![]() |
SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997 |
|
![]() |
#1 |
Seaman
![]() Join Date: May 2012
Posts: 39
Downloads: 9
Uploads: 0
|
![]() Quote:
I promise to have a tutorial in as soon as possible! |
![]() |
![]() |
![]() |
#2 |
Silent Hunter
![]() Join Date: Dec 2004
Location: AN9771
Posts: 4,904
Downloads: 304
Uploads: 0
|
![]()
I got my disk also today. I connected the spare pegs with a string through the center peg. Those are easier to hold and turn the middle ring by the holes.
__________________
My site downloads: https://ricojansen.nl/downloads |
![]() |
![]() |
![]() |
#3 |
GWX - KC Crash Test Dummy
|
![]()
Hi Pisces good call drilling the pegs and threading string through am i right in thinking that the inner disc does'nt need to turn so one could glue the inner disc to the baseboard and also the four pegs attached to the plastic rods on that inner disc
|
![]() |
![]() |
![]() |
#4 |
Silent Hunter
![]() Join Date: Dec 2004
Location: AN9771
Posts: 4,904
Downloads: 304
Uploads: 0
|
![]()
Yes, the center disk is supposed to be fixed, as is the outside ring. I guess you could glue it fixed. Only the one inbetween must rotate. So long the pegs don't come loose I don't think it is needed to glue. I first want to keep it so I can disassemble it. I used some parafin/candle wax to lubricate the surfaces and want to see how that holds up.
__________________
My site downloads: https://ricojansen.nl/downloads |
![]() |
![]() |
![]() |
#5 |
Bosun
![]() Join Date: Jun 2013
Posts: 66
Downloads: 66
Uploads: 0
|
![]()
Gents and Ladies: I thought you might like to know the meaning of the German Phrases on the various wheels.
Rad = Wheel; lage rad= Bearing wheel; Peilung rad= Course wheel; Zeit Rad Rack= Time wheel; Lage b. ShuB= location of shot; Kurs = Course; Vorhlat=deriviative; Vorkaltwindrel= lead angle; Einst= one; Gegnerkurse= opponent course; optische Lange= optical (takes into account the ship at an angle to determine compared to physical length of ship; CyStryker |
![]() |
![]() |
![]() |
#6 |
Bosun
![]() Join Date: Jun 2013
Posts: 66
Downloads: 66
Uploads: 0
|
![]()
I took digital copies of templates for the front and back of the disk stored on a thumb drive to Office Depot. I believe the disks are the front and back of the "Attack Disk". The tech was able to print the individual wheels of the two disks based upon a 200 mm maximum diameter. of the outer wheel of each disk. We printed them in color on heavy gloss white stock. They both came out perfectly. I had the transparencies printed to match the size of the wheels. I printed enough material for 4 disks at a cost of $22.00. I need to do the following: I need to find ,.. I think Home Depot has it... acrylic sheets to stiffen up the transparent items, clear glue and a pin system that will pin the wheels in the center that will not tear the paper wheels. I plan on adding the acrylic sheet to the back of the outer wheel in each disk and glue it to the wheel. Please note I did not cut away the pper from the inside of the wheels...including the outer wheels.... So when I glue the acrylic backing it will stiffen the entire disk therefore it should allow me to pick up the disks and hold in a vertical position. After I complete the task I will post the results on line with required info on diameters of each wheel.
I have a riveting device which I think will lend itself nicely to safely pin the wheels of each disk together in the center and allow free movement ( I need to determine what wheels should be fixed and glue that wheel in place). With the rivet I can secure different lengths and diameter rivets... armed with stainless washers I should be able to secure the wheels in the center without damaging the paper wheels. I still can not find my first disk I made when I first started playing SH3:<) Roland/CyStryker Last edited by rolandslaw; 04-26-19 at 03:28 PM. |
![]() |
![]() |
![]() |
#7 | |
Grey Wolf
![]() |
![]() Quote:
Lage Rad = AOB Wheel Peilung Rad = Bearing Wheel Lage b. Schuß = AOB at the moment of the shot Vorhalt = shoot bearing Vorhaltwinkel = lead angle (gyro angle) Optische Länge = optical length ![]()
__________________
Ask me anything about the Type VII or IX! One-Stop Targeting Shop: https://drive.google.com/drive/folde...WwBt-1vjW28JbO My YT Channel: https://www.youtube.com/channel/UCIJ...9FXbD3S2kgwdPQ |
|
![]() |
![]() |
![]() |
#8 |
Bosun
![]() Join Date: Jun 2013
Posts: 66
Downloads: 66
Uploads: 0
|
![]()
Derstrosstrup:
Thank you for feed back.... :<) I will add this to my list I have. Roland / CyStryker |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|