SH3 Commander-The Complete Super Deluxe Thallium Commander's Special Ultimate Edition - Page 75

Anvar1061 · 08-10-17, 03:33 PM

OLC GOLD MKII http://www.subsim.com/radioroom/down...do=file&id=997 contains a folder SH3 Commander solved Salvo&Single JSGME ready.

PapaSmurf · 08-16-17, 10:22 PM

I am having a bit of trouble. Does anyone know if the Supplement to V16b1(JSGME) is compatible with sh3 commander with GWX3? When I activate the above mentioned mod my game crashes during the initial load. I also noticed that when it is activated, my profile screen in sh3 commander shows "error" in all flotilla related boxes. Without this activated my watch officer won't automatically return to the bride when surfacing, TC slows to 1 every time I get a radio message and I cannot utilize the bad weather fix. I found some information about this with NYGM but can find nothing concerning GWX, which I use. As soon as I deactivate the Supplement, everything works good but I do not get the benefits of the fixes. The mod works fine before sh3 Commander is added. Any help is appreciated greatly. Thanks.

Anvar1061 · 08-17-17, 05:00 AM

http://www.subsim.com/radioroom/show...29&postcount=6

PapaSmurf · 08-17-17, 12:09 PM

Anvar, thank you for the help. The link must be obsolete because it doesn't take me to a web page. Again, thank you.

Anvar1061 · 08-17-17, 12:38 PM

Quote:

Originally Posted by PapaSmurf

Anvar, thank you for the help. The link must be obsolete because it doesn't take me to a web page. Again, thank you.

http://www.subsim.com/radioroom/show...7&postcount=61
http://www.mediafire.com/file/5icqsk...menu+patch.rar

Delta Wolf · 07-05-18, 01:55 PM

Hey Guys,

I seem to be having an issue with SH3 Commander just wanted to know if anyone could help?
So i have just done a fresh install of SH3 and GWX followed by SH3 Commander 3.2 then the GWX Commander files needed.

Thing is when i launch SH3 Commander the UI is stuck half over my screen and because the tips are enabled from the start i can't drag the program back to the middle of the screen.

I can untick the tips box but thats all, as i can only see the left side of the UI.
Only way to exit is to kill the process but because of that when i reload it im back with the tips enabled again.
Is there anyway to disable the startup tips from the files in the program?, if i do this then i should be able to drag the box back onto the screen.
Things i have tried.... Re-installed, Run as Admin and Win 7 Compat etc

Thanks

Delta Wolf · 07-05-18, 02:39 PM

Update

I managed to get to the tick on the UI by changing my desktop resolution before launching Commander, however Commander still launches half over my screen for some reason if anyone knows a fix that would be great.

Thanks

JeromeHeretic · 11-26-18, 12:21 AM

I like to let the sub grow old as career of player continue. From completely new skin at the start of career to completely rusted crap at the end, but i don't understand how to do it.
I think, that good trigger for changing of skin can be player renown (or maybe player score).

And second thing, which can be in conflict with this is, that i like to have winter skins with ice and snow on the board. So at winter times (let's say from month 10 over new year to end of february) i want to load iced skin, but it also depend on players renown, because i can load new winter skin, middle aged winter skin or old winter skin.

Is there somebody who knows how to do it?
I would like load whole data folder with correct textures, but as i'm looking into Static settings.cfg, it looks, that only what i can do is rewrite filenames in subs .dat file :-(

Doesn't exist some simple way, like with folders in Date directory?

Kapt Z · 02-06-19, 12:12 AM

Had to reboot my install and can't remember where I go to adjust the patrol grid renown in SHC.

I have changed it in the main SH folder, but when I run Commander it deletes my changes. I know I have to change it in Commander just can't remember which files.

Please point me in the right direction.

Thanks!

Kapt Z · 02-07-19, 07:20 PM

Sorry, I should have been clearer in my question.

I want to manually adjust the RENOWN points I receive for patrolling my assigned grid for 24 hours. I use GWX and a few minor mods and run the game through Commander. I know GWX does not award points for the grid, but I want to tweak it so I get some credit for completing that task.

When I adjust the renown points for the grid in the SH3 folder my changes are deleted when I run the game through Commander. I know there is somewhere else I need to go to make the changes so that they are retained.

Kapt Z · 02-07-19, 10:36 PM

Figured it out. Forgot to change some values in the Basic file.

All good!

VONHARRIS · 02-10-19, 08:25 AM

Ok here goes.

After many years I have managed to have a stable SH3 + GWX installation my choice of mods.

BUT

I can not remember how to make SH3 Commander to use names for the MFM mod using Sailor Steve's updated ship names.

I had this problem before and solved it.
I have tried to find my older post but failed -- dud torpedo I guess.

Thank you in advance

Anvar1061 · 02-11-19, 10:53 AM

http://www.subsim.com/radioroom/show...14&postcount=3

"With my newest update I created new class names for all of IABL's Merchant Fleet Mod so there wouldn't be class names like 'M10B'."

VONHARRIS · 02-12-19, 03:36 AM

Quote:

Originally Posted by Anvar1061

http://www.subsim.com/radioroom/show...14&postcount=3

"With my newest update I created new class names for all of IABL's Merchant Fleet Mod so there wouldn't be class names like 'M10B'."

Thank you for this.

I had already fixed the issue but this is really helpful.

Ersatzjack · 03-20-19, 01:38 AM

Anyone know where I can get this program? On the downloads section I keep getting the message that the server is busy but I never have this problem downloading other programs/mods. Is the link broken? Any suggestions appreciated as I'd like to try it. I use the GWX3.0 Mod and have the other program needed (config file updates).

02-06-19, 12:12 AM	#1119
Kapt Z Grey Wolf Join Date: Aug 2007 Location: ...somewhere in the swamps of Jersey. Posts: 909 Downloads: 157 Uploads: 0	Adjusting patrol grid renown in SHComm? Had to reboot my install and can't remember where I go to adjust the patrol grid renown in SHC. I have changed it in the main SH folder, but when I run Commander it deletes my changes. I know I have to change it in Commander just can't remember which files. Please point me in the right direction. Thanks! __________________ ...I fought in many guises, many names, but always me. Patton

02-07-19, 07:20 PM	#1120
Kapt Z Grey Wolf Join Date: Aug 2007 Location: ...somewhere in the swamps of Jersey. Posts: 909 Downloads: 157 Uploads: 0	Sorry, I should have been clearer in my question. I want to manually adjust the RENOWN points I receive for patrolling my assigned grid for 24 hours. I use GWX and a few minor mods and run the game through Commander. I know GWX does not award points for the grid, but I want to tweak it so I get some credit for completing that task. When I adjust the renown points for the grid in the SH3 folder my changes are deleted when I run the game through Commander. I know there is somewhere else I need to go to make the changes so that they are retained. __________________ ...I fought in many guises, many names, but always me. Patton

02-07-19, 10:36 PM	#1121
Kapt Z Grey Wolf Join Date: Aug 2007 Location: ...somewhere in the swamps of Jersey. Posts: 909 Downloads: 157 Uploads: 0	Figured it out. Forgot to change some values in the Basic file. All good! __________________ ...I fought in many guises, many names, but always me. Patton

02-10-19, 08:25 AM	#1122
VONHARRIS Konteradmiral Join Date: Apr 2010 Location: Greece Posts: 1,992 Downloads: 300 Uploads: 0	trouble with names Ok here goes. After many years I have managed to have a stable SH3 + GWX installation my choice of mods. BUT I can not remember how to make SH3 Commander to use names for the MFM mod using Sailor Steve's updated ship names. I had this problem before and solved it. I have tried to find my older post but failed -- dud torpedo I guess. Thank you in advance

03-20-19, 01:38 AM	#1125
Ersatzjack Nub Join Date: Jun 2018 Posts: 3 Downloads: 30 Uploads: 0	SH3 Commander V3.2? Anyone know where I can get this program? On the downloads section I keep getting the message that the server is busy but I never have this problem downloading other programs/mods. Is the link broken? Any suggestions appreciated as I'd like to try it. I use the GWX3.0 Mod and have the other program needed (config file updates).

08-10-17, 03:33 PM	#1111
Anvar1061 Ocean Warrior Join Date: May 2012 Location: In the sea, on land and above Posts: 3,487 Downloads: 878 Uploads: 0	OLC GOLD MKII http://www.subsim.com/radioroom/down...do=file&id=997 contains a folder SH3 Commander solved Salvo&Single JSGME ready.

08-16-17, 10:22 PM	#1112
PapaSmurf Bosun Join Date: Sep 2016 Location: On the front of a bass boat or in a deer stand Posts: 64 Downloads: 129 Uploads: 0	I am having a bit of trouble. Does anyone know if the Supplement to V16b1(JSGME) is compatible with sh3 commander with GWX3? When I activate the above mentioned mod my game crashes during the initial load. I also noticed that when it is activated, my profile screen in sh3 commander shows "error" in all flotilla related boxes. Without this activated my watch officer won't automatically return to the bride when surfacing, TC slows to 1 every time I get a radio message and I cannot utilize the bad weather fix. I found some information about this with NYGM but can find nothing concerning GWX, which I use. As soon as I deactivate the Supplement, everything works good but I do not get the benefits of the fixes. The mod works fine before sh3 Commander is added. Any help is appreciated greatly. Thanks.

08-17-17, 05:00 AM	#1113
Anvar1061 Ocean Warrior Join Date: May 2012 Location: In the sea, on land and above Posts: 3,487 Downloads: 878 Uploads: 0	http://www.subsim.com/radioroom/show...29&postcount=6

08-17-17, 12:09 PM	#1114
PapaSmurf Bosun Join Date: Sep 2016 Location: On the front of a bass boat or in a deer stand Posts: 64 Downloads: 129 Uploads: 0	Anvar, thank you for the help. The link must be obsolete because it doesn't take me to a web page. Again, thank you.

07-05-18, 01:55 PM	#1116
Delta Wolf Engineer Join Date: Apr 2013 Posts: 209 Downloads: 155 Uploads: 0	Hey Guys, I seem to be having an issue with SH3 Commander just wanted to know if anyone could help? So i have just done a fresh install of SH3 and GWX followed by SH3 Commander 3.2 then the GWX Commander files needed. Thing is when i launch SH3 Commander the UI is stuck half over my screen and because the tips are enabled from the start i can't drag the program back to the middle of the screen. I can untick the tips box but thats all, as i can only see the left side of the UI. Only way to exit is to kill the process but because of that when i reload it im back with the tips enabled again. Is there anyway to disable the startup tips from the files in the program?, if i do this then i should be able to drag the box back onto the screen. Things i have tried.... Re-installed, Run as Admin and Win 7 Compat etc Thanks

07-05-18, 02:39 PM	#1117
Delta Wolf Engineer Join Date: Apr 2013 Posts: 209 Downloads: 155 Uploads: 0	Update I managed to get to the tick on the UI by changing my desktop resolution before launching Commander, however Commander still launches half over my screen for some reason if anyone knows a fix that would be great. Thanks

11-26-18, 12:21 AM	#1118
JeromeHeretic Machinist's Mate Join Date: Jun 2011 Location: N 50 4 E 14 25 Posts: 127 Downloads: 266 Uploads: 0	I like to let the sub grow old as career of player continue. From completely new skin at the start of career to completely rusted crap at the end, but i don't understand how to do it. I think, that good trigger for changing of skin can be player renown (or maybe player score). And second thing, which can be in conflict with this is, that i like to have winter skins with ice and snow on the board. So at winter times (let's say from month 10 over new year to end of february) i want to load iced skin, but it also depend on players renown, because i can load new winter skin, middle aged winter skin or old winter skin. Is there somebody who knows how to do it? I would like load whole data folder with correct textures, but as i'm looking into Static settings.cfg, it looks, that only what i can do is rewrite filenames in subs .dat file :-( Doesn't exist some simple way, like with folders in Date directory?

02-11-19, 10:53 AM	#1123
Anvar1061 Ocean Warrior Join Date: May 2012 Location: In the sea, on land and above Posts: 3,487 Downloads: 878 Uploads: 0	http://www.subsim.com/radioroom/show...14&postcount=3 "With my newest update I created new class names for all of IABL's Merchant Fleet Mod so there wouldn't be class names like 'M10B'."