GWX 3.0

JHuschke · 08-10-09, 11:07 PM

Direct link: http://i282.photobucket.com/albums/k...3/Untitled.jpg

As you can see here, there is a corrupt source file in GWX 3.0 setup. Now now, I have re-downloaded the GWX3.bin files from Jimbuna and Kpt.Lehmann's filefronts numerous times, and something is corrupt that I am not getting.

Please tell me what I need to do,

Thanks.

Jimbuna · 08-11-09, 05:43 AM

I've tested the file at my end and it shows no faults.

I can only imagine the fault is in your download.

Does the install work?

I suspect it will seeing as the fault is in a tga file

JHuschke · 08-11-09, 08:19 AM

Well, the GWX3.exe works fine, it will install halfway and then that
C:\Ubisoft\SilentHunterIII\data\NKSs_\NKSs\T05.tga cannot copy because a source file is corrupted. Its done that everytime, I've downloaded each and every .bin file seperatly (one at a time) and used no other internet other than downloading the .bin file... I wonder why they would be corrupt everytime?

Rafael · 08-11-09, 08:41 AM

It says that it is damaged (beschaedigt), so I asume your download exe file is corrupt.

Try to download the exe file again.

If that does not help, I still have all the bin files and can upload them to my own website.

I did the same for people with NYGM when it was unavailable.

JHuschke · 08-11-09, 08:54 AM

Yes, but I did not know which file. But thank you! I will try downloading it again and see what happens

maxextz · 08-11-09, 09:13 AM

i got the same but just clicked on ignore and everything seems ok

well it hasn't come back to bite me on the ass yet.

J.J · 08-11-09, 01:01 PM

Quote:

Originally Posted by Rafael

It says that it is damaged (beschaedigt), so I asume your download exe file is corrupt.

Try to download the exe file again.

If that does not help, I still have all the bin files and can upload them to my own website.

I did the same for people with NYGM when it was unavailable.

I have downloaded GWX3,all files apart from GWX3-4bin are OK but MD5 finds this file does not match Game stops installing half way through at:- data\sea\NKGN\NKGN_To1 through to 9 then NKLK\NKLK config then dat,equip sim sns
etc. I have tried to download this file from other locations on the site .same error occurs. Could you please let me have a copy of this bin file, if you still have it as I think that may be my problem.Please advise me of the address of your site should I need to download it from there Thanks John

J.J · 08-11-09, 03:07 PM

Quote:

Originally Posted by J.J

I have downloaded GWX3,all files apart from GWX3-4bin are OK but MD5 finds this file does not match Game stops installing half way through at:- data\sea\NKGN\NKGN_To1 through to 9 then NKLK\NKLK config then dat,equip sim sns
etc. I have tried to download this file from other locations on the site .same error occurs. Could you please let me have a copy of this bin file, if you still have it as I think that may be my problem.Please advise me of the address of your site should I need to download it from there Thanks John

Thanks everyone,just downloaded the bin file and game

has installed

JHuschke · 08-11-09, 08:57 PM

Quite strange..says all the MD5 sums are the same..except the GWX-4.bin, I have redownloaded it and have the continuos problem from all sources.

Jimbuna · 08-12-09, 04:01 AM

Quote:

Originally Posted by JHuschke

Quite strange..says all the MD5 sums are the same..except the GWX-4.bin, I have redownloaded it and have the continuos problem from all sources.

All I can suggest is wipe all the files out of your system, perform a thorough registry clean and download all the necessary files from one source.

I am of the humble opinion the files on my FF link are okay (the number of successful downloads cofirms that).

If you still experience difficulty it saddens me to suggest the problem must lie somewhere within your system and not the files.

I sincerely hope we can resolve this issue to your satisfaction.

If we eventually fail, it will not be because of lack of effort.

I am more than happy to send you a couple of discs (one with the exe and 7 bins, the other containing the single file install).

JHuschke · 08-12-09, 04:24 PM

Alright, I finally found out which one was corrupt and downloaded it from Jimbuna's page, the installation was successful!

I appreciate everyone's help, thank you very much and happy hunting!

Jimbuna · 08-13-09, 10:33 AM

Quote:

Originally Posted by JHuschke

Alright, I finally found out which one was corrupt and downloaded it from Jimbuna's page, the installation was successful!

I appreciate everyone's help, thank you very much and happy hunting!

Nice one

maple leaf · 09-01-09, 02:26 AM

JHuschke, the exact same thing has just happened to me. i've downloaded the 4th bin from "Kpt. Lehmann" files three times now; and ever time that particular file has been messed up (according to the md5 checker). After reading other people's problems with that file of "Kpt. Lehmann", i'm downloading it from the "Jimbuna" bunch now. Hopefully that'll solve the install prob for me. I'll report back. ***edit: the "Jimbuna" GWX3-4.bin worked.***

Whoever is in charge of the "Kpt. Lehmann" files should take a look at that particular file (GWX3-4.bin). Seems like it is causing problems for more than a few people.

Jimbuna · 09-02-09, 03:26 PM

Quote:

Originally Posted by bz2uh

Wish I'd seen this thread first, now on my third download of 3-4!!

Me too.....I could have started charging

bz2uh · 09-02-09, 03:29 PM

I shouldn't complain, it's great that you both guys allow us to keep playing!

08-10-09, 11:07 PM	#1
JHuschke XO Join Date: May 2008 Location: Munich, Germany Posts: 432 Downloads: 32 Uploads: 0	GWX 3.0 Setup Problem Direct link: http://i282.photobucket.com/albums/k...3/Untitled.jpg As you can see here, there is a corrupt source file in GWX 3.0 setup. Now now, I have re-downloaded the GWX3.bin files from Jimbuna and Kpt.Lehmann's filefronts numerous times, and something is corrupt that I am not getting. Please tell me what I need to do, Thanks. Last edited by JHuschke; 08-11-09 at 09:15 AM.

08-11-09, 05:43 AM	#2
Jimbuna Chief of the Boat Join Date: Feb 2006 Location: 250 metres below the surface Posts: 190,473 Downloads: 63 Uploads: 13	I've tested the file at my end and it shows no faults. I can only imagine the fault is in your download. Does the install work? I suspect it will seeing as the fault is in a tga file __________________ Wise men speak because they have something to say; Fools because they have to say something. Oh my God, not again!!

08-11-09, 09:13 AM	#6
maxextz Loader Join Date: Jul 2009 Location: Dublin Ireland Posts: 82 Downloads: 18 Uploads: 0	i got the same but just clicked on ignore and everything seems ok well it hasn't come back to bite me on the ass yet. __________________

09-01-09, 02:26 AM	#13
maple leaf Nub Join Date: May 2008 Posts: 3 Downloads: 1 Uploads: 0	JHuschke, the exact same thing has just happened to me. i've downloaded the 4th bin from "Kpt. Lehmann" files three times now; and ever time that particular file has been messed up (according to the md5 checker). After reading other people's problems with that file of "Kpt. Lehmann", i'm downloading it from the "Jimbuna" bunch now. Hopefully that'll solve the install prob for me. I'll report back. **edit: the "Jimbuna" GWX3-4.bin* worked.*** Whoever is in charge of the "Kpt. Lehmann" files should take a look at that particular file (GWX3-4.bin). Seems like it is causing problems for more than a few people. Last edited by maple leaf; 09-01-09 at 03:07 AM.

08-11-09, 08:19 AM	#3
JHuschke XO Join Date: May 2008 Location: Munich, Germany Posts: 432 Downloads: 32 Uploads: 0	Well, the GWX3.exe works fine, it will install halfway and then that C:\Ubisoft\SilentHunterIII\data\NKSs_\NKSs\T05.tga cannot copy because a source file is corrupted. Its done that everytime, I've downloaded each and every .bin file seperatly (one at a time) and used no other internet other than downloading the .bin file... I wonder why they would be corrupt everytime?

08-11-09, 08:41 AM	#4
Rafael Captain Join Date: Jun 2009 Location: Rotterdam - The Netherlands Posts: 514 Downloads: 22 Uploads: 7	It says that it is damaged (beschaedigt), so I asume your download exe file is corrupt. Try to download the exe file again. If that does not help, I still have all the bin files and can upload them to my own website. I did the same for people with NYGM when it was unavailable.

08-11-09, 08:54 AM	#5
JHuschke XO Join Date: May 2008 Location: Munich, Germany Posts: 432 Downloads: 32 Uploads: 0	Yes, but I did not know which file. But thank you! I will try downloading it again and see what happens

08-11-09, 08:57 PM	#9
JHuschke XO Join Date: May 2008 Location: Munich, Germany Posts: 432 Downloads: 32 Uploads: 0	Quite strange..says all the MD5 sums are the same..except the GWX-4.bin, I have redownloaded it and have the continuos problem from all sources.

08-12-09, 04:24 PM	#11
JHuschke XO Join Date: May 2008 Location: Munich, Germany Posts: 432 Downloads: 32 Uploads: 0	Alright, I finally found out which one was corrupt and downloaded it from Jimbuna's page, the installation was successful! I appreciate everyone's help, thank you very much and happy hunting!

09-02-09, 03:29 PM	#15
bz2uh Bilge Rat Join Date: Oct 2006 Posts: 1 Downloads: 4 Uploads: 0	I shouldn't complain, it's great that you both guys allow us to keep playing!