VIIc engine-room - Page 14

Tomi_099 · 10-30-09, 06:28 PM

Quote:

Originally Posted by NZsnowman

Hi Tomi. Do you mean that openings are on the wrong height?

Perhaps, I'm afraid so, after the Print signing of the floor panels are located on the stabilizer under including the openings for the tank. Is thet o.k or ...

Tomi_099 · 10-30-09, 06:34 PM

Quote:

Originally Posted by Tomi_099

Perhaps, I'm afraid so, after the Print signing of the floor panels are located on the stabilizer under including the openings for the tank. Is thet o.k or ...

Look above picture an then .

.Thise Flor panels are half transperent , so you can see this batter

The leftmost and the rightmost I think are ok, but the two in the middle?

... I have noticed it now, which is one mirrored!!! .. i test this !!

( .. By the way of information only.
German drawings was drawn in WWII intentionally false.
That was some of the secrecy.
The parties knew about it... )

No, from another view .. you have the original from the drawing?

NZsnowman · 10-30-09, 08:40 PM

Quote:

Originally Posted by Kaleun_Endrass

Hi Tomi, NZsnowman and all who are interested

here are links to my pictures of U995:
http://rapidshare.de/files/48599373/U995.part1.rar.html
http://rapidshare.de/files/48603834/U995.part2.rar.html
http://rapidshare.de/files/48604372/U995.part3.rar.html

Just finish downloading all the picture

Thanks again

They are going to be so useful!!!!

NZsnowman · 10-30-09, 10:51 PM

Hi Tomi

I have yet to do any research on the engine room floor. I was going to start this very soon. However, there must be three hatch opening I can see so far. And if you look at this picture you are see two small around ones also

tonschk · 10-31-09, 04:30 AM

Quote:

Originally Posted by Sailor Steve

It's always nice to see the face behind the name. And your wife is lovely.

I agree

.

NZsnowman · 11-02-09, 02:44 AM

Hi Tomi

Started my research on the engine room floor today. Here the pattern and the spacing for the floor plate. Will continue with my research

NZsnowman · 11-02-09, 01:39 PM

* The engines are offset by 0.7° from the central line.
* There are six hatch cover, between frame 19 and 25.

Simon

Tomi_099 · 11-02-09, 02:42 PM

Quote:

Originally Posted by NZsnowman

* The engines are offset by 0.7° from the central line.
* There are six hatch cover, between frame 19 and 25.

Simon

.................................................. ................................

I did not understand now?

:
thou canst show me more what you mean?

------------------------

Here's something for the VIIC fans!
I found today!

++++++++++++++++++++++++++++++++++++++++++++++++

http://www.deutschland-panorama.de/m...seum/index.php

##############################################

.

If there are no circumstances does the black linnen cannel as ALPHA, and in tga or dds (3xdds/5xdds)

You can help me , now I just have to find out how big the plates to people.
Or did you want to say?

Thanks !!
.

EgoApocalypse · 11-02-09, 04:27 PM

Nice find Tomi...............

NZsnowman · 11-02-09, 10:01 PM

Quote:

Originally Posted by NZsnowman

* The engines are offset by 0.7° from the central line.
* There are six hatch cover, between frame 19 and 25.

Simon

The propeller shaft is 0.7° offset from the central line of the boat.

Six hatch cover, between frame 19 and 25.

NZsnowman · 11-02-09, 11:54 PM

Hi Tomi

The solution did come from the SUBSIM meeting

Base on pictures from Kaleun_Endrass, here what the oil overflow pipe look like

Key areas are circle in red

Simon

Link: http://www.subsim.com/radioroom/show...&postcount=129

Link: http://www.subsim.com/radioroom/show...&postcount=137

Quote:

Originally Posted by Tomi_099

This is a good question?
I'll let you disappear from any where in the hidden corner!

But a solution could give us any DEN.
What I have heard he has a huge film material from the
U995
SUBSIM of the Last Meeting.

Perhaps the mach for us the fallen,
and perhaps we also fell for the DEN,
The Ubisoft also makes for us a fallen to!

PS:
@ Admiral Von Gerlach,

Thank you

we go ahead, but will not appear before the Boss UBISOFT.
That is a matter of respect!

tonschk · 11-03-09, 06:23 AM

Thank you all of you for this excellent high degree of accuracy

NZsnowman · 11-03-09, 01:54 PM

Tomi, red arrows

Quote:

Originally Posted by NZsnowman

Hi Tomi

The solution did come from the SUBSIM meeting

Base on pictures from Kaleun_Endrass, here what the oil overflow pipe look like

Key areas are circle in red

Simon

Link: http://www.subsim.com/radioroom/show...&postcount=129

Link: http://www.subsim.com/radioroom/show...&postcount=137

NZsnowman · 11-03-09, 05:06 PM

Hi Tomi

What did you do for the area in orange? As I am loss :-( there are not many pictures of this area.

Simon

Tomi_099 · 11-03-09, 06:03 PM

Quote:

Originally Posted by NZsnowman

Hi Tomi

What did you do for the area in orange? As I am loss :-( there are not many pictures of this area.

Simon

------------------------

Thanks for the corrections I will make them right.

For the lower Aral, I have no solution.

Looks like it with the size of the tiles from 1Platte 1qm .. ..
Do you have a couple pictures. Are there plates, they are placed, or a segment.

11-02-09, 04:27 PM	#204
EgoApocalypse Lieutenant Join Date: Jun 2008 Location: The system might fail you. But dont fail youself................... Posts: 252 Downloads: 36 Uploads: 0	Nice find Tomi............... __________________

11-03-09, 06:23 AM	#207
tonschk Admiral Join Date: Mar 2007 Posts: 2,200 Downloads: 172 Uploads: 0	Thank you all of you for this excellent high degree of accuracy __________________ What we do in life echoes in Eternity

11-03-09, 05:06 PM	#209
NZsnowman Machinist's Mate Join Date: Mar 2005 Location: New Zealand Posts: 127 Downloads: 6 Uploads: 0	Missing area Hi Tomi What did you do for the area in orange? As I am loss :-( there are not many pictures of this area. Simon

10-30-09, 10:51 PM	#199
NZsnowman Machinist's Mate Join Date: Mar 2005 Location: New Zealand Posts: 127 Downloads: 6 Uploads: 0	Hi Tomi I have yet to do any research on the engine room floor. I was going to start this very soon. However, there must be three hatch opening I can see so far. And if you look at this picture you are see two small around ones also

11-02-09, 02:44 AM	#201
NZsnowman Machinist's Mate Join Date: Mar 2005 Location: New Zealand Posts: 127 Downloads: 6 Uploads: 0	Hi Tomi Started my research on the engine room floor today. Here the pattern and the spacing for the floor plate. Will continue with my research

11-02-09, 01:39 PM	#202
NZsnowman Machinist's Mate Join Date: Mar 2005 Location: New Zealand Posts: 127 Downloads: 6 Uploads: 0	* The engines are offset by 0.7° from the central line. * There are six hatch cover, between frame 19 and 25. Simon