German U-Boats Compilation 2 (only VIIB & VIIC models by WISE) - Page 11

PETC · 12-22-18, 11:11 PM

1. It's installed in my Steam folder on my E drive.
2. Windows 7. I've tried both no compatibility mode and WinXPSP3 mode. No go on both. It is set to run as admin.

EDIT: I've got it working in Naval Academy but every time I try to load my save it fails. Still fiddling...

EDIT2: Given up for now. I've started from scratch three times now and re-downloaded all mods to make sure I didn't get a corrupted download. Got my save back to a loadable state and I think I'm throwing in the towel for now. If anyone has any ideas I'd be happy to try them.

Thank you.

Fifi · 12-23-18, 03:32 AM

Quote:

Originally Posted by PETC

I've got it working in Naval Academy but every time I try to load my save it fails. Still fiddling....

It can’t work on save game. You have to start new career.
And if it works on naval academy, it should works with new career

3catcircus · 12-23-18, 09:23 AM

Quote:

Originally Posted by Fifi

It can’t work on save game. You have to start new career.
And if it works on naval academy, it should works with new career

Yep. Best-case, *always* install new mods when in port. Worst-case, save games are incompatible.

I assumed he knew to only install while in port.

PETC · 12-23-18, 11:57 AM

My bad! I did not! I've been installing on the fly and so far I've got away with it. When I return to port I'll try again and if it still fails I'll start a new career.

Thanks!

Kapitän · 05-13-20, 12:58 PM

Quote:

Originally Posted by Anvar1061

Shift+N/Ctrl+N = fits/removes the UZO

Reassign command Shift + U Strl + U

data/Cfg/Commands_*.cfg

[Cmd118]
Key0=0x55,sC,"Shift+U";;Key0=0x4e,Cs,"Shift+N"

[Cmd119]
Key0=0x55,cC,"Ctl+U";;Key0=0x4e,Cc,"Ctrl+N"

[Cmd250]
Key0=0x55,sC,"Shift+U";;Key0=0x4e,Cs,"SHIFT+N"

[Cmd262]
Key0=0x55,cC,"Ctl+U";;Key0=0x4e,Cc,"Ctrl+N"

Ok, what is one to do here:

Delete the second part in each line and replace with the first part?

For example:

[Cmd118]
Add this part => Key0=0x55,sC,"Shift+U";;
and delete this part => Key0=0x4e,Cs,"Shift+N" ?

Anvar1061 · 05-13-20, 02:25 PM

the command is no longer readable after the semicolon ;

Kapitän · 05-14-20, 06:23 AM

Quote:

Originally Posted by Anvar1061

the command is no longer readable after the semicolon ;

Thanks! Which is the correct spelling please: "Ctl" or "CTRL"?

Aquelarrefox · 05-14-20, 07:05 AM

Strange, using magui, I can't use rise uzo command so it doesn't appear mounted, but if you pick uzo icon it works and show uzo screen.... Any idea why this happens? It's right by me, but I wish to know the reason. Is magui 3.4 ws with caws(but far as know caws don't modify command only chafe menu ini entries

Anvar1061 · 05-14-20, 07:10 AM

Quote:

Originally Posted by Kapitän

Thanks! Which is the correct spelling please: "Ctl" or "CTRL"?

"Ctl" = "CTRL"

Meldric · 05-27-20, 07:10 PM

Is there an addition for this mod with an updated bow spray?

EDIT:
I mean those: https://www.subsim.com/radioroom/sho...&postcount=212

Is it possible to add this spray to this mod?

Aquelarrefox · 05-27-20, 10:18 PM

Quote:

Originally Posted by Meldric

Is there an addition for this mod with an updated bow spray?

EDIT:
I mean those: https://www.subsim.com/radioroom/sho...&postcount=212

Is it possible to add this spray to this mod?

The same question for the guc1 from annenerve or the no eagle (I believe is the same path, the difference is in the turrets)

Kapitän · 05-30-20, 09:55 AM

Quote:

Originally Posted by Anvar1061

Shift+N/Ctrl+N = fits/removes the UZO

Reassign command Shift + U Strl + U

data/Cfg/Commands_*.cfg

[Cmd118]
Key0=0x55,sC,"Shift+U";;Key0=0x4e,Cs,"Shift+N"

[Cmd119]
Key0=0x55,cC,"Ctl+U";;Key0=0x4e,Cc,"Ctrl+N"

[Cmd250]
Key0=0x55,sC,"Shift+U";;Key0=0x4e,Cs,"SHIFT+N"

[Cmd262]
Key0=0x55,cC,"Ctl+U";;Key0=0x4e,Cc,"Ctrl+N"

Hi Anvar1061,

I did exactly as described above. I also, added the following for the "Crew on/off deck"-Mod:

[Cmd263]
Name=Navigation_officer
Ctxt=1
Key0=0x44,Cs,"SHIFT+D"
GoBack=Navigator_view

[Cmd264]
Name=Navigation_officer_End
Ctxt=1
Key0=0x44,Cc,"CTRL+D"

However, I still have the effect that when I press "Shift+U" or "Shift+D", both, the UZO and the Crew appear on the bridge/deck and when I press "Ctrl+U" or "Ctrl+D", both are removed again.

I'm not really sure, what to do, so that each are activated appart from each other.

Would an option be, to assign the above "Crew on/off deck" command to the Watch or Weapons Officer?

Any ideas would be appreciated ...

Thanks!

Kapitän · 06-02-20, 06:46 AM

Quote:

Originally Posted by Kapitän

Hi Anvar1061,

I did exactly as described above. I also, added the following for the "Crew on/off deck"-Mod:

[Cmd263]
Name=Navigation_officer
Ctxt=1
Key0=0x44,Cs,"SHIFT+D"
GoBack=Navigator_view

[Cmd264]
Name=Navigation_officer_End
Ctxt=1
Key0=0x44,Cc,"CTRL+D"

However, I still have the effect that when I press "Shift+U" or "Shift+D", both, the UZO and the Crew appear on the bridge/deck and when I press "Ctrl+U" or "Ctrl+D", both are removed again.

I'm not really sure, what to do, so that each are activated appart from each other.

Would an option be, to assign the above "Crew on/off deck" command to the Watch or Weapons Officer?

Any ideas would be appreciated ...

Thanks!

Ok, I moved above command to the Watch-Officer (re-wrote the text to "Watch_Officer" ...) - no change.

Then, I took that command completely out - again, no change.

So, when I now press Shift+U and Ctrl+U, both things happen: The UZO and the Crew either appear or disappear.

There seems to be somekind of link, bertween those two items, which I can't figure out ... any help is appreciated ...

Sailor Steve · 06-03-20, 07:27 AM

Quote:

Originally Posted by Aquelarrefox

Strange, using magui, I can't use rise uzo command so it doesn't appear mounted, but if you pick uzo icon it works and show uzo screen.... Any idea why this happens? It's right by me, but I wish to know the reason. Is magui 3.4 ws with caws(but far as know caws don't modify command only chafe menu ini entries

I'm not sure about the question as regards in-game usage, but in real life the UZO was just a set of binoculars attached to a special mount. When the Uboat surfaced the binoculars had to be carried up from the conning tower and mounted. When the boat dived the binocular was carried below, as they were not waterproofed.

Anvar1061 · 06-03-20, 09:27 AM

Quote:

Originally Posted by Kapitän

Ok, I moved above command to the Watch-Officer (re-wrote the text to "Watch_Officer" ...) - no change.

Then, I took that command completely out - again, no change.

So, when I now press Shift+U and Ctrl+U, both things happen: The UZO and the Crew either appear or disappear.

There seems to be somekind of link, bertween those two items, which I can't figure out ... any help is appreciated ...

https://www.subsim.com/radioroom/sho...36&postcount=1
Let's see the source. I did not find the Ace's post where it says that there is a limited number of animation files that can be used without duplication. It can be a crew + flag (which is logical).

12-22-18, 11:11 PM	#151
PETC Sailor man Join Date: Nov 2013 Posts: 43 Downloads: 31 Uploads: 0	1. It's installed in my Steam folder on my E drive. 2. Windows 7. I've tried both no compatibility mode and WinXPSP3 mode. No go on both. It is set to run as admin. EDIT: I've got it working in Naval Academy but every time I try to load my save it fails. Still fiddling... EDIT2: Given up for now. I've started from scratch three times now and re-downloaded all mods to make sure I didn't get a corrupted download. Got my save back to a loadable state and I think I'm throwing in the towel for now. If anyone has any ideas I'd be happy to try them. Thank you. Last edited by PETC; 12-23-18 at 01:06 AM.

05-13-20, 02:25 PM	#156
Anvar1061 Ocean Warrior Join Date: May 2012 Location: In the sea, on land and above Posts: 3,395 Downloads: 860 Uploads: 0	the command is no longer readable after the semicolon ; __________________

05-14-20, 07:05 AM	#158
Aquelarrefox Commander Join Date: Apr 2013 Location: Buenos Aires Posts: 456 Downloads: 159 Uploads: 0	Strange, using magui, I can't use rise uzo command so it doesn't appear mounted, but if you pick uzo icon it works and show uzo screen.... Any idea why this happens? It's right by me, but I wish to know the reason. Is magui 3.4 ws with caws(but far as know caws don't modify command only chafe menu ini entries __________________ Having a HARD TIME with CONSOLIDATE GRANMA MOD...

05-27-20, 07:10 PM	#160
Meldric Officer Join Date: May 2010 Location: Germany Posts: 237 Downloads: 167 Uploads: 0	Is there an addition for this mod with an updated bow spray? EDIT: I mean those: https://www.subsim.com/radioroom/sho...&postcount=212 Is it possible to add this spray to this mod? __________________ Die Geschichte lehrt die Menschen, dass die Geschichte die Menschen nichts lehrt. Gandhi Last edited by Meldric; 05-27-20 at 08:09 PM.

12-23-18, 11:57 AM	#154
PETC Sailor man Join Date: Nov 2013 Posts: 43 Downloads: 31 Uploads: 0	My bad! I did not! I've been installing on the fly and so far I've got away with it. When I return to port I'll try again and if it still fails I'll start a new career. Thanks!