magic
|
v1.0.163.0 released. See post #1
Starting with v1.0.163.0 added a new game file to the patcher: EnvSim.act. Added two new patches to EnvSim: wind speed allowed to be set to 0m/s and max allowable wind speed increased to 60m/s (stock game was 15m/s). NOTE: MissionEditor2 will only allow you to specify 15m/s for wind speed so you'll have to hand edit the file to attain > 15m/s wind speed |
04-18-14, 06:06 PM | #3167 |
Samurai Navy
|
Can someone make a video of how windspeed 60 looks in the game?
|
04-18-14, 07:37 PM | #3168 |
Ace of the deep .
|
|
04-19-14, 01:58 AM | #3169 |
Commodore
Join Date: Apr 2005
Posts: 641
Downloads: 276
Uploads: 0
|
Thx for the new Patch @TDW!!
I used the TDW bullet spark mission for a little test with 40m/s It was no fun for all parties involved. The speedboats did self-ignite very soon. This sounds worser as it should be for campaign. my guess is the'd never shown up in that conditions what sounds reasonable. Before they would get in visual range they are should be destroyed by the waves. Esp. in combination with the additional render distance patch. I set mine now to add. 80KM around my submarine, TDW even reportet that this runs fine on his crappy AMD system. Further I'm using dynamic environment mod with the additional gap wave mechanics. So my boat does not go much "under the waves" it "rides" them - what i like. Don't now if this is stock game, stock Dyn. Env. or cause off the wave mechanics addon - i like it how it is. So thx TDW for this cool update!! How to make the wind that strong in camapign? Edit: sorry just saw it's "Wave Mechanics - Gale (Improved)" what i use.
__________________
nie das Boot verlassen Last edited by Gammel; 04-19-14 at 02:09 AM. |
04-19-14, 11:26 AM | #3170 | |||
Navy Seal
Join Date: Jan 2011
Location: CJ8937
Posts: 8,215
Downloads: 793
Uploads: 10
|
Quote:
Quote:
Several sea units will need their physics settings tweaked for them to handle the heavy waves brong in game by the new patch by TDW. I could also set some new weather zones with wind ranges restricted to max 15 m/s or lesser, and use them for coastal waters, where patrol boats and small cargo vessels are more likely to occurr. Moreover we can try to play with Waves amplitude and Waves attenuation parameters (Sim.cfg), and with FarWavesScale and FarWavesStrength parameters (SeaParameters.cfg) for avoiding that during storms ships spawning far away from player's sub sink before we could even spot them. Last, I will have to adjust the current DynEnv weather zones, in order to allow wind speeds higher than 15 m/s in open seas (otherwise TDW's patch won't have any effect in campaign). We should nonetheless consider that wind speeds in the 40-60 m/s range are extremely unlikely in reality. Going by the Beaufort scale, Hurricanes (i.e. Beaufrt 12, the top end of the scale) occur at wind speeds of 32.7 m/s or higher, with wave heights ≥ 14 m/s but if you look at the wave charts linked at post #2 of DynEnv's thread, the max averaged seasonal wind speeds hardly exceed 12 m/s, with a max standard deviation of about 5 m/s Quote:
Other than that, DynEnv has little to do with the way AI/playable units ride waves: other parameters which are not affected by DynEnv (i.e. units' drag, mass, center of mass, etc.) come into consideration. I think I have already answered your question, at least in part, when I discussed weather zones (each got its own wind speed range, varying depending on season). There is one last aspect that I have not fully clear though: SeaParameters.cfg contains the wave settings for several wind speeds. The game interpolates automatically the settings of two contiguous wind speeds set in the cfg file, when a given wind speed comprised between the two above is not present in the said file. Indeed, the stock SeaParameters.cfg and the versions of the same file included in Dynamic Environment (in form of different 'Wave Mechanics' submods), have 15 m/s as maximum set wind speed. That is okay for stock game, as 15 m/s is the maximum attainable wind speed anyway. What I ignore is how the game can handle the new speeds achieved with the patch by TDW, since in the currently available cfg files there are no top end settings that can be interpolated for speeds higher than 15 m/s. In any case, I think we should create a new SeaParameters.cfg with wave settings going from 0 to 60 m/s, in steps of 5 or 10 m/s, so to be sure that the game applies the desired settings. Last edited by gap; 04-19-14 at 11:38 AM. |
|||
04-19-14, 12:28 PM | #3171 |
Navy Seal
|
Starting with v1.0.152.0 added a new patch to the SHSim.act file: Artillery (coastal defenses) and anti-aircraft units able to acquire and track contacts
- added a new patch to SHSim.exe: Coastal defense sub loops - Allows coastal defenses to detect subs that are submerged and/or in heavy fog I'm a bit confused... Will Coastal defenses actually attack me or not? According to my test mission they won't ?
__________________
Best regards... Vecko The Wolves of Steel v2.2.25_SH5 Expansion Pack_Full The Wolves of Steel v2.2.xx to v2.2.25 - Update PDF Install Instructions How to report an issue If You wish to support my work... |
04-19-14, 01:12 PM | #3172 |
Ocean Warrior
|
Thank you, sir
Amazing work.. as always.. That's Ru manual for the latest version - http://www.mediafire.com/download/t6...-_v1.0.163).7z PS: It seems the game becomes more exciting and fascinating Maybe it's time to get back
__________________
. Where does human stupidity end? . El sueño de la razón produce monstruos © - and for some people awakening will be cruel |
04-19-14, 11:26 PM | #3173 | |
Black Magic
|
Quote:
Even though you may have this patch enabled it will not 'work' until the coastal defenses are setup to use it. Currently no coastal defenses are setup to use this patch. |
|
04-19-14, 11:28 PM | #3174 |
Black Magic
|
A GlobalWind controller needs to be added to every flag that you want the patch to control. That means you need to edit the Flags.dat file and add this controller to every flag in it Also any item that has _FLG in it's name that you want the patch to control has to have a GlobalWind controller attached to it.
|
04-19-14, 11:41 PM | #3175 | |
Black Magic
|
Quote:
Currently you can't use the Sextant at any higher angles of elevation. I have been working on this for the past 3 days and have finally figured out a way to let you measure ANY angles of elevation with the Sextant The way the Sextant is going to work will be changing here soon when I revise the Stadimeter as Sextant patch. What will be changing is you'll be able to pitch the sextant up much higher - all the way to 75 degrees. The patch will keep track of the camera's (Sextant) pitch angle and will add this value to any value you measure (using the Stadimeter as sextant). Confused? Let's say you have a heavenly body at 68 degrees of elevation from the waterline. You place the sextant just below the heavenly body you want to measure. Let's say that angle is 60 degrees. You then press the Stadimeter button to activate the Sextant measuring. You place the second line on the heavenly body and press the left mouse button to record the measurement and it comes out to be 8 degrees. The navigator will take the base measurement (60 degrees from the waterline) and add it to the Sextant measurement (8 degrees) thus giving the true angle from the waterline (68 degrees) Now theoretically you could just move the sextant right onto the heavenly body and read the measurement. The only problem with doing this is you lose precision. By pressing the stadimeter button you can press and hold Ctrl while moving the sextant to get better precision If this still doesn't make sense then it will when you go to use the Sextant with the revised Stadimeter as Sextant patch. |
|
04-20-14, 05:24 AM | #3176 | |
Count Dracula
|
Quote:
__________________
|
|
04-20-14, 06:24 AM | #3177 | |
Nub
Join Date: Dec 2013
Posts: 2
Downloads: 148
Uploads: 0
|
Quote:
|
|
04-20-14, 07:02 AM | #3178 |
Sea Lord
Join Date: Jun 2008
Location: Noch dabei
Posts: 1,732
Downloads: 618
Uploads: 0
|
|
04-20-14, 09:38 AM | #3179 | |
Navy Seal
|
Quote:
__________________
Best regards... Vecko The Wolves of Steel v2.2.25_SH5 Expansion Pack_Full The Wolves of Steel v2.2.xx to v2.2.25 - Update PDF Install Instructions How to report an issue If You wish to support my work... |
|
04-20-14, 09:57 AM | #3180 | |
Navy Seal
|
Quote:
TDW, you developed before similar patch which will prevent high underwater speed with raised snorkel... Could you apply same principle for periscopes and limit submarine speed to something like 3-4 knots, without much to work on ? That would be rally cool, I've been waiting this fix for ages now...
__________________
Best regards... Vecko The Wolves of Steel v2.2.25_SH5 Expansion Pack_Full The Wolves of Steel v2.2.xx to v2.2.25 - Update PDF Install Instructions How to report an issue If You wish to support my work... Last edited by vdr1981; 04-20-14 at 03:16 PM. |
|
Thread Tools | |
Display Modes | |
|
|