Waterstreams & Exhaust for GWX VIIC41 Player Sub?

frau kaleun · 01-16-11, 02:12 AM

Was getting the GWX - VIIC41 Player Sub mod sorted to use via Commander only when I opt to play that particular boat, and going through the other mods I usually keep enabled in the game to make sure nothing conflicted just in case it ever got used... noticed that in the readme for h.sie's Waterstream+Exhaust Combi V2.3 for GWX3, it says that it's not compatible with the GWX VIIC41 Player Sub.

So I'm wondering, how do you get waterstreams and exhaust if you're using that mod to play a VIIC/41? Or do you just do without for the duration?

The only thing I could find for waterstreams, anyway, on a VIIC/41 was Rubini's older version of the Waterstreams mod, and it refers to using other mods by Tomi to get the VIIC/41 and add the effects to it. Not sure I found all the right ones for that, if that's how I need to work it.

Any help & info greatly appreciated!

BUKER · 01-16-11, 03:05 AM

Quote:

Originally Posted by frau kaleun

Any help & info greatly appreciated!

Hi frau kaleun,

I've always said that the best submarine Tomi_099 simply no!

VIIC/41 forever!!

Screenshots:
http://img402.imageshack.us/img402/8347/67492127.jpg
http://img716.imageshack.us/img716/332/78504269.jpg

rowi58 · 01-16-11, 03:33 AM

Quote:

Originally Posted by frau kaleun

Was getting the GWX - VIIC41 Player Sub mod sorted to use via Commander only when I opt to play that particular boat, and going through the other mods I usually keep enabled in the game to make sure nothing conflicted just in case it ever got used... noticed that in the readme for h.sie's Waterstream+Exhaust Combi V2.3 for GWX3, it says that it's not compatible with the GWX VIIC41 Player Sub.

So I'm wondering, how do you get waterstreams and exhaust if you're using that mod to play a VIIC/41? Or do you just do without for the duration?

The only thing I could find for waterstreams, anyway, on a VIIC/41 was Rubini's older version of the Waterstreams mod, and it refers to using other mods by Tomi to get the VIIC/41 and add the effects to it. Not sure I found all the right ones for that, if that's how I need to work it.

Any help & info greatly appreciated!

The best thing is to play LSH3 with rubini's and Evan's "water Stream" embeded and a real exhaust fume for the Diesel-Engines.

Try it - and you'll love it. Though, it is no problem to have 3 or 4 or 5 different SH3-installations with the entire MODs

.

Greetings
rowi58

Anvart · 01-16-11, 10:19 AM

Quote:

Originally Posted by BUKER

Hi frau kaleun,

I've always said that the best submarine Tomi_099 simply no!

VIIC/41 forever!!

...

"Тихий ужас"... этот скрин...
всё в "переизбытке"... и неправильное позиционирование палубных генераторов...

frau kaleun · 01-16-11, 11:03 AM

Maybe I should've phrased the question differently.

Is there a way to get waterstreams & exhaust on the GWX VIIC41 Player Sub in GWX3?

If not, what mods are needed to play a "proper" VCII/41 in GWX3 and give it waterstreams & exhaust? The ones I have found so far are not very clear on which version of GWX they can be used with, which other mods are necessary, and how to set them all up correctly.

Volk2 · 01-16-11, 11:21 AM

Quote:

Originally Posted by frau kaleun

Is there a way to get waterstreams & exhaust on the GWX VIIC41 Player Sub in GWX3?

I'm not sure about exhaust, but I've added waterstreams to some uboat by silent 3ditor and a LOT of copy-pasting from a uboat that already had waterstreams. I think that there is no simple method to add it, you must edit the .dat file of the submarine - and it is very arduous work (but possible).

nikbear · 01-16-11, 12:49 PM

Quote:

Originally Posted by BUKER

Hi frau kaleun,

I've always said that the best submarine Tomi_099 simply no!

VIIC/41 forever!!

Screenshots:
http://img402.imageshack.us/img402/8347/67492127.jpg
http://img716.imageshack.us/img716/332/78504269.jpg

While that mod was outstanding to look at,was it ever finished??

The last I saw about it there were issues with it being seen by the enemy ships even though you were submerged

Was that solved then

nikbear · 01-16-11, 12:57 PM

Quote:

Originally Posted by frau kaleun

Maybe I should've phrased the question differently.

Is there a way to get waterstreams & exhaust on the GWX VIIC41 Player Sub in GWX3?

If not, what mods are needed to play a "proper" VCII/41 in GWX3 and give it waterstreams & exhaust? The ones I have found so far are not very clear on which version of GWX they can be used with, which other mods are necessary, and how to set them all up correctly.

I asked the same question many moons ago and didn't get much further either

If memory serves me well the VIIC/41 modelled in GWX is by a modder called Cobalt

He totally re-worked it so that other TypeVII waterstreams I assume won't work,and it would have to have its own separate mod,which no one I think has bothered to do,so far

Here's hoping someone picks up the challenge

BUKER · 01-16-11, 06:17 PM

Quote:

Originally Posted by Anvart

"Тихий ужас"... этот скрин...
всё в "переизбытке"... и неправильное позиционирование палубных генераторов...

Ты имеешь ввиду,что стоки не из тех "дырок"стекают?
Ну так,дарёному коню в зубы не смотрят!

Да,а чего по твоему мнению "в переизбытке"?
Если пены,то в штормовом море пены мало не бывает...

Кстати,вот фото я пытался под него подогнать скрин.
Правда качество изначально было плохое,пришлось малость воду подкрасить.

nikbear 2X_GWX3.0G__VIIC41__PlaySub_V21.rar
http://www.mediafire.com/?kgum4gdizo0

Schwieger · 01-17-11, 02:12 AM

Quote:

Originally Posted by nikbear

While that mod was outstanding to look at,was it ever finished??

The last I saw about it there were issues with it being seen by the enemy ships even though you were submerged

Was that solved then

Is the water in this pic stock? If not what mod is it and where might I find it?

nikbear · 01-17-11, 07:48 PM

Quote:

Originally Posted by BUKER

Ты имеешь ввиду,что стоки не из тех "дырок"стекают?
Ну так,дарёному коню в зубы не смотрят!

Да,а чего по твоему мнению "в переизбытке"?
Если пены,то в штормовом море пены мало не бывает...

Кстати,вот фото я пытался под него подогнать скрин.
Правда качество изначально было плохое,пришлось малость воду подкрасить.

nikbear 2X_GWX3.0G__VIIC41__PlaySub_V21.rar
http://www.mediafire.com/?kgum4gdizo0

Thank you,I always wanted to give this a try

nemo7 · 01-18-11, 02:45 AM

Ahoy Frau,
Try to combine the VIIC41.7z mod (http://download395.mediafire.com/ylw...0ztd/VIIC41.7z) with Rubini's RBs_ES_for_Rubinis_WS mod (http://www.subsim.com/radioroom/down...d=630&act=down)

frau kaleun · 01-18-11, 09:12 AM

Thanks, I'll check those out!

Fubar2Niner · 01-18-11, 11:37 AM

Quote:

Originally Posted by nemo7

Ahoy Frau,
Try to combine the VIIC41.7z mod (http://download395.mediafire.com/ylw...0ztd/VIIC41.7z) with Rubini's RBs_ES_for_Rubinis_WS mod (http://www.subsim.com/radioroom/down...d=630&act=down)

What is this mod of which you speak nemo ? Could you post a screenshot perchance ol' chap? Many thanks. Or maybe you might oblidge frau. Good to see the wombat back btw.

Best regards.

Fubar2Niner

nemo7 · 01-18-11, 02:11 PM

Quote:

Originally Posted by Fubar2Niner

What is this mod of which you speak nemo ? Could you post a screenshot perchance ol' chap? Many thanks. Or maybe you might oblidge frau. Good to see the wombat back btw.

Best regards.

Fubar2Niner

Ahoy matey.

This is actually a triple mod; 1. GWX3.0GOLD Water_Stream_for_Uboats_V21
2. GWX3.0GOLD VIIC41__PlaySub_V21
3. GWX3.0GOLD VIIC41_WaterSTream_V21

Cheers

01-16-11, 02:12 AM	#1
frau kaleun Rear Admiral Join Date: Nov 2009 Location: Skyri--oh who are we kidding, I'm probably at Lowe's. Again. Posts: 12,706 Downloads: 168 Uploads: 0	Waterstreams & Exhaust for GWX VIIC41 Player Sub? Was getting the GWX - VIIC41 Player Sub mod sorted to use via Commander only when I opt to play that particular boat, and going through the other mods I usually keep enabled in the game to make sure nothing conflicted just in case it ever got used... noticed that in the readme for h.sie's Waterstream+Exhaust Combi V2.3 for GWX3, it says that it's not compatible with the GWX VIIC41 Player Sub. So I'm wondering, how do you get waterstreams and exhaust if you're using that mod to play a VIIC/41? Or do you just do without for the duration? The only thing I could find for waterstreams, anyway, on a VIIC/41 was Rubini's older version of the Waterstreams mod, and it refers to using other mods by Tomi to get the VIIC/41 and add the effects to it. Not sure I found all the right ones for that, if that's how I need to work it. Any help & info greatly appreciated!

01-18-11, 02:45 AM	#12
nemo7 Weps Join Date: Dec 2009 Location: Averof's bunk Posts: 357 Downloads: 389 Uploads: 0	Ahoy Frau, Try to combine the VIIC41.7z mod (http://download395.mediafire.com/ylw...0ztd/VIIC41.7z) with Rubini's RBs_ES_for_Rubinis_WS mod (http://www.subsim.com/radioroom/down...d=630&act=down) __________________ Deep into that darkness peering, long I stood there wondering, fearing, Doubting, dreaming dreams no mortal ever dared to dream before... Last edited by nemo7; 01-18-11 at 02:55 AM.

01-16-11, 11:03 AM	#5
frau kaleun Rear Admiral Join Date: Nov 2009 Location: Skyri--oh who are we kidding, I'm probably at Lowe's. Again. Posts: 12,706 Downloads: 168 Uploads: 0	Maybe I should've phrased the question differently. Is there a way to get waterstreams & exhaust on the GWX VIIC41 Player Sub in GWX3? If not, what mods are needed to play a "proper" VCII/41 in GWX3 and give it waterstreams & exhaust? The ones I have found so far are not very clear on which version of GWX they can be used with, which other mods are necessary, and how to set them all up correctly.

01-18-11, 09:12 AM	#13
frau kaleun Rear Admiral Join Date: Nov 2009 Location: Skyri--oh who are we kidding, I'm probably at Lowe's. Again. Posts: 12,706 Downloads: 168 Uploads: 0	Thanks, I'll check those out!