Crash Dive Not Stopping?

Makr · 04-21-07, 09:28 AM

Im using GWX 1.03 and Ive had to crash dive a few times the past couple missions. However, my boat doesn't want to stop diving....I set a new depth, but the thing keeps diving, until it hits like 250, I start getting nervous and blow ballast....am I missing something or is this a possible bug??

Thanks!

Foghladh_mhara · 04-21-07, 09:41 AM

Only thing I know of is if you press D for dive you keep going down whereas C brings you to a controlled depth. That prob doesn't help you though if your boat keeps going down after you specify a depth :hmm:

GT182 · 04-21-07, 09:56 AM

Or use the A key to stop your desent and hold at that level.

Brag · 04-21-07, 10:59 AM

I don't think it's a bug. Though still on my first 1.03 patrol, made a couple of crash dives and stopped them normally with A key.

danlisa · 04-21-07, 11:01 AM

Are you using SH3 Commander? There a simulated malfunctions that will cause your crash depth to vary, sometime by a little & others by a lot.

Makr · 04-21-07, 02:08 PM

Yeah, I'm using Commander.

Haven't tried using the A key......in the past my crash dives stopped, or at least I think they did. Next time I'll try the A key. Thanks for the responses.

GoldenRivet · 04-21-07, 03:35 PM

if you are using SH3 commander with malfunctions and sabotage option checked there are a couple of things with crash dive you will notice

1. The crash dive wont happen when you order it because the "Ahead Flank" function has been sabotaged and you cannot make full engine power.

2. Your dive planes will "Jam" in the crash dive plummeting you beyond crush depth to your death.

3. i have heard of some people saying that the AA guns and Deck Guns wont fire sometimes but i have not run into this yet.

On every patrol when you are in deep water at the earliest possible point in your patrol. test fire the AA guns and Deck gun, order ahead flank, and order a crash dive. If everything works like it is supposed to then you are ok.

the only way to stop the uncontrolled crash dive is to select a new depth.

or you can just turn malfunctions OFF in SH3 commander

Makr · 04-22-07, 08:38 AM

Quote:

Originally Posted by GoldenRivet

the only way to stop the uncontrolled crash dive is to select a new depth.

or you can just turn malfunctions OFF in SH3 commander

That's my problem....when I select a new depth, the dive doesn't stop, the only way is for me to blow ballast, which really sucks when a dd is above me.

I don't think I turned malfunctions ON in Commander...can double check though. Thanks.

ReallyDedPoet · 04-22-07, 08:40 AM

When I start out a patrol there are 2 main things I check, flank speed and Crash Dive, when I am in an appropriate depth.

RDP

Jimbuna · 04-22-07, 12:53 PM

You can also check the cfg file in : C:\Program Files\Ubisoft\GWXv103\data\Submarine\NSS_Uboat9b4. ....the crash depth should read 70 metres

04-21-07, 09:28 AM	#1
Makr Sailor man Join Date: Dec 2006 Location: In a van down by the river. Posts: 50 Downloads: 0 Uploads: 0	Crash Dive Not Stopping? Im using GWX 1.03 and Ive had to crash dive a few times the past couple missions. However, my boat doesn't want to stop diving....I set a new depth, but the thing keeps diving, until it hits like 250, I start getting nervous and blow ballast....am I missing something or is this a possible bug?? Thanks!

04-21-07, 09:41 AM	#2
Foghladh_mhara Commander Join Date: Jan 2007 Location: Kent Posts: 473 Downloads: 1 Uploads: 0	Only thing I know of is if you press D for dive you keep going down whereas C brings you to a controlled depth. That prob doesn't help you though if your boat keeps going down after you specify a depth :hmm: __________________ The beauty of not planning is that failure comes as a complete surprise without any of the stress that might normally precede such a venture

04-21-07, 09:56 AM	#3
GT182 Ocean Warrior Join Date: May 2005 Location: New Castle of Delaware Posts: 3,231 Downloads: 658 Uploads: 0	Or use the A key to stop your desent and hold at that level. __________________ Gary No Borders, No Language, No Culture =s No Country I'm a Deplorable, and proud of it.

04-21-07, 10:59 AM	#4
Brag Navy Seal Join Date: Nov 2006 Location: Docked on a Russian pond Posts: 7,072 Downloads: 2 Uploads: 0	I don't think it's a bug. Though still on my first 1.03 patrol, made a couple of crash dives and stopped them normally with A key. __________________ Espionage, adventure, suspense, are just a click away Click here to look inside Brag's book: Amazon.com: Kingmaker: Alexey Braguine: Books Order Kingmaker here: http://www.subsim.com/store.html For Tactics visit:http://www.freewebs.com/kielman/

04-21-07, 11:01 AM	#5
danlisa Navy Seal Join Date: Oct 2005 Location: Cornwall, UK Posts: 5,499 Downloads: 45 Uploads: 1	Are you using SH3 Commander? There a simulated malfunctions that will cause your crash depth to vary, sometime by a little & others by a lot. __________________

04-21-07, 02:08 PM	#6
Makr Sailor man Join Date: Dec 2006 Location: In a van down by the river. Posts: 50 Downloads: 0 Uploads: 0	Yeah, I'm using Commander. Haven't tried using the A key......in the past my crash dives stopped, or at least I think they did. Next time I'll try the A key. Thanks for the responses.

04-21-07, 03:35 PM	#7
GoldenRivet Subsim Aviator Join Date: Mar 2007 Location: Texas Posts: 8,726 Downloads: 146 Uploads: 0	if you are using SH3 commander with malfunctions and sabotage option checked there are a couple of things with crash dive you will notice 1. The crash dive wont happen when you order it because the "Ahead Flank" function has been sabotaged and you cannot make full engine power. 2. Your dive planes will "Jam" in the crash dive plummeting you beyond crush depth to your death. 3. i have heard of some people saying that the AA guns and Deck Guns wont fire sometimes but i have not run into this yet. On every patrol when you are in deep water at the earliest possible point in your patrol. test fire the AA guns and Deck gun, order ahead flank, and order a crash dive. If everything works like it is supposed to then you are ok. the only way to stop the uncontrolled crash dive is to select a new depth. or you can just turn malfunctions OFF in SH3 commander

04-22-07, 08:40 AM	#9
ReallyDedPoet Canadian Wolf Join Date: Jul 2006 Location: Canada. The one and only, East Coast Posts: 10,885 Downloads: 946 Uploads: 5	When I start out a patrol there are 2 main things I check, flank speed and Crash Dive, when I am in an appropriate depth. RDP __________________ Back in the Day

04-22-07, 12:53 PM	#10
Jimbuna Chief of the Boat Join Date: Feb 2006 Location: 250 metres below the surface Posts: 190,500 Downloads: 63 Uploads: 13	You can also check the cfg file in : C:\Program Files\Ubisoft\GWXv103\data\Submarine\NSS_Uboat9b4. ....the crash depth should read 70 metres __________________ Wise men speak because they have something to say; Fools because they have to say something. Oh my God, not again!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode