Scale Boat

AVGWarhawk · 01-24-12, 09:19 PM

Convoy Hunter got me started on making a boat after looking at his thread on his boat build. I have posted a few of pics on progress in his thread. It's time to unveil the pile of balsa wood that I simply cut to look like a boat.

The entire thread is here: http://www.rcgroups.com/forums/showthread.php?t=1519943 at the RC forums. It is not completed yet. I have rails to create, skylight and hatch. Need to make a anchor. A canvas cover for my life boat. She is scratch built. I have nothing but the bulkhead diagrams and some pictures. She is plank on frame construction and fiber glassed over like you would find on the real boats of today. She is in essence a Lake Union Dreamboat. She sports twin screws and rudders. She get her power from two Titan 500 23 turn motors driving brass three blade props. She does have forward and reverse courtesy of the Duratrak Sprint ESC. Her battery is 3800mAh Tenergy NiMH rechargable unit. I built in a fuse for each motor. If one blows I can still motor in on one motor. Although wired together each motor can run independently if the other dies for whatever reason. She will be controlled by a Futuba Attack radio. When I get her on the Chesapeake Bay for the maiden voyage I will take video and post. It will be awhile for that.

She will be named Sweet Melissa after my wife who did not bug me about dumping about a grand into the thing.

It's only money. Can't take it with you. Might as well build a boat then.

TLAM Strike · 01-24-12, 09:26 PM

Needs moar haze gray.

Looking very nice.

Looks like there is sufficient space on her fore deck for a deck gun and maybe some ASW mortars.

nikimcbee · 01-25-12, 02:17 AM

Now where are the torpedo tubes?

So when do we go sailing?

Sailor Steve · 01-25-12, 02:29 AM

Sweet indeed.

AVGWarhawk · 01-25-12, 01:48 PM

Quote:

Originally Posted by nikimcbee

Now where are the torpedo tubes?

So when do we go sailing?

No torpedo tubes on this 1920's classic! She might be in the water in 2 to 3 weeks. I have the smaller items to add. Railing, etc. Go over the drive shafts again. Add 4 nylon thrust washers to the stuffing boxes. Additional shaft grease. We know how important shaft grease is.

Then there is the domestic cleaning tank(bathtub) test float to achieve correct waterline using lead weight. Leak check(don't suspect any as the hull is completely fiber glassed). Radio check for range. Hmmmm....need a check list.

Syxx_Killer · 01-25-12, 06:46 PM

Beautiful boat! I like it! A pair of .50 cals would look good on the bow.

AVGWarhawk · 01-25-12, 08:33 PM

I was thinking a chesty mermaid on the bow.

01-24-12, 09:19 PM	#1
AVGWarhawk Lucky Jack Join Date: Jun 2005 Location: In a 1954 Buick. Posts: 27,343 Downloads: 90 Uploads: 0	Scale Boat Convoy Hunter got me started on making a boat after looking at his thread on his boat build. I have posted a few of pics on progress in his thread. It's time to unveil the pile of balsa wood that I simply cut to look like a boat. The entire thread is here: http://www.rcgroups.com/forums/showthread.php?t=1519943 at the RC forums. It is not completed yet. I have rails to create, skylight and hatch. Need to make a anchor. A canvas cover for my life boat. She is scratch built. I have nothing but the bulkhead diagrams and some pictures. She is plank on frame construction and fiber glassed over like you would find on the real boats of today. She is in essence a Lake Union Dreamboat. She sports twin screws and rudders. She get her power from two Titan 500 23 turn motors driving brass three blade props. She does have forward and reverse courtesy of the Duratrak Sprint ESC. Her battery is 3800mAh Tenergy NiMH rechargable unit. I built in a fuse for each motor. If one blows I can still motor in on one motor. Although wired together each motor can run independently if the other dies for whatever reason. She will be controlled by a Futuba Attack radio. When I get her on the Chesapeake Bay for the maiden voyage I will take video and post. It will be awhile for that. She will be named Sweet Melissa after my wife who did not bug me about dumping about a grand into the thing. It's only money. Can't take it with you. Might as well build a boat then. __________________ “You're painfully alive in a drugged and dying culture.” ― Richard Yates, Revolutionary Road

01-24-12, 09:26 PM	#2
TLAM Strike Navy Seal Join Date: Apr 2002 Location: Rochester, New York Posts: 8,633 Downloads: 29 Uploads: 6	Needs moar haze gray. Looking very nice. Looks like there is sufficient space on her fore deck for a deck gun and maybe some ASW mortars. __________________

01-25-12, 02:17 AM	#3
nikimcbee Fleet Admiral Join Date: Jul 2003 Location: Patroling the Slot. Posts: 17,925 Downloads: 90 Uploads: 0	Now where are the torpedo tubes? So when do we go sailing? __________________

01-25-12, 02:29 AM	#4
Sailor Steve Eternal Patrol Join Date: Nov 2002 Location: High in the mountains of Utah Posts: 50,369 Downloads: 745 Uploads: 249	Sweet indeed. __________________ “Never do anything you can't take back.” —Rocky Russo

01-25-12, 08:33 PM	#7
AVGWarhawk Lucky Jack Join Date: Jun 2005 Location: In a 1954 Buick. Posts: 27,343 Downloads: 90 Uploads: 0	I was thinking a chesty mermaid on the bow. __________________ “You're painfully alive in a drugged and dying culture.” ― Richard Yates, Revolutionary Road

01-25-12, 06:46 PM	#6
Syxx_Killer Admiral Join Date: Aug 2003 Location: Michigan, USA Posts: 2,387 Downloads: 21 Uploads: 0	Beautiful boat! I like it! A pair of .50 cals would look good on the bow.