ARB WideGui 1920x1080 - Page 4

Wolfcat · 07-17-18, 10:19 PM

I am new to this mod. Just a few questions for clarification:

1. Installation: please correct me if I am wrong. I extract all files in "ARB WideGUI 1920x1080" into the game folder. Extract Tycho files. And run Tycho bat. DO NOT use JSGM mod enabler, correct? The 3.01 hotfix can be applied using JSGM?

2. Based on Tycho's instructions. If we want H.sie patch, we need do that patch first before Tycho's bat file, correct?

3. Is this mod compatible with GWX?

4. Can I still use FM_New Interior mod with this?

tofoftofof · 07-18-18, 09:40 PM

Thank you for your work improving the AH widescreen gui!

Can you fix the broken tube selection dial on the attack periscope and uzo?
On the Attack Map screen, toggling the salvo selector between T and S changes the tube dial from single tubes to salvo modes. This is good.
However, on the uzo and attack periscope, this doesn't happen, and the tube dial is not functional. This is bad.

This is particularly important since changing tubes with that dial is the only way I know of to keep the tubes from closing themselves.

Niume · 07-19-18, 12:48 PM

Can I use this mod with FM interiors? is there a patch I tried it but the periscope lines are messed up

Wolfcat · 07-19-18, 01:17 PM

Quote:

Originally Posted by Niume

Can I use this mod with FM interiors? is there a patch I tried it but the periscope lines are messed up

I remember reading someone had similar issue. But it was with another widescreen gui. What he did was he installed FM-interior first and then the new widescreen gui. But that way, you lose the FM's shortcut key commands. Not sure if you would still be able to move around the sub anymore.

tofoftofof · 07-19-18, 01:29 PM

How does one use the chronometer/stopwatch that's draggable from the bottom right corner? I can't seem to start or stop it.

ThePrody · 07-19-18, 03:19 PM

it shows the main chronometer , when that one is working the draggable one works too , the idea is to watch the chronometer in other menus also without the need to switch to periscope, for example .

Wolfcat · 07-19-18, 08:51 PM

Just was able to get this thing install. This is an awesome mod and has a lot of potential. Please keep up your good work

tofoftofof · 07-19-18, 10:16 PM

Unfortunately this is missing all the fixes that Izgud made for the Ahnenerbe gui!

It has doubled TDC dial labels in the attack map, which he had fixed.
Crew talks when using pgup or pgdn to adjust periscope, which he had fixed.

It lacks the added RPM chart at the hydrophone station.

I haven't checked the RAOBF mark (which was wrong in Ahnenerbe), but I suspect it will be wrong here too.

I also notice that there are two sets of reticles inside the UZO, and that the scale of the reticles in the Obs scope and Attack scope are wildly different.

Fifi · 07-31-18, 10:19 AM

Impossible to get it working correctly.

GWX3 no mods, installed to the letter, my nav map is screwed up in 2 parts by the middle screen, and my sub is showing even not on sea...

Don’t Understand, i patched it after the H.sie patch as commanded.

Back with Ahnenerbe GUI wich is working perfect.

Niume · 07-31-18, 02:08 PM

You done something wrong. Try removing the patch with Remove.bat and then again reaplying it. Fixed for me

Fifi · 08-01-18, 02:01 AM

Thanks, i’ll Give a try again

Fifi · 08-01-18, 04:03 AM

Still not working. Tried everything possible.

All gui is fine except the nav map wich is unplayable. And without nav map...

No big deal though, Ahnenerbe is running fine.

barnacleboy · 08-13-18, 11:17 PM

@Brodaga222 Great mod, works fine for me. But would it be possible to add a full functional RAOBF and the attack disk? greetings .....

Aktungbby · 08-14-18, 09:30 AM

barnacleboy!

barnacleboy · 08-14-18, 03:38 PM

thx Aktungbby

So I found the attack disk ... but the disk only appear when a targed is locked. Is this intended? I think this is a huge limitation of the disk.

07-19-18, 12:48 PM	#48
Niume Sea Lord Join Date: Sep 2015 Location: Lithuania Posts: 1,637 Downloads: 503 Uploads: 2	Can I use this mod with FM interiors? is there a patch I tried it but the periscope lines are messed up __________________ GLORY TO UKRAINE! [ENG] SH 4 KSD II Ace Edition

07-31-18, 10:19 AM	#54
Fifi Navy Seal Join Date: Dec 2012 Location: France Posts: 6,094 Downloads: 466 Uploads: 0	Impossible to get it working correctly. GWX3 no mods, installed to the letter, my nav map is screwed up in 2 parts by the middle screen, and my sub is showing even not on sea... Don’t Understand, i patched it after the H.sie patch as commanded. Back with Ahnenerbe GUI wich is working perfect. __________________ https://www.mediafire.com/file/rfw2h...N_V7.8.7z/file

07-31-18, 02:08 PM	#55
Niume Sea Lord Join Date: Sep 2015 Location: Lithuania Posts: 1,637 Downloads: 503 Uploads: 2	You done something wrong. Try removing the patch with Remove.bat and then again reaplying it. Fixed for me __________________ GLORY TO UKRAINE! [ENG] SH 4 KSD II Ace Edition Last edited by Niume; 07-31-18 at 02:25 PM.

08-01-18, 02:01 AM	#56
Fifi Navy Seal Join Date: Dec 2012 Location: France Posts: 6,094 Downloads: 466 Uploads: 0	Thanks, i’ll Give a try again __________________ https://www.mediafire.com/file/rfw2h...N_V7.8.7z/file

08-01-18, 04:03 AM	#57
Fifi Navy Seal Join Date: Dec 2012 Location: France Posts: 6,094 Downloads: 466 Uploads: 0	Still not working. Tried everything possible. All gui is fine except the nav map wich is unplayable. And without nav map... No big deal though, Ahnenerbe is running fine. __________________ https://www.mediafire.com/file/rfw2h...N_V7.8.7z/file

07-17-18, 10:19 PM	#46
Wolfcat Chief Join Date: Nov 2012 Posts: 325 Downloads: 27 Uploads: 0	I am new to this mod. Just a few questions for clarification: 1. Installation: please correct me if I am wrong. I extract all files in "ARB WideGUI 1920x1080" into the game folder. Extract Tycho files. And run Tycho bat. DO NOT use JSGM mod enabler, correct? The 3.01 hotfix can be applied using JSGM? 2. Based on Tycho's instructions. If we want H.sie patch, we need do that patch first before Tycho's bat file, correct? 3. Is this mod compatible with GWX? 4. Can I still use FM_New Interior mod with this?

07-18-18, 09:40 PM	#47
tofoftofof Swabbie Join Date: Mar 2010 Posts: 8 Downloads: 123 Uploads: 0	Thank you for your work improving the AH widescreen gui! Can you fix the broken tube selection dial on the attack periscope and uzo? On the Attack Map screen, toggling the salvo selector between T and S changes the tube dial from single tubes to salvo modes. This is good. However, on the uzo and attack periscope, this doesn't happen, and the tube dial is not functional. This is bad. This is particularly important since changing tubes with that dial is the only way I know of to keep the tubes from closing themselves.

07-19-18, 01:29 PM	#50
tofoftofof Swabbie Join Date: Mar 2010 Posts: 8 Downloads: 123 Uploads: 0	How does one use the chronometer/stopwatch that's draggable from the bottom right corner? I can't seem to start or stop it.

07-19-18, 03:19 PM	#51
ThePrody not dead yet Join Date: May 2017 Location: Romania Posts: 193 Downloads: 130 Uploads: 1	it shows the main chronometer , when that one is working the draggable one works too , the idea is to watch the chronometer in other menus also without the need to switch to periscope, for example .

07-19-18, 08:51 PM	#52
Wolfcat Chief Join Date: Nov 2012 Posts: 325 Downloads: 27 Uploads: 0	Just was able to get this thing install. This is an awesome mod and has a lot of potential. Please keep up your good work

07-19-18, 10:16 PM	#53
tofoftofof Swabbie Join Date: Mar 2010 Posts: 8 Downloads: 123 Uploads: 0	Unfortunately this is missing all the fixes that Izgud made for the Ahnenerbe gui! It has doubled TDC dial labels in the attack map, which he had fixed. Crew talks when using pgup or pgdn to adjust periscope, which he had fixed. It lacks the added RPM chart at the hydrophone station. I haven't checked the RAOBF mark (which was wrong in Ahnenerbe), but I suspect it will be wrong here too. I also notice that there are two sets of reticles inside the UZO, and that the scale of the reticles in the Obs scope and Attack scope are wildly different.

08-13-18, 11:17 PM	#58
barnacleboy Swabbie Join Date: Aug 2018 Posts: 6 Downloads: 8 Uploads: 0	@Brodaga222 Great mod, works fine for me. But would it be possible to add a full functional RAOBF and the attack disk? greetings ..... Last edited by barnacleboy; 08-13-18 at 11:28 PM.

08-14-18, 09:30 AM	#59
Aktungbby Gefallen Engel U-666 Join Date: Jul 2013 Location: On a tilted, overheated, overpopulated spinning mudball on Collision course with Andromeda Galaxy Posts: 30,051 Downloads: 24 Uploads: 0	welcome aboard! barnacleboy! __________________ "Only two things are infinite; The Universe and human squirrelyness?!!

08-14-18, 03:38 PM	#60
barnacleboy Swabbie Join Date: Aug 2018 Posts: 6 Downloads: 8 Uploads: 0	thx Aktungbby So I found the attack disk ... but the disk only appear when a targed is locked. Is this intended? I think this is a huge limitation of the disk.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode