Sound Emission

[Niume]

Hello I am new to this game I am playing with RA mod but I don't have any idea how to know how much noise each class of submarine emit. I like to play qiuck missions So I love choosing subs. And What is best speed for staying silent?

Ugh, I wrote a ten minute post, then hit the wrong button, all gone.
fml.


Quickly:
In general, US subs tend to be the quietest, followed by Russians and last the Chinese ones (Han-class for example).
To what measure exactly?
No one here knows, or could disclose, obviously.

As for "safe speeds", with the 688i boats you can stay "silent" up to roughly 8kts in literally dangerous waters. That is the speed I feel still safe enough when some contacts are >10nm out. Any closer, I go to 5kts, which seems to be the standard lurking speed. For transit in unknown waters, I do not exceed 15kts, and for transit when I assume the area is largely clear, I go as fast as the port (not starboard) towed array allows before washout.
I think that is around 25kts, and hence easy to remember (5, 15, 25).

If you don't know, the two TA's are different models. TB-16 and TB-23, while the latter one is more sensitive and hence, washes out at lower speeds.
I can't say much about Russian subs, still not much experience in them after all these years.

Hope that at least gives a rough idea?

[p7p8]

I think this is wrong question and i will try to show you why.

Nuclear submarines are noiser at low speed than conventional but at higher speed they are quieter. Thats because nuclear subs are designed for going faster.

For example:
Which sub is noiser on screen below: LA or Kilo?



Some rules about noise

1) SSN > SSK at low speed
2) older sub > modern sub
3) SSBN > SSN > SSK (but Ohio class is very quiet in full spectrum of speed)

Of coures there are some exceptions (like Ohio)

=======

To what measure exactly?
No one here knows, or could disclose, obviously.

Its not true. I know which sub is noiser and how to measure noise level :P

Originally Posted by CrazyIvan (from RedRodgers forum)

All the noises for the table were taken directly from the game engine through the simulator kernel debugger, by measuring for each platform. At speeds from 0 to maximum speed.

As for "safe speeds", with the 688i boats you can stay "silent" up to roughly 8kts in literally dangerous waters. That is the speed I feel still safe enough when some contacts are >10nm out. Any closer, I go to 5kts, which seems to be the standard lurking speed. For transit in unknown waters, I do not exceed 15kts, and for transit when I assume the area is largely clear, I go as fast as the port (not starboard) towed array allows before washout.
I think that is around 25kts, and hence easy to remember (5, 15, 25).

I completly disagree with Nippelspanner (sorry Nip)
In my opinion NOT DETECTION but IDENTIFICATION is main problem. In DW all sub and surf units have first frequency 50 Hz or 60 Hz, so in reach enviroment and with heavy civilian traffic it gives you nothing!
Of course in isolated area, for example under ice, almost all contacts on NB are probably submarines.

Here you have detected fast moving LA from close range (number 15)



and here detected Kilo



Click on spoiler button

 

As you see, detected submarine could be very hard to identiffication!
(AI can identify your sub without any problems - it is cheating)

=======

In my opinion your speed should be determinated by:
1) situation
2) your own sonars washout

For LA Flt III
- 8 kts for Hull sonar
- 14 kts for Bow sonar
- 19 kts for TB-16 (port) Towed Array

For LA FLT II
- 6 kts Hull
- 12 kts Bow
- 19 kts for TB-16 (port) Towed Array

Akula I imp
- 6 kts Hull
- 8 kts Towed Array
- 13 kts Bow

All submarines have different values for washout Hull, Bow and TA sonars.

=======

Why i think your question is wrong? Let me ask you something:

In Silent hunter which submarine is the quietest?

Is it matter?



Good hunting Niume

Originally Posted by p7p8

Its not true. I know which sub is noiser and how to measure noise level :P

For some reason, I was thinking rl, not ingame.
One can always check the database of course for exact ingame values, yes.

Originally Posted by p7p8

In my opinion your speed should be determinated by:
1) situation
2) your own sonars washout

Which is basically what I said as well?
Not sure what you disagree with.

Edit: clarification.
I did mention that in my first and more detailed draft that I accidentally lost. -.-
Here, I did indeed not.

[p7p8]

Originally Posted by Nippelspanner

One can always check the database of course for exact ingame values, yes.

Checking database is not enough. You have to use debugger.

Originally Posted by Nippelspanner

Which is basically what I said as well?
Not sure what you disagree with.

You suggest to use speed "steps" according to range but i think it is not good tactics.
By "situation" i mean execution for planned earlier action like: transit, monitoring, ambushing, defending, attacking - not distance to enemy.
For actions above you should use speed determined by your sensors.

Yesterday during small MP session, my teammate was sunk because he move too slow for planned action. He thought he was close to the enemy and he have to reduce speed - just like in your guide. That was critical mistake. His LA was hit by iranian version of shkvals from very close and quiet KILO (ambush). After TIW he did not have time to speed up.

Pretending "hole in water" is good only if you make ambush and you are in good place for that. Otherwise slow speed makes you easy target - detection for ASW group is always matter of time.

Originally Posted by p7p8

Checking database is not enough. You have to use debugger.

Where would I get that and what can it do at all?
I started to fool around with editing the game a while ago.

Originally Posted by p7p8

You suggest to use speed "steps" according to range but i think it is not good tactics.
By "situation" i mean execution for planned earlier action like: transit, monitoring, ambushing, defending, attacking - not distance to enemy.
For actions above you should use speed determined by your sensors.

Yesterday during small MP session, my teammate was sunk because he move too slow for planned action. He thought he was close to the enemy and he have to reduce speed - just like in your guide. That was critical mistake. His LA was hit by iranian version of shkvals from very close and quiet KILO (ambush). After TIW he did not have time to speed up.

Pretending "hole in water" is good only if you make ambush and you are in good place for that. Otherwise slow speed makes you easy target - detection for ASW group is always matter of time.

All very true, of course.
However, the OP is new to the game and it seems he needs to learn the ropes first, not sure how useful a plethora of extremely specific details is in that case, and if a simpflified "rule of thumb" might not be enough for the start. But that's up to him.