SH3 Commander R2.6 NOW AVAILABLE! - Page 17

Laffertytig · 11-02-06, 04:05 AM

this would then affect how long my battery would last right? i like game to be realistic. any ideas jscones?

JScones · 11-02-06, 04:47 AM

Yes, Battery range decreased between 75% & 20% simulating worn out batteries, malfunctioning charging system or e-motors drawing excessive power is modelled.

Laffertytig · 11-02-06, 07:07 AM

ok now im confused. so your sayin that my 11 knot submerged uboat is a sub commander random feature?

JScones · 11-02-06, 05:34 PM

Quote:

Originally Posted by Laffertytig

ok now im confused. so your sayin that my 11 knot submerged uboat is a sub commander random feature?

Ummm, no, malfunctions tend to cripple equipment, not supercharge it. :hmm:

A quick check of the malfunction files shows decreased speed effects modelled only.

Reich · 11-05-06, 07:48 PM

Help! I recently got a new 64 Bit system and SHIII will not run at all, even to install! Can anyone in here offer ANY suggestions as to what I should do next. As I understand it SHIII has a known problem running under Win. XP Home under 64 bit. I am totally out of options here...HELP!!

Church SUBSIM · 11-08-06, 11:21 AM

Question regarding the Map that SubCommander 2.6.1 uses when selecting grid options for your next patrol. Where is the map located and is it possible to change that image? I have a Grid map from ingame that I would like to use.

Thanks!

BTW: Fantastic utility - could not play without it.

JScones · 11-09-06, 02:05 AM

Quote:

Originally Posted by Church SUBSIM

Question regarding the Map that SubCommander 2.6.1 uses when selecting grid options for your next patrol. Where is the map located and is it possible to change that image? I have a Grid map from ingame that I would like to use.

SH3Cmdr Help.html "List of features" reveals all.

Church SUBSIM · 11-09-06, 01:12 PM

<blush>
Ability to view the SH3 Grid Map
Uses SH3_MAP.jpg located in your Silent Hunter III documentation folder. You can replace this file with any map of your choice - just use the same file name;
</blush>

By god, it sure does tell all

Thanks!

kylania · 11-09-06, 01:53 PM

Quote:

Originally Posted by Church SUBSIM

<blush>
Ability to view the SH3 Grid Map
Uses SH3_MAP.jpg located in your Silent Hunter III documentation folder. You can replace this file with any map of your choice - just use the same file name;
</blush>

By god, it sure does tell all

Thanks!

Can you share the map you have Church? I'm always looking for a new grid map.

Thanks!

THE_MASK · 11-19-06, 06:44 PM

Is it possible to have the sh3 folder load into commander instead of my documents folder and then commander delete all but the last save when i roll back commander . I want to play DiD . No will power unfortunately .

It762 · 12-21-09, 07:40 PM

*sigh*

i installed GWX (installer hanged when it wanteed to create the desktop icons) but gwx worked fine. no errors all mods i wanted enabled and then i went on playing.

Then i thought ok sh3 commander is stable, so ill install that to, including the gwx3 config files. I set up my carrier and did not check the historical box as the documentation from gwx suggested.

Now i finished a patrol. And went as the game suggested 5 days after the patrol back. closed sh3, then sh 3 commander seemed to hang... (i enabled roll back on sh3 exit). few hours later i closed sh3 commander and launched it again to try a rollback ... i see a message "copying files but actually harddisk is not working"....

I understand that it's all fan made, but what i dont understand is that there are no error messages i can work with. I don't see what iam doing wrong and then Gwx installer hangs at the end (still ok or not?) then sh3 commander hangs (great now i cannot rollabck to my old version because I dont know what the thing changed...)

Could that be all vista user permissions?

rgds and sorry for the rant - i know that the makers really put a lot of thought time and effort in these tools and they are great, probably iam just to stupid to use them

PS: probably the important thing is now, on how to rollback manually... if that is possible. Backup folder in sh3 commander is empty with the folders data/roster being present...

Magic1111 · 12-22-09, 04:10 AM

Quote:

Originally Posted by It762

*sigh*

i installed GWX (installer hanged when it wanteed to create the desktop icons) but gwx worked fine. no errors all mods i wanted enabled and then i went on playing.

Then i thought ok sh3 commander is stable, so ill install that to, including the gwx3 config files. I set up my carrier and did not check the historical box as the documentation from gwx suggested.

Now i finished a patrol. And went as the game suggested 5 days after the patrol back. closed sh3, then sh 3 commander seemed to hang... (i enabled roll back on sh3 exit). few hours later i closed sh3 commander and launched it again to try a rollback ... i see a message "copying files but actually harddisk is not working"....

I understand that it's all fan made, but what i dont understand is that there are no error messages i can work with. I don't see what iam doing wrong and then Gwx installer hangs at the end (still ok or not?) then sh3 commander hangs (great now i cannot rollabck to my old version because I dont know what the thing changed...)

Could that be all vista user permissions?

rgds and sorry for the rant - i know that the makers really put a lot of thought time and effort in these tools and they are great, probably iam just to stupid to use them

PS: probably the important thing is now, on how to rollback manually... if that is possible. Backup folder in sh3 commander is empty with the folders data/roster being present...

Hi !

Which version of SH3 Commander do you use it? The current version is 3.2!

And why do not write your question in the SH3 Commander 3.2 "Sticky"- Thread here: http://www.subsim.com/radioroom/show...147237&page=12 ?

Best regards,
Magic

It762 · 12-22-09, 04:40 PM

Thanks for your response.
Probably I didn't see it there andyes maybe the other thread would be better.

I reinstalled now all again from admin rights and on a clean folder the gwx installation succeeded without an error the 2nd time. So somewhere I must have done something unexpected before.

Now I have installed SH3 commander (the latest version, I had it before too), but I did not try it out yet. And I am not sure if I should

One question:
In stock sh3 when I start the "diesel" engines (1/3 ahead etc) I hear them clearly. When GWX is installed I hear them only in the "outside" view. As I said I did not tinker with the TC settings this time and the previous "SH3 own document files" were deleted.

I will check also the SH3 cmdr. thread for infos

Thanks again!

11-05-06, 07:48 PM	#245
Reich Nub Join Date: Nov 2006 Posts: 2 Downloads: 0 Uploads: 0	64 Bit Patch for SH III?? Help! I recently got a new 64 Bit system and SHIII will not run at all, even to install! Can anyone in here offer ANY suggestions as to what I should do next. As I understand it SHIII has a known problem running under Win. XP Home under 64 bit. I am totally out of options here...HELP!!

11-08-06, 11:21 AM	#246
Church SUBSIM Weps Join Date: Feb 2004 Posts: 353 Downloads: 121 Uploads: 4	Question regarding the Map that SubCommander 2.6.1 uses when selecting grid options for your next patrol. Where is the map located and is it possible to change that image? I have a Grid map from ingame that I would like to use. Thanks! BTW: Fantastic utility - could not play without it. __________________

11-09-06, 01:12 PM	#248
Church SUBSIM Weps Join Date: Feb 2004 Posts: 353 Downloads: 121 Uploads: 4	<blush> Ability to view the SH3 Grid Map Uses SH3_MAP.jpg located in your Silent Hunter III documentation folder. You can replace this file with any map of your choice - just use the same file name; </blush> By god, it sure does tell all Thanks! __________________

11-02-06, 04:05 AM	#241
Laffertytig Grey Wolf Join Date: Feb 2003 Posts: 757 Downloads: 110 Uploads: 0	this would then affect how long my battery would last right? i like game to be realistic. any ideas jscones?

11-02-06, 04:47 AM	#242
JScones Navy Seal Join Date: Apr 2005 Posts: 5,501 Downloads: 19 Uploads: 0	Yes, Battery range decreased between 75% & 20% simulating worn out batteries, malfunctioning charging system or e-motors drawing excessive power is modelled.

11-02-06, 07:07 AM	#243
Laffertytig Grey Wolf Join Date: Feb 2003 Posts: 757 Downloads: 110 Uploads: 0	ok now im confused. so your sayin that my 11 knot submerged uboat is a sub commander random feature?

11-19-06, 06:44 PM	#250
THE_MASK Ace of the deep . Join Date: Jan 2006 Posts: 9,226 Downloads: 901 Uploads: 73	Is it possible to have the sh3 folder load into commander instead of my documents folder and then commander delete all but the last save when i roll back commander . I want to play DiD . No will power unfortunately .

12-21-09, 07:40 PM	#251
It762 Gunner Join Date: May 2005 Posts: 97 Downloads: 3 Uploads: 0	sigh i installed GWX (installer hanged when it wanteed to create the desktop icons) but gwx worked fine. no errors all mods i wanted enabled and then i went on playing. Then i thought ok sh3 commander is stable, so ill install that to, including the gwx3 config files. I set up my carrier and did not check the historical box as the documentation from gwx suggested. Now i finished a patrol. And went as the game suggested 5 days after the patrol back. closed sh3, then sh 3 commander seemed to hang... (i enabled roll back on sh3 exit). few hours later i closed sh3 commander and launched it again to try a rollback ... i see a message "copying files but actually harddisk is not working".... I understand that it's all fan made, but what i dont understand is that there are no error messages i can work with. I don't see what iam doing wrong and then Gwx installer hangs at the end (still ok or not?) then sh3 commander hangs (great now i cannot rollabck to my old version because I dont know what the thing changed...) Could that be all vista user permissions? rgds and sorry for the rant - i know that the makers really put a lot of thought time and effort in these tools and they are great, probably iam just to stupid to use them PS: probably the important thing is now, on how to rollback manually... if that is possible. Backup folder in sh3 commander is empty with the folders data/roster being present...

12-22-09, 04:40 PM	#253
It762 Gunner Join Date: May 2005 Posts: 97 Downloads: 3 Uploads: 0	Thanks for your response. Probably I didn't see it there andyes maybe the other thread would be better. I reinstalled now all again from admin rights and on a clean folder the gwx installation succeeded without an error the 2nd time. So somewhere I must have done something unexpected before. Now I have installed SH3 commander (the latest version, I had it before too), but I did not try it out yet. And I am not sure if I should One question: In stock sh3 when I start the "diesel" engines (1/3 ahead etc) I hear them clearly. When GWX is installed I hear them only in the "outside" view. As I said I did not tinker with the TC settings this time and the previous "SH3 own document files" were deleted. I will check also the SH3 cmdr. thread for infos Thanks again!