[REL] Hitman GUI 1.0 for NYGM3 and GWX3 (Pic Heavy!) - Page 5

04-08-10, 02:51 AM

@Hitman

Sorry, I didn't realise the bottom part of the GUI screen was that time consuming to mod. If you look at the following pictures from WAC and LSH3...

WAC: http://img72.imageshack.us/i/newrepairtimesyh0.jpg/

LSH3: http://www.lsh3.com/album/v5/bilder/...sixdial09.html

you'll see the bottom is quite minimalist. I'm not sure who created the original mod but perhapps it could be incorporated into your GUI mod ?

What do you think ?

Cheers, UG

Der Teddy Bar · 04-08-10, 05:12 AM

Quote:

Originally Posted by Hitman

Holy cow! Watch out, DTB is back with a vengance!!!

Glad to see you back in the SH3 scene mate

Guess who's back, back again
Teddy's back, tell a friend
Guess who's back, guess who's back,
guess who's back, guess who's back,
guess who's back, guess who's back,
guess who's back...

A couple of days using your GUI and the more I use it the more I think it rocks.

Keep up the good work and I I'll be keeping a keen eye out for the updates.

Hitman · 04-08-10, 08:28 AM

Quote:

Ahum!! Bump:

LOL OK, seems I forgot to add the marker. Another thing in the updates list ...

Anyway, once you click and drag the cursor you will see it rotating until it arrives to the vertical fashion, pointing where yoru uboat is heading to. It is not precise in very heavy weather, though

I'll add it

Pisces · 04-08-10, 05:24 PM

Yeah, I know, small detail. But since this vernier scale is allready very unusual some people might not know what to do with it or figure out how to read it out.

Flopper · 04-08-10, 07:54 PM

Is it true there is no recognition manual at all, or something I've done?

arnahud2 · 04-08-10, 11:37 PM

Hi, what a great mod !!!

I have just two "little" troubles with it : the 3 dials on right bottom don't appear, except for the needles...

Secondly, depth and speedometer big slidout dials don't appear too. Just the big slideout compass (with its needle

!)...

I checked "menu_1024_768.ini" before and after applying hitman's GUI, no problem found here.

I tried with different "camera.dat" file, nothing better...

Reverting to GWX gold "stock" GUI : no problem.

I tried the excellent Raptor's Interface : no problem too...

What's the trouble, what's the trouble, what's the trouble

Could someone help me, please ?

Stiebler · 04-09-10, 06:11 AM

Hi Hitman,

Another minor item for the update list...

Could you move the wooden bar ('wooden-part'), on the top transparent triangle, a little bit down, towards the bottom of the triangle, please?

Then the whole triangle can be moved by the user further up, off the top off the screen, when not required, freeing a lot of 'real estate' (well, sea anyway) when in map (F5) mode.

Thanks. (I've had no problems at all with the mod in constant use, by the way.)

Stiebler.

Hitman · 04-09-10, 07:05 AM

Quote:

Is it true there is no recognition manual at all, or something I've done?

The RM is still there and can be seen by pressing the "N" key. I found it useless, though, because with IABL's ships augmenting significatively the number of vessels, and without stadimeter, it is a boring thing to go around flipping pages with no real use of interest.

Quote:

I have just two "little" troubles with it : the 3 dials on right bottom don't appear, except for the needles...

Secondly, depth and speedometer big slidout dials don't appear too. Just the big slideout compass (with its needle

!)...

That's very weird. If you don't get what the pictures in the first post show, then either your download is broken or you installed something else that broke the mod. Be sure to install the GUI mod last, that should guarantee it works OK.

Quote:

Could you move the wooden bar ('wooden-part'), on the top transparent triangle, a little bit down, towards the bottom of the triangle, please?

Then the whole triangle can be moved by the user further up, off the top off the screen, when not required, freeing a lot of 'real estate' (well, sea anyway) when in map (F5) mode.

Sure it can be done, I just left it there because it's the real part of the ruler where it is. But as long as it doesn't interfere with the scales, I suppose it's OK to move it downwards.

geosub1978 · 04-10-10, 04:28 AM

Hi!
I just installed this GUI to WAC 4.1 and so far seems to work

!!

Hitman, to make life easier, I suggest this for you Wiz wheel:

Have the outer cyrcle fixed on 000, and add a true coarse cyrcle as a thin outter cyrcle that will follow your coarse just like compass. This way you will be able to use the wheel, independed from TDC, etc, while doing exact the same things and will help you choose your coarses in a more "man oriented" way.

Finally a centered-man rotated rotating cross, with pointers at each end and length=diameter of the wheel, will help someone define and choose coarses like 90degress approach, downthroat, etc.

rea00cy · 04-12-10, 12:59 AM

Quote:

Originally Posted by sergei

Just FYI Chisum and Hitman -

I have been using Hitman's GUI on top of the Open Hatch mod, and they work together fine.
It doesn't break anything

Hi, Sergei:

Do you mean DD's Open Hatch or Luca's CT open Hatch? I'm having trouble with the last one and this mod.
In any case, has anyone tried these two mods compatibility (Hitman's optics and CT OH)?.
Any suggestion will be greatly appreciated.

Thanks, rea00cy

Hitman · 04-12-10, 01:35 AM

The only incompatible files between this GUI and the OH mods is the cameras.dat

If you install this mod over OH you'll still get the open hatch in the game, but the reworked cameras angles and special properties of free camera, etc. will be lost. Otherwise all will work OK.

Weisia · 04-12-10, 05:47 AM

Hi,

I have a problem with the tdc and stopwatch icons. When I click the stopwatch icon next to the periscope the RM opens. When I try to click the tdc button nothing happens. I don't know if the FAT button is working properly because I am still in '39.

Hitman · 04-12-10, 11:09 AM

Quote:

I have a problem with the tdc and stopwatch icons. When I click the stopwatch icon next to the periscope the RM opens. When I try to click the tdc button nothing happens. I don't know if the FAT button is working properly because I am still in '39.

Look like a corrupted install, my bet is that you enabled another mod after my GUI, whose menu-ini overwrote mine. Run JSGME, disable my GUI and enable it again so it overwrites any existing mod.

Being in 1939 has nothing to do with the TAFT settings panel, you will open it but inly the torpedo depth and other dials from the lower part will work. No other secondary effects at all.

Stiebler · 04-12-10, 01:30 PM

I thought I'd save you a bit of trouble, Hitman.

Just change the settings in menu_1024_768.ini as follows:
[G31 I25]
Pos=400,740,200,25 (was 700,770,200,25)
[G31 I27]
Pos=-239,274,676,338 (was -239,244,676,338)

This works fine for me, and does not obscure the markings on the triangle. Moving the triangle upwards when it is not in use now means that only 5% of the sea area in map mode (F5) is now obscured by the triangle.
Previously, 10% was obscured, which is quite a lot.

An alternative solution might be to leave the 'wooden_part' where it is (ie, in realistic position), but to make the entire triangle draggable, instead of having to drag the 'wooden_part'.

Stiebler.

Hitman · 04-12-10, 02:45 PM

Quote:

An alternative solution might be to leave the 'wooden_part' where it is (ie, in realistic position), but to make the entire triangle draggable, instead of having to drag the 'wooden_part'.

Yes, but in that case you would not be able to draw over it

Thanks for the notes

04-08-10, 05:24 PM	#64
Pisces Silent Hunter Join Date: Dec 2004 Location: AN9771 Posts: 4,904 Downloads: 304 Uploads: 0	Yeah, I know, small detail. But since this vernier scale is allready very unusual some people might not know what to do with it or figure out how to read it out. __________________ My site downloads: https://ricojansen.nl/downloads

04-08-10, 07:54 PM	#65
Flopper Weps Join Date: Jan 2010 Location: Asheville, NC, USA Posts: 356 Downloads: 107 Uploads: 0	Is it true there is no recognition manual at all, or something I've done? __________________

04-08-10, 11:37 PM	#66
arnahud2 Frogman Join Date: Apr 2005 Posts: 308 Downloads: 724 Uploads: 0	Hi, what a great mod !!! I have just two "little" troubles with it : the 3 dials on right bottom don't appear, except for the needles... Secondly, depth and speedometer big slidout dials don't appear too. Just the big slideout compass (with its needle !)... I checked "menu_1024_768.ini" before and after applying hitman's GUI, no problem found here. I tried with different "camera.dat" file, nothing better... Reverting to GWX gold "stock" GUI : no problem. I tried the excellent Raptor's Interface : no problem too... What's the trouble, what's the trouble, what's the trouble Could someone help me, please ? __________________

04-09-10, 06:11 AM	#67
Stiebler Fuel Supplier Join Date: Oct 2005 Location: London, UK Posts: 1,237 Downloads: 29 Uploads: 4	Hi Hitman, Another minor item for the update list... Could you move the wooden bar ('wooden-part'), on the top transparent triangle, a little bit down, towards the bottom of the triangle, please? Then the whole triangle can be moved by the user further up, off the top off the screen, when not required, freeing a lot of 'real estate' (well, sea anyway) when in map (F5) mode. Thanks. (I've had no problems at all with the mod in constant use, by the way.) Stiebler. __________________ NYGM Tonnage War Mod - More than a mod: it's an experience!

04-10-10, 04:28 AM	#69
geosub1978 Samurai Navy Join Date: Oct 2006 Location: Salamis Base Posts: 567 Downloads: 229 Uploads: 0	Hi! I just installed this GUI to WAC 4.1 and so far seems to work!! Hitman, to make life easier, I suggest this for you Wiz wheel: Have the outer cyrcle fixed on 000, and add a true coarse cyrcle as a thin outter cyrcle that will follow your coarse just like compass. This way you will be able to use the wheel, independed from TDC, etc, while doing exact the same things and will help you choose your coarses in a more "man oriented" way. Finally a centered-man rotated rotating cross, with pointers at each end and length=diameter of the wheel, will help someone define and choose coarses like 90degress approach, downthroat, etc. __________________

04-08-10, 02:51 AM	#61
Uber Gruber Stowaway Posts: n/a Downloads: Uploads:	@Hitman Sorry, I didn't realise the bottom part of the GUI screen was that time consuming to mod. If you look at the following pictures from WAC and LSH3... WAC: http://img72.imageshack.us/i/newrepairtimesyh0.jpg/ LSH3: http://www.lsh3.com/album/v5/bilder/...sixdial09.html you'll see the bottom is quite minimalist. I'm not sure who created the original mod but perhapps it could be incorporated into your GUI mod ? What do you think ? Cheers, UG

04-12-10, 01:35 AM	#71
Hitman Pacific Aces Dev Team Join Date: Sep 2002 Location: Spain Posts: 6,109 Downloads: 109 Uploads: 2	The only incompatible files between this GUI and the OH mods is the cameras.dat If you install this mod over OH you'll still get the open hatch in the game, but the reworked cameras angles and special properties of free camera, etc. will be lost. Otherwise all will work OK. __________________ One day I will return to sea ...

04-12-10, 05:47 AM	#72
Weisia A-ganger Join Date: Jan 2009 Posts: 71 Downloads: 65 Uploads: 0	Hi, I have a problem with the tdc and stopwatch icons. When I click the stopwatch icon next to the periscope the RM opens. When I try to click the tdc button nothing happens. I don't know if the FAT button is working properly because I am still in '39.

04-12-10, 01:30 PM	#74
Stiebler Fuel Supplier Join Date: Oct 2005 Location: London, UK Posts: 1,237 Downloads: 29 Uploads: 4	Moving the 'wooden_part' down on its triangle. I thought I'd save you a bit of trouble, Hitman. Just change the settings in menu_1024_768.ini as follows: [G31 I25] Pos=400,740,200,25 (was 700,770,200,25) [G31 I27] Pos=-239,274,676,338 (was -239,244,676,338) This works fine for me, and does not obscure the markings on the triangle. Moving the triangle upwards when it is not in use now means that only 5% of the sea area in map mode (F5) is now obscured by the triangle. Previously, 10% was obscured, which is quite a lot. An alternative solution might be to leave the 'wooden_part' where it is (ie, in realistic position), but to make the entire triangle draggable, instead of having to drag the 'wooden_part'. Stiebler. __________________ NYGM Tonnage War Mod - More than a mod: it's an experience!