![]() |
SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997 |
![]() |
#1 |
Sonar Guy
![]() Join Date: Dec 2007
Posts: 376
Downloads: 187
Uploads: 21
|
![]()
First for VIIC.
NSS_Uboat7c.cfg file. [Properties] PeriscopeDepth=8.5;meters ; Electric engines, crew on deck ![]() SnorkelDepth=7.4;meters ; Diesel engines /Normal decks awash. ![]() CrashDepth=70;meters MaxDepth=300;meters SurfaceDepth=9;meters ; Crew off deck. ![]() TorpLaunchMaxDepth=20;meters StormConditions=7,0.1;max wind speed [m/s], max rain This was tested in 5 meter wind. VIIC is on SURFACE, low speed, and you press ";" Snorkel-key, You have , decks awash/diesel engines/crew on deck . Press "p" Periscope key and VIIC will go wery low on water, electric engines, crew on deck. VIIC is in PeriscopeDepth= 12m, low speed=3knots, silent running =on. You want to go /on surface/electric engines/Crew on deck. First reduce engineroom crew to minimum = if you take off one more crew member,engines will stop. Also make sure that there is no crew in dieselroom. You do NOT want to start diesels/make noise. Press "p" Periscope key and VIIC will go up, wery low on water, electric engines, BUT NO CREW ON DECK:rotfl: What to do :hmm: Make more speed = 4 knots. Press ";" Snorkel-key, and as soon as crew will go on deck, press Periscope key. NOT all electric engineroom crew will go to dieselroom, and there should be a message "Not enough crew in diesel". Put "WO" on deck, reduce speed to 3 knots, put engineroom crew back to electric engines, and wait. If there is enough speed U-boat should glide down to "p" = 8.5m depth, and electric engines should start. Next IXB : [Properties] PeriscopeDepth=8.9;meters ![]() SnorkelDepth=7.6;meters ![]() CrashDepth=70;meters MaxDepth=300;meters SurfaceDepth=9.5;meters ![]() TorpLaunchMaxDepth=20;meters Same as VIIC but no need to go for 4knots as IXB has more mass and glides better. No electric engines on surface ?? :rotfl: :rotfl: Use as you like. No mod to download as you can edit files easily by hand. ![]()
__________________
SH ![]() |
![]() |
![]() |
![]() |
#2 |
Lieutenant
![]() Join Date: May 2007
Location: pireas
Posts: 256
Downloads: 481
Uploads: 0
|
![]()
I will try now!!thanks
![]() ![]() |
![]() |
![]() |
![]() |
#3 |
Sonar Guy
![]() Join Date: Dec 2007
Posts: 376
Downloads: 187
Uploads: 21
|
![]()
Hello
I did some testing for GWX2.0 and found out that you need 4knots for IXB to go from 12m deep to 8.9m(on surface/electric engines/crew on deck) via 7.6 (decks awash) to get crew on deck,and not use diesels. and that it did not work for VIIC. But i am happy that IXB is ok with GWX2.0. Maybe GWX devs can do something for VIIC. ![]() So at this point i recommend IXB for GWX2. ![]() ![]()
__________________
SH ![]() |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|