[REL] Multiple UIs for SH5 with TDC - Page 699

Fifi · 07-21-13, 10:16 PM

Solved!

Your UI HAS to be installed C:/Ubisoft/Silent Hunter 5...
As i installed as a second installation, i placed it in C:/TDW UI/Silent Hunter 5, and had the troubles above

So i put my first install CSP Magui in other folder (C:/DrJones/Silent Hunter 5) and your UI back in Ubisoft ---> it runs fine!

(CSP Magui doesn't need the Ubisoft path to work fine btw)

TheDarkWraith · 07-21-13, 10:36 PM

Quote:

Originally Posted by Fifi

Solved!

Your UI HAS to be installed C:/Ubisoft/Silent Hunter 5...
As i installed as a second installation, i placed it in C:/TDW UI/Silent Hunter 5, and had the troubles above

So i put my first install CSP Magui in other folder (C:/DrJones/Silent Hunter 5) and your UI back in Ubisoft ---> it runs fine!

(CSP Magui doesn't need the Ubisoft path to work fine btw)

I read your registry to determine installation path. That would explain why it was giving you problems. You moved it but never updated your registry to say so.

Fifi · 07-21-13, 10:42 PM

Yes, and when i ran your UI (with those trouble mentioned above), back looking in my CSP Magui install (the first one) i found all your TDW files in it!

That's what highlighted my bulbe

Fifi · 07-22-13, 12:09 AM

Now, for some reason, 2 little strange things...
- When entering game on deck as usual, now i see front periscope half raised for 3 seconds, and then it lower itself...(first time i see this ever)
- In hydrophone, i still see unknown when needle is 180...but all others entries are showing fine (even submarine

)

Note: i have 1 latest generic patcher per install, each one set with right paths.
Both on my desktop.
For your UI, i have clean act files and exe...as i did with first install.
But in Magui, i don't see the unknown in my back!

TheDarkWraith · 07-22-13, 12:14 AM

Quote:

Originally Posted by Fifi

Now, for some reason, 2 little strange things...
- When entering game on deck as usual, now i see front periscope half raised for 3 seconds, and then it lower itself...(first time i see this ever)
- In hydrophone, i still see unknown when needle is 180...but all others entries are showing fine (even submarine

)

Note: i have 1 latest generic patcher per install, each one set with right paths.
Both on my desktop.
For your UI, i have clean act files and exe...

1st one can't help you with, never had that problem before.

The hydrophone one I just verified. The new code I put in is allowing the player's sub to be a contact and thus you get the unknown. I'll have to test for the player's sub so this doesn't happen. I'll rewrite that code tomorrow

You don't see it in Magui because you are probably missing the required menu.txt entries.

TheDarkWraith · 07-22-13, 01:02 AM

v7.5.0 test version 9 available here: http://www.mediafire.com/?f4f7obnt6pujd3f

This is needed to test the new Toggle_marking_lines command added by the Generic Patcher

Also added a 0.5X scope power to the OBS scope for use with the sextant.

There are two new menu entries added:
9605=Bearing:
9606=Toggle marking lines visibility

Fifi · 07-22-13, 01:54 AM

Quote:

Originally Posted by TheDarkWraith

You don't see it in Magui because you are probably missing the required menu.txt entries.

Well, since i've tried your new UI version, back in Magui i now get the "unknown" at 180°

Quote:

I'll rewrite that code tomorrow

Cool

Quote:

This is needed to test the new Toggle_marking_lines command added by the Generic Patcher

Also added a 0.5X scope power to the OBS scope for use with the sextant.

Doesn't work with ermtgufs btw...

EDIT: about sextant in SH5, have you seen this: http://www.subsim.com/radioroom/showthread.php?t=194033

TheDarkWraith · 07-22-13, 05:50 PM

Anyone have any ideas for the backscene (.dds file) for the Sextant? If you have one post it. I'm coding it in now for my UIs mod.

Fifi · 07-22-13, 08:12 PM

Taking about dds...if TDW is ok, and if somebody is interested, i can post my little mod for NewUIs new scopes and UZO

TheDarkWraith · 07-22-13, 08:37 PM

Quote:

Originally Posted by Fifi

Taking about dds...if TDW is ok, and if somebody is interested, i can post my little mod for NewUIs new scopes and UZO

post away

I think I like what I've come up with for the sextant. Using the UZO:

You no longer need to have TDC on for the sextant to work. You simply bring up the sextant window (Navigator's order bar) and Click Enable sextant. Then click on the button with the tooltip that says Click to use sextant.

Added a 0.5X zoom level to the UZO (what the screenie shows)

I'm going to add something that will give you true north relative bearing

I still have to revamp the sextant window box.

THE_MASK · 07-22-13, 10:28 PM

Just a question . What is the different time that is shown on the debug info enabled in the Scene Dat ?

gap · 07-23-13, 06:33 AM

Quote:

Originally Posted by TheDarkWraith

Anyone have any ideas for the backscene (.dds file) for the Sextant? If you have one post it. I'm coding it in now for my UIs mod.

Do you mean something similar to scope masks?

Quote:

Originally Posted by TheDarkWraith

I think I like what I've come up with for the sextant. Using the UZO:

I like it!

Quote:

Originally Posted by TheDarkWraith

You no longer need to have TDC on for the sextant to work.

That's good!

Quote:

Originally Posted by TheDarkWraith

You simply bring up the sextant window (Navigator's order bar) and Click Enable sextant. Then click on the button with the tooltip that says Click to use sextant.

Do you mean that you can access the sextant directly from order bar, without need to enter UZO station before? That would be good also

Quote:

Originally Posted by TheDarkWraith

Added a 0.5X zoom level to the UZO (what the screenie shows)

Will this new zoom level affect the "normal" UZO view, or it will be only enabled when in sextant mode? Our scope modders have made their best to keep optics magnification levels as historical as possible, and we should respect their work

Quote:

Originally Posted by TheDarkWraith

I'm going to add something that will give you true north relative bearing

Quote:

Originally Posted by TheDarkWraith

I still have to revamp the sextant window box.

TheDarkWraith · 07-23-13, 01:17 PM

Forgot how long it takes to develop using the script engine of the game

Coded in all the new changes for the Sextant (except for converting to degrees/minutes/seconds):

My sub's course was 44 degrees.

The set reference azimuth allows you to place the sextant on one object, click set reference azimuth (will be placed in the Ref azimuth), place sextant on another object and read out the azimuth difference (Ref azimuth diff). Ref azimuths are in relation to the sextant only (meaning in relation to the sub - if you change course they do not get updated with your new course).

Any other data that needs to be shown?

For testing purposes I have 3 zoom levels for the sextant - 0.5X, 1.5X, and 7X (zoom level is not shown)

I'll upload new test version here very shortly so Sjizzle can test it out.

Sjizzle · 07-23-13, 02:21 PM

Quote:

Originally Posted by TheDarkWraith

Forgot how long it takes to develop using the script engine of the game

Coded in all the new changes for the Sextant (except for converting to degrees/minutes/seconds):

My sub's course was 44 degrees.

The set reference azimuth allows you to place the sextant on one object, click set reference azimuth (will be placed in the Ref azimuth), place sextant on another object and read out the azimuth difference (Ref azimuth diff). Ref azimuths are in relation to the sextant only (meaning in relation to the sub - if you change course they do not get updated with your new course).

Any other data that needs to be shown?

For testing purposes I have 3 zoom levels for the sextant - 0.5X, 1.5X, and 7X (zoom level is not shown)

I'll upload new test version here very shortly so Sjizzle can test it out.

i am waiting for that till then ill go outside cos today it's a clean sky here and i can take some shots with this one

Fifi · 07-23-13, 03:49 PM

^^ Wow...i see you're a celestial fan!

07-21-13, 10:16 PM	#10471
Fifi Navy Seal Join Date: Dec 2012 Location: France Posts: 5,772 Downloads: 456 Uploads: 0	Solved! Your UI HAS to be installed C:/Ubisoft/Silent Hunter 5... As i installed as a second installation, i placed it in C:/TDW UI/Silent Hunter 5, and had the troubles above So i put my first install CSP Magui in other folder (C:/DrJones/Silent Hunter 5) and your UI back in Ubisoft ---> it runs fine! (CSP Magui doesn't need the Ubisoft path to work fine btw) __________________ https://www.mediafire.com/file/23e48...N_V5.9.7z/file

07-21-13, 10:42 PM	#10473
Fifi Navy Seal Join Date: Dec 2012 Location: France Posts: 5,772 Downloads: 456 Uploads: 0	Yes, and when i ran your UI (with those trouble mentioned above), back looking in my CSP Magui install (the first one) i found all your TDW files in it! That's what highlighted my bulbe __________________ https://www.mediafire.com/file/23e48...N_V5.9.7z/file

07-22-13, 12:09 AM	#10474
Fifi Navy Seal Join Date: Dec 2012 Location: France Posts: 5,772 Downloads: 456 Uploads: 0	Now, for some reason, 2 little strange things... - When entering game on deck as usual, now i see front periscope half raised for 3 seconds, and then it lower itself...(first time i see this ever) - In hydrophone, i still see unknown when needle is 180...but all others entries are showing fine (even submarine ) Note: i have 1 latest generic patcher per install, each one set with right paths. Both on my desktop. For your UI, i have clean act files and exe...as i did with first install. But in Magui, i don't see the unknown in my back! __________________ https://www.mediafire.com/file/23e48...N_V5.9.7z/file

07-22-13, 08:12 PM	#10479
Fifi Navy Seal Join Date: Dec 2012 Location: France Posts: 5,772 Downloads: 456 Uploads: 0	Taking about dds...if TDW is ok, and if somebody is interested, i can post my little mod for NewUIs new scopes and UZO __________________ https://www.mediafire.com/file/23e48...N_V5.9.7z/file

07-23-13, 03:49 PM	#10485
Fifi Navy Seal Join Date: Dec 2012 Location: France Posts: 5,772 Downloads: 456 Uploads: 0	^^ Wow...i see you're a celestial fan! __________________ https://www.mediafire.com/file/23e48...N_V5.9.7z/file

07-22-13, 01:02 AM	#10476
TheDarkWraith Black Magic Join Date: Jun 2007 Posts: 11,962 Downloads: 147 Uploads: 5	v7.5.0 test version 9 available here: http://www.mediafire.com/?f4f7obnt6pujd3f This is needed to test the new Toggle_marking_lines command added by the Generic Patcher Also added a 0.5X scope power to the OBS scope for use with the sextant. There are two new menu entries added: 9605=Bearing: 9606=Toggle marking lines visibility

07-22-13, 05:50 PM	#10478
TheDarkWraith Black Magic Join Date: Jun 2007 Posts: 11,962 Downloads: 147 Uploads: 5	Anyone have any ideas for the backscene (.dds file) for the Sextant? If you have one post it. I'm coding it in now for my UIs mod.

07-22-13, 10:28 PM	#10481
THE_MASK Ace of the deep . Join Date: Jan 2006 Posts: 9,226 Downloads: 901 Uploads: 73	Just a question . What is the different time that is shown on the debug info enabled in the Scene Dat ?

07-23-13, 01:17 PM	#10483
TheDarkWraith Black Magic Join Date: Jun 2007 Posts: 11,962 Downloads: 147 Uploads: 5	Forgot how long it takes to develop using the script engine of the game Coded in all the new changes for the Sextant (except for converting to degrees/minutes/seconds): My sub's course was 44 degrees. The set reference azimuth allows you to place the sextant on one object, click set reference azimuth (will be placed in the Ref azimuth), place sextant on another object and read out the azimuth difference (Ref azimuth diff). Ref azimuths are in relation to the sextant only (meaning in relation to the sub - if you change course they do not get updated with your new course). Any other data that needs to be shown? For testing purposes I have 3 zoom levels for the sextant - 0.5X, 1.5X, and 7X (zoom level is not shown) I'll upload new test version here very shortly so Sjizzle can test it out.