how to make your gui compatible with Flakmonkey & DD's mod

makman94 · 03-01-10, 04:57 AM

how to make your gui compatible with Flakmonkey & DD's mod
-----------------------------------------------------------

two files need adjustments ,the commands ( data/cfg) and the cameras.dat (data/library)

copy and paste at your desktop the commands and the cameras.dat of the gui you are using.
rename the cameras.dat to something else ,for example to ''cameras-take values''

for the commands:
------------------
search in the manual of FM&DD's mod and you will find there all the changes-entries that you must apply to your commands.import these changes-entries to yous commands and save

for the cameras.dat
-------------------

1.copy and paste at your desktop the cameras.dat of FM&DD's mod
2.open with s3d the ''cameras-take values'' and the cameras.dat
3.copy one by one ...EACH AND EVERY VALUE that you see at ''Dummy_Cam_UZO'' ,''Dummy_Cam_Obs_Periscope'' , ''Dummy_Cam_Periscope'' , ''Dummy_Cam_Binocular'' from the ''cameras-take values'' to the cameras.dat of FM&DD's mod . save the changes

create now a jsgme mod for these two files and enable it LAST in the mods enabled list.

Thats it ! you finished !

Magic1111 · 03-01-10, 01:15 PM

Thank you makman for the great explanation!

Best regards,
Magic

ReallyDedPoet · 03-01-10, 01:24 PM

Nice

SeaWolf U-57 · 03-01-10, 02:49 PM

Quote:

Originally Posted by reallydedpoet

Nice

Wow I never expected to see you signature pic change after a certain win NOT MUCH

comet61 · 03-01-10, 04:29 PM

Makman-

I have done the editing on both files and made a separate folder to load into JGSME, however, I just realized that I need the OLC fix that came with the FM mod. So, via JGSME I load the FM mod, then the OLC fix then the new edited files last...so this ought to work per your instructions? Am I understanding that correctly? Thanks in advance.

UPDATE: OK...the edits all work except 2 things (minor perhaps): I have no volume control on the hydrophones and the shift-e key to the engine room does not work. See below. Earlier, before the edits, the hydrophones were off by 20°, now they are good. The new animations and click spots are working OK. I'm pretty sure the hydro volume is controlled in the sound files? On another note, using OLC fix with the new Camera.dat edits, both scopes, binoculars and UZO all work fine. Crosshairs are aligned, magnification settings are good too.

I copied and pasted the Cmd line from the FM mod cfg file to the edited one I made per Makmans instructions. It works now. This will enable you to go to the engine room by pressing shift+e.
[Cmd11]
Name=Interior_aft_camera
Ctxt=1
Key0=0x45,Cs,"Shift+E"
Page=0x33000000,3704
GoBack=Interior_fore_camera

Assprella · 03-02-10, 06:43 AM

Thank you Makman.

makman94 · 03-02-10, 10:16 AM

Quote:

Originally Posted by comet61

Makman-

I have done the editing on both files and made a separate folder to load into JGSME, however, I just realized that I need the OLC fix that came with the FM mod. So, via JGSME I load the FM mod, then the OLC fix then the new edited files last...so this ought to work per your instructions? Am I understanding that correctly? Thanks in advance.

UPDATE: OK...the edits all work except 2 things (minor perhaps): I have no volume control on the hydrophones and the shift-e key to the engine room does not work. See below. Earlier, before the edits, the hydrophones were off by 20°, now they are good. The new animations and click spots are working OK. I'm pretty sure the hydro volume is controlled in the sound files? On another note, using OLC fix with the new Camera.dat edits, both scopes, binoculars and UZO all work fine. Crosshairs are aligned, magnification settings are good too.

I copied and pasted the Cmd line from the FM mod cfg file to the edited one I made per Makmans instructions. It works now. This will enable you to go to the engine room by pressing shift+e.
[Cmd11]
Name=Interior_aft_camera
Ctxt=1
Key0=0x45,Cs,"Shift+E"
Page=0x33000000,3704
GoBack=Interior_fore_camera

hi Comet,

this post is for those who are NOT using the Magui or the Olc's gui

if you use the MaGui you will find the 'fix' you need in its .rar
if you use Olc's gui you will find the 'fix' you need in the .rar of FM_NI
read very carefully what mods and the order of them in order to have a proper installation

ps: in any case you don't need all the 'fixes' ! you need ONLY ONE ...just the one that matches with the gui you are using

bye

vergol · 03-02-10, 01:07 PM

What if you're using something like ACM Reloaded (which is installed on top of OLC) ?

LiveGoat · 03-02-10, 02:07 PM

Quote:

Originally Posted by vergol

What if you're using something like ACM Reloaded (which is installed on top of OLC) ?

I threw the relevant ACM reloaded files into ACM1.1.0 and then followed the steps that Mak described and then enabled in this order

FM Interior
ACM gui
FM OLC Fic

Worked like a charm.

03-01-10, 04:57 AM	#1
makman94 Hellas Join Date: Jul 2008 Posts: 2,325 Downloads: 182 Uploads: 7	how to make your gui compatible with Flakmonkey & DD's mod how to make your gui compatible with Flakmonkey & DD's mod ----------------------------------------------------------- two files need adjustments ,the commands ( data/cfg) and the cameras.dat (data/library) copy and paste at your desktop the commands and the cameras.dat of the gui you are using. rename the cameras.dat to something else ,for example to ''cameras-take values'' for the commands: ------------------ search in the manual of FM&DD's mod and you will find there all the changes-entries that you must apply to your commands.import these changes-entries to yous commands and save for the cameras.dat ------------------- 1.copy and paste at your desktop the cameras.dat of FM&DD's mod 2.open with s3d the ''cameras-take values'' and the cameras.dat 3.copy one by one ...EACH AND EVERY VALUE that you see at ''Dummy_Cam_UZO'' ,''Dummy_Cam_Obs_Periscope'' , ''Dummy_Cam_Periscope'' , ''Dummy_Cam_Binocular'' from the ''cameras-take values'' to the cameras.dat of FM&DD's mod . save the changes create now a jsgme mod for these two files and enable it LAST in the mods enabled list. Thats it ! you finished ! __________________ Knowledge is the only thing that nobody can ever take from you... Mediafire page:http://www.mediafire.com/folder/da50.../Makman94_Mods

03-01-10, 01:15 PM	#2
Magic1111 Silent Hunter Join Date: Sep 2008 Location: Germany - Sailing on U-552 in North Atlantic Posts: 4,429 Downloads: 783 Uploads: 0	Thank you makman for the great explanation! Best regards, Magic __________________

03-01-10, 01:24 PM	#3
ReallyDedPoet Canadian Wolf Join Date: Jul 2006 Location: Canada. The one and only, East Coast Posts: 10,886 Downloads: 946 Uploads: 5	Nice __________________ Back in the Day

03-01-10, 04:29 PM	#5
comet61 Sparky Join Date: Oct 2009 Posts: 151 Downloads: 240 Uploads: 0	conversions Makman- I have done the editing on both files and made a separate folder to load into JGSME, however, I just realized that I need the OLC fix that came with the FM mod. So, via JGSME I load the FM mod, then the OLC fix then the new edited files last...so this ought to work per your instructions? Am I understanding that correctly? Thanks in advance. UPDATE: OK...the edits all work except 2 things (minor perhaps): I have no volume control on the hydrophones and the shift-e key to the engine room does not work. See below. Earlier, before the edits, the hydrophones were off by 20°, now they are good. The new animations and click spots are working OK. I'm pretty sure the hydro volume is controlled in the sound files? On another note, using OLC fix with the new Camera.dat edits, both scopes, binoculars and UZO all work fine. Crosshairs are aligned, magnification settings are good too. I copied and pasted the Cmd line from the FM mod cfg file to the edited one I made per Makmans instructions. It works now. This will enable you to go to the engine room by pressing shift+e. [Cmd11] Name=Interior_aft_camera Ctxt=1 Key0=0x45,Cs,"Shift+E" Page=0x33000000,3704 GoBack=Interior_fore_camera Last edited by comet61; 03-01-10 at 04:55 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-02-10, 06:43 AM	#6
Assprella Watch Join Date: Sep 2009 Posts: 30 Downloads: 49 Uploads: 0	Thank you Makman.

03-02-10, 01:07 PM	#8
vergol Machinist's Mate Join Date: Jul 2009 Posts: 121 Downloads: 29 Uploads: 0	What if you're using something like ACM Reloaded (which is installed on top of OLC) ?