[REL] War Ace Campaign (WAC) 5.0 2017

gap · 10-03-17, 12:55 PM

Quote:

Originally Posted by Niume

what does mean pseudodock

Refitting the boat at sea probably

Fubar2Niner · 10-03-17, 01:49 PM

Hi Hans
Just a quick update on my findings so far. SH3 Front End seems to work fine until I try using Hsie V16B1 patch. If I enable the patch I get a CTD on loading. without the patch all is fine.

A question if I may.... In Hsies.pdf he refers to a supplement to his patch. I notice that the supplement that you have provided is different to Hsies and also is labeled "WAC5.0 H.sie Supplement to V16B1_Atlantic_Baltic_Campaign"

Does this mean the supplement is not compatible with the Med campaign ?

SH3C works fine, I use an extra JSGME install for commander alone and am able to swap in and out the necessary files for both GWX and WAC. I find this works well.

Any advice with regard to the Hsie patch would be most welcome. Also is Hsie wolf pack instructions applicable to your new supplement ?

Many thanks and kind regards.

Fubar2Niner

Niume · 10-03-17, 01:55 PM

Quote:

Originally Posted by gap

Refitting the boat at sea probably

oh so like in sh 4 you can refit instead of docking?

gap · 10-03-17, 02:06 PM

Quote:

Originally Posted by Niume

oh so like in sh 4 you can refit instead of docking?

I think so, but let's wait for a clarification by arnauld or by Hans

ericlea · 10-03-17, 04:25 PM

h.sie option : U-tanker. you can only pseudo-dock at U-tankers + surface tankers (with arnauld mod)

U-Tanker Mod (by Stiebler and h.sie)
Everyone complains that, when you dock at a U-tanker in mid-ocean, you lose all your
current renown/tonnage for medal purposes, you get a full refuelling, full repairs, full torpedo
load-out and you lose the patrol grid which BdU ordered. And then you start again from the
tanker a month after you docked! (unless using SH3Patrol or SH3Commander). No longer!
Now you 'pseudo-dock' at the U-tanker. When you are close enough, you press ESCAPE,
then 'Exit Patrol', just as if you were planning to dock. However... when you are asked
'Continue mission' or 'Dock at U-463' (for example), you click on 'Continue Mission'!!!
*Now* you get 1-4 air torpedoes (loaded only into the first 4 slots of the fore internal
reserve - so make sure there is space enough!), you retain the patrol grid details, you
receive some repairs to your hull-integrity (but not to equipment) and you receive a fuel
upgrade, of up to 30% of the full capacity. Unlike conventional docking at a base, pseudodocking
is only possible if there is no 'heavy fog' and windspeed must be 10 m/s or less. After
having (pseudo-)docked at an U-Tanker, you can (pseudo-)dock again after 2 weeks. Also,
you can only pseudo-dock at U-tankers, not at surface tankers (e.g. Brake), nor at land bases.
You can still choose to dock in the old way, if you wish. If you want this mod to also work
with surface tankers, these must be renamed e.g. from "Brake" into "U-Brake" in the
campaign files.

10-03-17, 01:49 PM	#2
Fubar2Niner Silent Hunter Join Date: Nov 2002 Location: London. UK Posts: 4,139 Downloads: 275 Uploads: 0	Front End quick feed back Hi Hans Just a quick update on my findings so far. SH3 Front End seems to work fine until I try using Hsie V16B1 patch. If I enable the patch I get a CTD on loading. without the patch all is fine. A question if I may.... In Hsies.pdf he refers to a supplement to his patch. I notice that the supplement that you have provided is different to Hsies and also is labeled "WAC5.0 H.sie Supplement to V16B1_Atlantic_Baltic_Campaign" Does this mean the supplement is not compatible with the Med campaign ? SH3C works fine, I use an extra JSGME install for commander alone and am able to swap in and out the necessary files for both GWX and WAC. I find this works well. Any advice with regard to the Hsie patch would be most welcome. Also is Hsie wolf pack instructions applicable to your new supplement ? Many thanks and kind regards. Fubar2Niner Last edited by Fubar2Niner; 10-03-17 at 01:57 PM. Reason: more questions

10-03-17, 04:25 PM	#5
ericlea Samurai Navy Join Date: Jan 2014 Location: Strasbourg F Posts: 572 Downloads: 109 Uploads: 0	h.sie option : U-tanker. you can only pseudo-dock at U-tankers + surface tankers (with arnauld mod) U-Tanker Mod (by Stiebler and h.sie) Everyone complains that, when you dock at a U-tanker in mid-ocean, you lose all your current renown/tonnage for medal purposes, you get a full refuelling, full repairs, full torpedo load-out and you lose the patrol grid which BdU ordered. And then you start again from the tanker a month after you docked! (unless using SH3Patrol or SH3Commander). No longer! Now you 'pseudo-dock' at the U-tanker. When you are close enough, you press ESCAPE, then 'Exit Patrol', just as if you were planning to dock. However... when you are asked 'Continue mission' or 'Dock at U-463' (for example), you click on 'Continue Mission'!!! Now you get 1-4 air torpedoes (loaded only into the first 4 slots of the fore internal reserve - so make sure there is space enough!), you retain the patrol grid details, you receive some repairs to your hull-integrity (but not to equipment) and you receive a fuel upgrade, of up to 30% of the full capacity. Unlike conventional docking at a base, pseudodocking is only possible if there is no 'heavy fog' and windspeed must be 10 m/s or less. After having (pseudo-)docked at an U-Tanker, you can (pseudo-)dock again after 2 weeks. Also, you can only pseudo-dock at U-tankers, not at surface tankers (e.g. Brake), nor at land bases. You can still choose to dock in the old way, if you wish. If you want this mod to also work with surface tankers, these must be renamed e.g. from "Brake" into "U-Brake" in the campaign files. __________________ SH3 CCOM12 (+Fifi 2021) Installation Tuto SH3 GWXonealex (2021) Installation Tuto SH3 WAC5.2 (2019) Installation Tuto Last edited by ericlea; 10-03-17 at 04:33 PM.