[REL]OpenHatch_V3_RH released - Page 32

Reece · 03-19-07, 12:46 AM

THANK YOU, THANK YOU, THANK YOU, THANK YOU DD!

CptGrayWolf · 03-19-07, 02:11 AM

Quote:

Originally Posted by DivingDuck

Moin,

so many have asked for. Here it is, obs periscope back to stock position. Ready for download at my FileFront Site. Use JSGME to enable, no further installation instructions included.

For all of you who like the obs periscope in its correct position. Don´t panic. There will be an updated version with fixed fragments too. I´m just moving the periscope´s floor housing to a position underneath.

And I´ve fixed some fragments intersecting the bulkhead to the radio room.

Regards,
DD

Tigrone · 03-19-07, 02:12 AM

At some point you will have to give it up and accept that it is almost perfect, not to distract you from the pursuit of perfection.

Kumando · 03-19-07, 05:37 AM

Thanks DD, im looking forward for the correct obs periscope fix

Rubini · 03-19-07, 08:43 AM

Thanks DD!
Perfect work as always!

I also prefer the stock Periscope position because we have an obstructive vision of your awesome work and that office is in it's correct default positions when waiting commands.

Thanks mate!

Just a question: the GWX hi resolution interior and gauges are also added on this stock position version?:hmm: (i noticed the size of the files, they are so different...)

Reece · 03-19-07, 09:21 AM

Yes Rubini, the officer, even with stock, is not in his usual position, must be a problem with the mod that he can't stand near the hatch!

I can live with that though!

DivingDuck · 03-19-07, 10:27 AM

Moin,

Quote:

Originally Posted by Rubini

Just a question: the GWX hi resolution interior and gauges are also added on this stock position version?:hmm: (i noticed the size of the files, they are so different...)

THIS IS AN UPDATE ONLY, NO STAND ALONE VERSION.
It contains the NSS_Uboat7_CR.dat file only. You have to enable it "on top" of V1.01. If you´ve enabled TypeVII_OpenHatch_HiRes earlier the HiRes interior and gauges will be used.
Regards,
DD

Rubini · 03-19-07, 10:32 AM

Quote:

Originally Posted by DivingDuck

Moin,

Quote:

Originally Posted by Rubini

Just a question: the GWX hi resolution interior and gauges are also added on this stock position version?:hmm: (i noticed the size of the files, they are so different...)

THIS IS AN UPDATE ONLY, NO STAND ALONE VERSION.
It contains the NSS_Uboat7_CR.dat file only. You have to enable it "on top" of V1.01. If you´ve enabled TypeVII_OpenHatch_HiRes earlier the HiRes interior and gauges will be used.
Regards,
DD

Thanks DD!
Even better then!

ReallyDedPoet · 03-19-07, 01:51 PM

Quote:

Originally Posted by Penelope_Grey

Quote:

Originally Posted by reallydedpoet

Quote:

Originally Posted by Penelope_Grey

It was me yes.

And it was another thread.

I meant to ask in the earlier post if you also found a fix

Oh yeah I am sweet now with the mod, it works fine.

CaptainNemo12 · 03-19-07, 07:46 PM

About the stock periscope mod, do you install that on top of the Hi-Res mod?

ReallyDedPoet · 03-19-07, 07:58 PM

http://www.subsim.com/radioroom/show...&postcount=473

Should be right at DD post regarding this. Roll Back Commander and be in port wheh doing this. It is JSGME compatible, so if there are problems, uninstall and post issues here

Hope this helps.

panthercules · 03-19-07, 10:39 PM

Quote:

Originally Posted by reallydedpoet

http://www.subsim.com/radioroom/show...&postcount=473

Should be right at DD post regarding this. Roll Back Commander and be in port wheh doing this. It is JSGME compatible, so if there are problems, uninstall and post issues here

Hope this helps.

I may just have been lucky so far, and I'm sure it's better practice to be in port, but I couldn't wait so I loaded up via JSGME in mid-patrol and so far so good - no problems with the install. And this is very cool - I'm still blown away. I'd read about but never really saw much point in using the free-cam to walk about inside the sub, but it was way cool to do that and walk right through the open hatch into the radio room and then back again.

Now, if we could just add some animated crewmen running through the control room through the hatch into the radio compartment on their way to the bow when we crash dive

03-19-07, 10:46 PM

:rotfl:
If we add Mick Dundee from the harbor, he could do a walk through!

Problem is, he may walk several hundred meters out the front and
back of the sub!!!

Unless we can find a way to cut his path down. :hmm:

Captain Strangelove · 03-20-07, 02:38 AM

I can't really explain it, but this fine modification changes SHIII more than I had expected. The sub just seems much more alive and real.
You always suspected they were after this closed hatch, but then again it wasn't modeled.
And now you can see the dials on the hydrophone moving. Unbe-smeggin'-lievable!

Go for the crew room aft of the central, boys!

Cheers

Kai

CptGrayWolf · 03-20-07, 07:18 AM

Quote:

Originally Posted by panthercules

Now, if we could just add some animated crewmen running through the control room through the hatch into the radio compartment on their way to the bow when we crash dive

All hands forwaaaard! Come on move it, move it! This isn't a @#$% pleasure cruise!

03-19-07, 12:46 AM	#466
Reece CINC Pacific Fleet Join Date: Sep 2003 Location: Down Under Posts: 34,802 Downloads: 171 Uploads: 0	THANK YOU, THANK YOU, THANK YOU, THANK YOU DD! __________________ *Sub captains go down with their ship!*

03-19-07, 02:12 AM	#468
Tigrone Commander Join Date: Dec 2001 Location: Newport Beach, CA Posts: 470 Downloads: 41 Uploads: 0	Whoa! Pretty nice. At some point you will have to give it up and accept that it is almost perfect, not to distract you from the pursuit of perfection. __________________ Commander Hiram Cassedy: "Tigrone has saved the Air Force and is now returning to Iwo Jima with 28 rescued zoomies." B-29 SNUFFY & THE SHIF'LESS SKONKS among them. I've a broom at the mast said he, for the broom is a sign for me, that wherever I go, I sweep the mighty sea.

03-19-07, 08:43 AM	#470
Rubini Ocean Warrior Join Date: May 2005 Location: São Paulo Brazil Posts: 2,728 Downloads: 132 Uploads: 0	Thanks DD! Perfect work as always! I also prefer the stock Periscope position because we have an obstructive vision of your awesome work and that office is in it's correct default positions when waiting commands. Thanks mate! Just a question: the GWX hi resolution interior and gauges are also added on this stock position version?:hmm: (i noticed the size of the files, they are so different...) __________________ One gamer's must-have mod is another gamer's waste of time. -Sailor Steve

03-19-07, 09:21 AM	#471
Reece CINC Pacific Fleet Join Date: Sep 2003 Location: Down Under Posts: 34,802 Downloads: 171 Uploads: 0	Yes Rubini, the officer, even with stock, is not in his usual position, must be a problem with the mod that he can't stand near the hatch! I can live with that though! __________________ *Sub captains go down with their ship!*

03-19-07, 07:58 PM	#476
ReallyDedPoet Canadian Wolf Join Date: Jul 2006 Location: Canada. The one and only, East Coast Posts: 10,890 Downloads: 946 Uploads: 5	http://www.subsim.com/radioroom/show...&postcount=473 Should be right at DD post regarding this. Roll Back Commander and be in port wheh doing this. It is JSGME compatible, so if there are problems, uninstall and post issues here Hope this helps. __________________ Back in the Day

03-19-07, 05:37 AM	#469
Kumando Commodore Join Date: Sep 2005 Location: Portugal Posts: 639 Downloads: 283 Uploads: 0	Thanks DD, im looking forward for the correct obs periscope fix

03-19-07, 07:46 PM	#475
CaptainNemo12 Frogman Join Date: Sep 2005 Posts: 307 Downloads: 15 Uploads: 0	About the stock periscope mod, do you install that on top of the Hi-Res mod?

03-19-07, 10:46 PM	#478
Madox58 Stowaway Posts: n/a Downloads: Uploads:	:rotfl: If we add Mick Dundee from the harbor, he could do a walk through! Problem is, he may walk several hundred meters out the front and back of the sub!!! Unless we can find a way to cut his path down. :hmm:

03-20-07, 02:38 AM	#479
Captain Strangelove Mate Join Date: Apr 2005 Location: Landsberg am Lech, Germany Posts: 53 Downloads: 10 Uploads: 0	I can't really explain it, but this fine modification changes SHIII more than I had expected. The sub just seems much more alive and real. You always suspected they were after this closed hatch, but then again it wasn't modeled. And now you can see the dials on the hydrophone moving. Unbe-smeggin'-lievable! Go for the crew room aft of the central, boys! Cheers Kai