Which mod for an old beast ?

[matxer]

My PC is more than 4 years old: AMD Athlon 2700 (2.1 GHz), Radeon 9800 Pro, 1 Gb RAM, Windows XP.

I have read GWX is too heavy for old PCs.

What about RUB 1.45 and WAC Light 2.1 ?

[danlisa]

GWX should run on your system.:yep: You might have to do without the harbour traffic and turn down some AA/AF settings. Also, if you are happy doing it, then increase your virtual memory. (i.e virtual RAM) It's your CPU pulling your system down. Make sure there are minimal programs running in the background. Programs like Enditall or FSAutostart will stop & restart these programs for you.

EDIT - What is your performance like with stock SH3? FPS?

[Woof1701]

I'm running on an Athlon 3000+ @2,1 GHZ, 1 GB Ram, and a NVidia 6600GT 128 MB with full harbor traffic and it's running pretty stable even in harbors. I seldom have events where the FPS drops to below 15, but it's rare and only in harbors.
Check out www.guru3d.com (http://www.guru3d.com) forums for the best driver for your card. At least with NVidia cards, the newest driver is rarely the best driver for your card. Currently I'm using a driver that's almost two years old, but it works best with my card.

Important: Tune down Anti Aliasing (AA) and turn off V-sync. Those are the frame rate killers. In case you're still not happy try using the low harbor traffic option and I bet you'll be ok.

[P_Funk]

I have an Intel 2.4 Ghz, ATI x1600 256mb, with 512 RAM.

I can run GWX with the 16km mod, the normal harbour traffic, and with modest AA and AF. I get really good frames. Like 20 or more. I have a page file thats 2.5 gigs and SH3 uses about 1.5 - 1.6 gigs when its running. I have no issues, only slightly slow TC around a harbour.

You can definitely run it better than me.:up:

[matxer]

What worries me is that I have some slowdown using the stock game (v1.4bv) at TC 1024.

[vasmann]

My PC is more than 4 years old: AMD Athlon 2700 (2.1 GHz), Radeon 9800 Pro, 1 Gb RAM, Windows XP.

I have read GWX is too heavy for old PCs.

What about RUB 1.45 and WAC Light 2.1 ?

Well, I have Athlon XP 2200+ (1.8GHz), Radeon 9600XT, 768Mb
And I don't have any problems with GWX (except one - mission loads almost 6 minutes, but it worth of it)

[danlisa]

What worries me is that I have some slowdown using the stock game (v1.4bv) at TC 1024.

This is to be expected as the game is 'tracking' all shipping & aircraft within a certain radius of your position.

I have a P4 3.2 Ghz + 4GB Ram + x800 pro Ati GFX card & I still get slowdowns at 1024.:yep: At 1024 in the Nav Map my FPS will be around 60-80, dropping when close to ships.

There is also a nasty 'giveaway' regardless of your system at TC. When you are nearing a convoy/ship the game will pause to load the convoy or ship. Can't be helped, unless you patrol at 1 x TC.

[danurve]

matxer; you didn't mention what video card you have. My guess is at least an AGP 128?
I have WAC Full running on a 3200 with 1gig ram although the system realy, realy wants 2 gigs, and a 256 AGP, runs fine except for maybe trying to pan around in home port while leaving the harbour.
Whatever you do, forget about using the [.] camera view .. POW.

You can try WAC light if you want first, JSGME makes it a snap to switch out.

You can try NYGM as well. If by chance you or your system does not take a liking to either, you can try an older yet real good mod called Harbour_traffic_147 standalone.

[matxer]

danurve, yes, I wrote my video card is a 9800 pro. I'll add it's a 128 mb.

[Jimbuna]

You should still be ok....my lad has similar specs to yours but a slightly slower cpu (Athlon 2400) and he plays GWX :arrgh!: