Widescreen Support

Canis · 12-29-08, 03:47 PM

Hello everybody.

I've recently reinstalled Silent Hunter 3, first time in a very long time, and right away started reinstalling some of the old mods. I see that GWX is up to 3.0 now, impressive.

Anyways, I have a 16:10 1440*900 screen. I've done my research of course and found out about the DX9RES10.DLL file that will allow you to customize the resolution of the game, only problem is, while it did work once it doesn't seem to work for me anymore. I don't understand it, especially since it worked only a couple of hours ago.

I've installed the Toolkit that's been recommended and went through all the steps mentioned here:

http://alexbret.perso.cegetel.net/in...lay_Resolution

The game still crashes at start up, right after the GWX intro with the popup pointing towards the dll file as the cause. I'm really at a loss here. Maybe one of you kind gentlemen would either know another way I can change the resolution ( I was planning on using 1200 * 900, a native 4:3 res for my monitor) or maybe know what's going on here and can point me in the right direction?

I'd be much obliged.

Brag · 12-29-08, 04:04 PM

Welcome aboard, Canis!

I'm sure some of our more masterful mates will pop up to help.

TarJak · 12-29-08, 05:46 PM

Wilkommen zum Subsin Herr Kaleun!

To get the res fix to work you need to match the resolution you set in the config file to the res of your desktop. Mismatched resolutions will result in CTD's in my experience.

Canis · 12-29-08, 06:33 PM

Quote:

Originally Posted by TarJak

Wilkommen zum Subsin Herr Kaleun!

To get the res fix to work you need to match the resolution you set in the config file to the res of your desktop. Mismatched resolutions will result in CTD's in my experience.

Ahh, I see. Yes, after reverting the cfg settings to the desktop resolution everything works again. Thank you so much! Shame though, I'd rather play it streched out to fit the screen if it means I can keep the aspect ratio... unless... hmm...

I think I remember reading something about a program that let one set custom desktop resolutions. I think I'll check up on that now. Worth a shot to get a native 4:3 resolution running

UberTorpedo · 12-30-08, 08:35 PM

Did some searching and found some links for you that might work out for you. :hmm:

http://www.subsim.com/radioroom/show...=Windowed+mode

http://www.subsim.com/radioroom/show...=Windowed+mode

http://hosted.filefront.com/DanFraser

cheers

prowler3 · 01-01-09, 05:13 PM

I've just completed, and put to use, a long search of ways to get my 4:3 aspect games to play without the stretching, on a widescreen LCD. I don't mind the "pillar box", the black bars on the sides. The answer was (for me) the nVidia Control Panel. I've created a seperate Hardware Profile, named "Gaming43". Now, when I boot, I have a choice of using "Profile1" (the default with a 16:10 aspect) or Gaming43. For those with nVidia, here's the steps:

1> Set your resolution to your monitors NATIVE RESOLUTION (In my case, 1920X1200 @ 60Hz). Look at
your monitor's specs for what yours is.
2> Open up NVidia Control Panel.
3> Turn on ADVANCED SETTINGS (If not done already)
4> Click on "Change Flat Panel Scaling" and select "Use NVIDIA scaling with fixed-aspect ratio".
Click Apply.
5> Click on "Manage Custom Resolutions". Click on "Create".
6> Click on "Advanced>>"
7> Change the drop down box for "Timing Standard" to manual. *It is important to do this *BEFORE*
changing the resolution settings.
8> At the top next to "Horizontal desktop pixels", "Vertical desktop lines", and "GDI Refresh rate"
insert whatever values you need.
EXAMPLE: In my SHIII game which runs at 1600X1200 @ 60Hz I had to insert Hdp:1600 Vdl:1200 and
GDIRr:60
9> Click Test
10> Repeat steps 5-9 for each resolution setting you plan on using.

To use these resolutions you now have them available in the NVidia CP under "Display/change resolution" in the left side menu, using the slider. Note that on my machine, before doing this, selecting 1600x1200 resulted in weird stretching and not a true 4:3 desktop...that is now gone. I use this for FS9 also. I could not get FS9 to stay at 4:3 in Windowed Mode, before this change...now all my 4:3 games are perfect!

Fincuan · 01-01-09, 07:19 PM

Yep that's how it's supposed to go, but unfortunately it ain't so for some Ati users. For some it works as it should, and for some it doesn't work at all, and even Ati themselves don't seem to know why. That's where programs like D3DWindower come into play.

UberTorpedo · 01-02-09, 12:54 AM

Oops

. Left out a link from my post above http://www.subsim.com/radioroom/showthread.php?t=139103

cheers

12-29-08, 03:47 PM	#1
Canis Nub Join Date: Dec 2008 Posts: 2 Downloads: 0 Uploads: 0	Widescreen Support Hello everybody. I've recently reinstalled Silent Hunter 3, first time in a very long time, and right away started reinstalling some of the old mods. I see that GWX is up to 3.0 now, impressive. Anyways, I have a 16:10 1440900 screen. I've done my research of course and found out about the DX9RES10.DLL file that will allow you to customize the resolution of the game, only problem is, while it did work once it doesn't seem to work for me anymore. I don't understand it, especially since it worked only a couple of hours ago. I've installed the Toolkit that's been recommended and went through all the steps mentioned here: http://alexbret.perso.cegetel.net/in...lay_Resolution The game still crashes at start up, right after the GWX intro with the popup pointing towards the dll file as the cause. I'm really at a loss here. Maybe one of you kind gentlemen would either know another way I can change the resolution ( I was planning on using 1200 900, a native 4:3 res for my monitor) or maybe know what's going on here and can point me in the right direction? I'd be much obliged.

12-29-08, 04:04 PM	#2
Brag Navy Seal Join Date: Nov 2006 Location: Docked on a Russian pond Posts: 7,072 Downloads: 2 Uploads: 0	Welcome aboard, Canis! I'm sure some of our more masterful mates will pop up to help. __________________ Espionage, adventure, suspense, are just a click away Click here to look inside Brag's book: Amazon.com: Kingmaker: Alexey Braguine: Books Order Kingmaker here: http://www.subsim.com/store.html For Tactics visit:http://www.freewebs.com/kielman/

12-29-08, 05:46 PM	#3
TarJak Fleet Admiral Join Date: Jul 2006 Location: Sydney, Australia Posts: 17,052 Downloads: 150 Uploads: 8	Wilkommen zum Subsin Herr Kaleun! To get the res fix to work you need to match the resolution you set in the config file to the res of your desktop. Mismatched resolutions will result in CTD's in my experience. Last edited by TarJak; 12-29-08 at 05:47 PM.

12-30-08, 08:35 PM	#5
UberTorpedo Planesman Join Date: Jun 2006 Location: Southern California Posts: 194 Downloads: 78 Uploads: 0	Did some searching and found some links for you that might work out for you. :hmm: http://www.subsim.com/radioroom/show...=Windowed+mode http://www.subsim.com/radioroom/show...=Windowed+mode http://hosted.filefront.com/DanFraser cheers __________________ Download Link for Mods and Other Goodies...

01-01-09, 05:13 PM	#6
prowler3 XO Join Date: Mar 2007 Location: Colorado, for now. Any RED State, ASAP. Posts: 401 Downloads: 77 Uploads: 0	I've just completed, and put to use, a long search of ways to get my 4:3 aspect games to play without the stretching, on a widescreen LCD. I don't mind the "pillar box", the black bars on the sides. The answer was (for me) the nVidia Control Panel. I've created a seperate Hardware Profile, named "Gaming43". Now, when I boot, I have a choice of using "Profile1" (the default with a 16:10 aspect) or Gaming43. For those with nVidia, here's the steps: 1> Set your resolution to your monitors NATIVE RESOLUTION (In my case, 1920X1200 @ 60Hz). Look at your monitor's specs for what yours is. 2> Open up NVidia Control Panel. 3> Turn on ADVANCED SETTINGS (If not done already) 4> Click on "Change Flat Panel Scaling" and select "Use NVIDIA scaling with fixed-aspect ratio". Click Apply. 5> Click on "Manage Custom Resolutions". Click on "Create". 6> Click on "Advanced>>" 7> Change the drop down box for "Timing Standard" to manual. It is important to do this BEFORE* changing the resolution settings. 8> At the top next to "Horizontal desktop pixels", "Vertical desktop lines", and "GDI Refresh rate" insert whatever values you need. EXAMPLE: In my SHIII game which runs at 1600X1200 @ 60Hz I had to insert Hdp:1600 Vdl:1200 and GDIRr:60 9> Click Test 10> Repeat steps 5-9 for each resolution setting you plan on using. To use these resolutions you now have them available in the NVidia CP under "Display/change resolution" in the left side menu, using the slider. Note that on my machine, before doing this, selecting 1600x1200 resulted in weird stretching and not a true 4:3 desktop...that is now gone. I use this for FS9 also. I could not get FS9 to stay at 4:3 in Windowed Mode, before this change...now all my 4:3 games are perfect! Last edited by prowler3; 01-01-09 at 05:18 PM.

01-01-09, 07:19 PM	#7
Fincuan Admiral Join Date: Aug 2007 Location: Suomi, sauna, puukko, perkele Posts: 2,346 Downloads: 39 Uploads: 0	Yep that's how it's supposed to go, but unfortunately it ain't so for some Ati users. For some it works as it should, and for some it doesn't work at all, and even Ati themselves don't seem to know why. That's where programs like D3DWindower come into play. Last edited by Fincuan; 01-01-09 at 07:28 PM.

01-02-09, 12:54 AM	#8
UberTorpedo Planesman Join Date: Jun 2006 Location: Southern California Posts: 194 Downloads: 78 Uploads: 0	Oops . Left out a link from my post above http://www.subsim.com/radioroom/showthread.php?t=139103 cheers __________________ Download Link for Mods and Other Goodies...