CCOM 12.0

[Kal_Maximus_U669]

Originally Posted by Fifi

Don’t know what to say...
How do you know patch isn’t working? If the boxes are checked, and if you see V16b on main screen it should work!

On side note i always put my SH3.exe/MultiSH3/JSGME/Commander application with win7 compatibility and admin rights.
Plus my SH3.exe with NO read only in properties

Yes FiFi me no longer it exceeds me all is in compatibiliter mode windo7
administrator is non read only ... I know it does not work because when I go to the naval academy that I test I lift the periscope to more than 8 knots it gets up without problem the worst is that I have lsh to install and all works perfectly ....
I would like to know that you are activating yourself in your "Hsie" as well as in your ordering the "career options" and your "gamplay setting" send by Pm if you want to make screens while waiting I thank you for your patience with me ...

[Fifi]

My Hsie



Career options

[torpille]

bonjour Fifi,
i have a probleme in a tutoriel navigation , the periscope fix doesn't work correctly .
my periscope stay up with the hight speed.
i selected in the Hsie option the periscope fix.

thx

[Fifi]

Originally Posted by torpille

bonjour Fifi,
i have a probleme in a tutoriel navigation , the periscope fix doesn't work correctly .
my periscope stay up with the hight speed.
i selected in the Hsie option the periscope fix.

thx

Have you checked both periscope fix + snorkeling fix?
If so, don’t see why it doesn’t work for you...
Make sure to check those boxes when all mods are deactivated, in the Ccom12 basis mod. Then reactivate all.

[Kal_Maximus_U669]

Originally Posted by Fifi

Have you checked both periscope fix + snorkeling fix?
If so, don’t see why it doesn’t work for you...
Make sure to check those boxes when all mods are deactivated, in the Ccom12 basis mod. Then reactivate all.

Bonjours merci pour tes screens a 2 options pret j avais la meme chose que toi... je viens de remarquer que:
"CCoM_CaptainsChoiceOfMods_Release_120_BASIS_E C" activer pas de problem
"CCoM_CaptainsChoiceOfMods_Update_Bunker-Start_120" activer pas de problem
"Ahnenerbe_WS-GUI_1920x1080_for_CCoM_by Wurmonkel" problem!!!!
toutes les options "Hsie" son desactiver sauf les 2 de bases...dans le "A-Configuration_CCoM_12_0.pdf" il est dit de repeter la procedure 3 je comprend pas ou il veux en venir....!
@ torpille verifie si tu as la meme chose...


Hello thanks for your screens with 2 options ready I had the same thing as you ... I just noticed that:
"CCoM_CaptainsChoiceOfMods_Release_120_BASIS_E C" activate no problem
"CCoM_CaptainsChoiceOfMods_Update_Bunker-Start_120" activate no problem
"Ahnenerbe_WS-GUI_1920x1080_for_CCoM_by Wurmonkel" problem !!!!
all the "Hsie" options are deactivated except the 2 basic ones ... in the "A-Configuration_CCoM_12_0.pdf" it says to repeat procedure 3 I don't understand where it is coming from ....!
@ torpedo check if you have the same thing ...

[torpille]

yes but are you tried the tutoriel ?

perhaps it's only the tutoriel ?

merci

[torpille]

Originally Posted by Kal_Maximus_U669

Bonjours merci pour tes screens a 2 options pret j avais la meme chose que toi... je viens de remarquer que:
"CCoM_CaptainsChoiceOfMods_Release_120_BASIS_E C" activer pas de problem
"CCoM_CaptainsChoiceOfMods_Update_Bunker-Start_120" activer pas de problem
"Ahnenerbe_WS-GUI_1920x1080_for_CCoM_by Wurmonkel" problem!!!!
toutes les options "Hsie" son desactiver sauf les 2 de bases...dans le "A-Configuration_CCoM_12_0.pdf" il est dit de repeter la procedure 3 je comprend pas ou il veux en venir....!
@ torpille verifie si tu as la meme chose...


Hello thanks for your screens with 2 options ready I had the same thing as you ... I just noticed that:
"CCoM_CaptainsChoiceOfMods_Release_120_BASIS_E C" activate no problem
"CCoM_CaptainsChoiceOfMods_Update_Bunker-Start_120" activate no problem
"Ahnenerbe_WS-GUI_1920x1080_for_CCoM_by Wurmonkel" problem !!!!
all the "Hsie" options are deactivated except the 2 basic ones ... in the "A-Configuration_CCoM_12_0.pdf" it says to repeat procedure 3 I don't understand where it is coming from ....!
@ torpedo check if you have the same thing ...

salut kal_Maximus_u669,

i don't understand that you want?
sorry

[Kal_Maximus_U669]

Originally Posted by torpille

salut kal_Maximus_u669,

i don't understand that you want?
sorry

je viens de refaire une "install fresh" en changent de chemin totalement different"D:\CcoM12" ca ne fonctionne toujours pas et je laisse tomber maintenant ca suffit!!!poutant j ai respecter au pied de la lettre les instructions c est la premiere fois que je suis en echec...avec ces mods...!

ce que je te demandais c est si tu as verifier quand tu active Ahnenerbe_WS-GUI_1920x1080_for_CCoM_by Wurmonkel si dans la racine de ton jeu tu as recocher tes options Hsie tu as windo 7 ou 10?

[Fifi]

Originally Posted by Kal_Maximus_U669

je viens de refaire une "install fresh" en changent de chemin totalement different"D:\CcoM12" ca ne fonctionne toujours pas et je laisse tomber maintenant ca suffit!!!poutant j ai respecter au pied de la lettre les instructions c est la premiere fois que je suis en echec...avec ces mods...!

ce que je te demandais c est si tu as verifier quand tu active Ahnenerbe_WS-GUI_1920x1080_for_CCoM_by Wurmonkel si dans la racine de ton jeu tu as recocher tes options Hsie tu as windo 7 ou 10?

Je n’utilise pas Ahnenerbe_WS-GUI_1920x1080_for_CCoM_by Wurmonkel...
J’utilise ARB Wide Gui parce que j’ai alors le bouton TDC on/off.
Je l’ai d’ailleurs modifié pour avoir les mêmes réglages que le Ahnenerbe by Wurmonkel (différents zooms etc)
Tu peux essayer le ARB car c’est juste un Ahnenerbe amélioré
J’ai un Win 10.

[Kal_Maximus_U669]

Originally Posted by Fifi

Je n’utilise pas Ahnenerbe_WS-GUI_1920x1080_for_CCoM_by Wurmonkel...
J’utilise ARB Wide Gui parce que j’ai alors le bouton TDC on/off.
Je l’ai d’ailleurs modifié pour avoir les mêmes réglages que le Ahnenerbe by Wurmonkel (différents zooms etc)
Tu peux essayer le ARB car c’est juste un Ahnenerbe amélioré
J’ai un Win 10.

thank's FiFi il s agit de celui de "Brodaga222" non?
sinon en utilisant le patch kit de "LsH"cela a fonctionner... mais les barres de chargement ne sont plus correcte!!!
je regarde ca plus tard et je te tiends au bouillon...

[Fifi]

Originally Posted by Kal_Maximus_U669

thank's FiFi il s agit de celui de "Brodaga222" non?
sinon en utilisant le patch kit de "LsH"cela a fonctionner... mais les barres de chargement ne sont plus correcte!!!
je regarde ca plus tard et je te tiends au bouillon...

Alors les barres de chargement c’est vraiment pas grave!
Moi aussi ça le faisait
Oui c’est le Brodaga222.

[Kal_Maximus_U669]

Originally Posted by Fifi

Alors les barres de chargement c’est vraiment pas grave!
Moi aussi ça le faisait
Oui c’est le Brodaga222.

il faudrait refaire les "tga"

[Fifi]

Originally Posted by Kal_Maximus_U669

il faudrait refaire les "tga"

Yes, it’s the easiest way. Or tweak the SH3.exe to restaure the loading bar at the right place ... but very hard.
Go ahead, open your photoshop and create new tga!

[Kal_Maximus_U669]

Originally Posted by Fifi

Yes, it’s the easiest way. Or tweak the SH3.exe to restaure the loading bar at the right place ... but very hard.
Go ahead, open your photoshop and create new tga!

Yes I was already watching since but I am not a Photoshop expert maybe I will try...

[Kapitän]

Originally Posted by John Pancoast

Just use the "find" function in notepad to find the one you want. Type in a word for the search. I.e. If shift n controls the uzo, you could type "shift n", "shift+n", or "uzo" into the "find" function to find it.
There is also a program to change the keystrokes to whatever you want. Can't remember the name of it, maybe do a search in the downloads section.
The commands.cfg file is a very simple format, easy to make changes.

Hi, I now tried the following:

In the Mod, I took out/deleted the cfg. file, with the commands in it, which are the only files in the cfg. file of the Mod.

Instead of this I added the following command lines in the cfg. file of the game itself, as new lines after the last entry in the Nav Officer commands, with the running numbers:

[Cmd263]
Name=Navigation_officer
Ctxt=1
Key0=0x44,Cs,"SHIFT+D"
GoBack=Navigator_view

[Cmd264]
Name=Navigation_officer_End
Ctxt=1
Key0=0x44,Cc,"CTRL+D"

Now what it is happening is, that when I press SHIFT+D or SHIFT+N, both the UZO is placed on the bridge and the crew appears on the deck (and visa versa, when I press CTRL+D or CTRL+N).

My question is: How do I need to change the above entry, so that when I press SHIFT/CTRL+D, the UZO is not affected by that action but only the crew is placed on/removed from deck, i.e., that the UZO will only be placed on/off the bridge, when pressing SHIFT/CTRL+N?

And here are the UZO commands:

;NAVIGATION OFFICER

[Cmd250]
Name=Navigation_officer
Ctxt=1
Key0=0x4e,Cs,"Shift+N"
GoBack=Navigator_view

(...)

[Cmd262]
Name=Navigation_officer_end
Ctxt=1
Key0=0x4e,Cc,"CTRL+N"
GoBack=Navigator_view