[REL] Toyotagt86's Enhanced mod for GWX3.0 - Page 15

Mad Mardigan · 01-26-22, 01:45 PM

Quote:

Originally Posted by tonschk

Hi, please can you help?, my 20" monitor show the resolutions I paste below, I unsuccessfully try to install Toyotagt86 ARB WideGui 1920x1080 version which show error "Can Not Initialize 3D engine" then I swap with WAC MaGui for GWXv3 - 1366x768 and show the same error "Can Not Initialize 3D engine", I on both versions open the SH3 folder and locate these 3 executables, the SH3.exe, Cmdr.exe (located in the SH3/ Commander’s Folder) and the JSGME.exe and changed each executable by right clicking and select their Properties / Compatibilities to WIN7 compatibly / and run as ADMIN. The GWX v3 mod is working fine just by reducing the resolution from 1680x1050, thank you

1680x1050
1280x1024
1152x864
1024x768
800x600

If your graphics card has it included... should be able to go into it's control panel & set up a custom rez size... say... 1920x1080 (I think's 1 of the larger sized rez options for ws mods...

) or... 1360x768 or was that 1366x786.... 1 or the other of them.

My screen is 16x9... & that 1920 or 1980 WS mode...was kaputsky... meaning for Me... it wouldn't work & when I went to do the initial set up a bit back... I also got that bloody "can't initialize 3D engine garbage.

After I popped in the MaGui 13X7 WS mod in... the whole set up, ran like a champ, after that...

Main point is... to get set up to begin with... resize your screen... to 1920.. 1980, whatever that size is again... then run set up from there. Once done, can always reset the rez for the monitor back to native & use that MaGui WS 13x7... that worked the way I outlined here... for Me.

Hope that helps.. & I didn't leave ya scratching your head, going "sayyyy whaaa...???"

M. M.

Anvar1061 · 01-26-22, 02:29 PM

Quote:

Originally Posted by ericlea

Hi !

On the periscope, when you select a ship with L, it is not like usual: there is absolutely no summary indication concerning this ship (warship, merchant ship, tanker...).
One is obliged to identify it in order to know everything in detail.

I don't know if it's intentional but I don't think so is it ?

Thanks

Commands_**.cfg
[Cmd343]
Name=WP_Identify_target
Ctxt=1
MnID=0x3F130002
Str=1073
Key0=0x4c,Cs,"Shift+L"

[Cmd344]
Name=WP_Solution_to_target
Ctxt=1
MnID=0x3F130003
Str=1074
Key0=0x4c,Cc,"Ctl+L"

ericlea · 01-27-22, 08:34 AM

thanks anvart i know this but it is not what i mean.
normally by passing a ship in the viewfinder (or at least by locking it with L) without having identified it, the game tells us if it is a warship, or a merchant ship or a tanker...

...

tonschk · 01-27-22, 11:23 AM

Quote:

Originally Posted by Mad Mardigan

If your graphics card has it included... should be able to go into it's control panel & set up a custom rez size... say... 1920x1080 (I think's 1 of the larger sized rez options for ws mods...

) or... 1360x768 or was that 1366x786.... 1 or the other of them.

My screen is 16x9... & that 1920 or 1980 WS mode...was kaputsky... meaning for Me... it wouldn't work & when I went to do the initial set up a bit back... I also got that bloody "can't initialize 3D engine garbage.

After I popped in the MaGui 13X7 WS mod in... the whole set up, ran like a champ, after that...

Main point is... to get set up to begin with... resize your screen... to 1920.. 1980, whatever that size is again... then run set up from there. Once done, can always reset the rez for the monitor back to native & use that MaGui WS 13x7... that worked the way I outlined here... for Me.

Hope that helps.. & I didn't leave ya scratching your head, going "sayyyy whaaa...???"

M. M.

Hi, thank you very much for the help, I was using the nvidia control panel to customize and change the resolution to MaGui GWXv3 - 1366x768 and the game was able to run the introduction with the MaGui GWXv3 - 1366x768 logo after that and just to try I choose one single mission and after the horizontal red bar start to fill and move to the right reaching about 95% of total then the computer went frozen, I then switch off the PC and try again to run the game but unfortunatly happen exact again the same and the PC was frozen when the horizontal red bar was about 95% of full, I have no clue what I did wrong

ARB WideGui 1920x1080:

Anvar1061 · 01-27-22, 12:59 PM

Quote:

Originally Posted by ericlea

thanks anvart i know this but it is not what i mean.
normally by passing a ship in the viewfinder (or at least by locking it with L) without having identified it, the game tells us if it is a warship, or a merchant ship or a tanker...

...

Compare these files.
data\Roster\French.cfg English.cfg & German.cfg
Maybe you are looking for it?

Anvar1061 · 01-27-22, 01:01 PM

Quote:

Originally Posted by tonschk

PC was frozen when the horizontal red bar was about 95% of full,

You have to wait a long time.

ericlea · 01-27-22, 01:09 PM

Quote:

Originally Posted by Anvar1061

Compare these files.
data\Roster\French.cfg English.cfg & German.cfg
Maybe you are looking for it?

Hi !

Thanks Anvart ! English.cfg & German.cfg are empty I understand now

tonschk · 01-27-22, 01:37 PM

Quote:

Originally Posted by Anvar1061

You have to wait a long time.

Ok, thank you, going to try once more now

Anvar1061 · 01-27-22, 02:34 PM

Quote:

Originally Posted by ericlea

Hi !

Thanks Anvart ! English.cfg & German.cfg are empty I understand now

Quote:

Originally Posted by tonschk

Ok, thank you, going to try once more now

Doolar · 01-27-22, 02:34 PM

on a new career and before the 1st patrol, I can expect to wait sometimes 12+ minutes for SHIII to start the game.

John Pancoast · 01-27-22, 02:59 PM

Quote:

Originally Posted by Doolar

on a new career and before the 1st patrol, I can expect to wait sometimes 12+ minutes for SHIII to start the game.

FUBAR295 · 01-27-22, 03:47 PM

WAC, LSH3 and CCoM have extended load times.

WAC is the worst offender in this respect being 15 to 20 minutes start to finish on the loading process, at least on my machine. NYGM and GWX being the quickest with about 5 minutes give or take.

tonschk · 01-28-22, 11:50 AM

Quote:

Originally Posted by Anvar1061

You have to wait a long time.

Yes is working but I think the loading process take by at least 20 minutes and probably more about 25, thank you very much for advice

Anvar1061 · 01-28-22, 01:48 PM

Quote:

Originally Posted by tonschk

Yes is working but I think the loading process take by at least 20 minutes and probably more about 25, thank you very much for advice

Kumando · 03-28-22, 02:56 AM

Quote:

Originally Posted by Anvar1061

@Toyotagt86
Ask me how and I will do better!

Wich mod has that kriegsmarine black shirt and that white wool one?

01-27-22, 08:34 AM	#213
ericlea Samurai Navy Join Date: Jan 2014 Location: Strasbourg F Posts: 572 Downloads: 109 Uploads: 0	thanks anvart i know this but it is not what i mean. normally by passing a ship in the viewfinder (or at least by locking it with L) without having identified it, the game tells us if it is a warship, or a merchant ship or a tanker... ... __________________ SH3 CCOM12 (+Fifi 2021) Installation Tuto SH3 GWXonealex (2021) Installation Tuto SH3 WAC5.2 (2019) Installation Tuto

01-27-22, 02:34 PM	#220
Doolar Expert Shipsinker Join Date: Feb 2007 Location: Baltimore,Md./ CA45 Posts: 919 Downloads: 360 Uploads: 0	re on a new career and before the 1st patrol, I can expect to wait sometimes 12+ minutes for SHIII to start the game. __________________ ONEALEX 1.53 ARB / NYGM "ENHANCED Steel Coffin Edition" v7.8 DGUI / CCom12 DGUI / WAC 5.2 DGUI / Toyotagt86 v2.3 ARB / GWX3 DGUI / GWX Knight's Cross v1

01-27-22, 03:47 PM	#222
FUBAR295 Krusty Krab Join Date: Mar 2002 Location: Decks awash in the North Atlantic Posts: 1,452 Downloads: 493 Uploads: 0	WAC, LSH3 and CCoM have extended load times. WAC is the worst offender in this respect being 15 to 20 minutes start to finish on the loading process, at least on my machine. NYGM and GWX being the quickest with about 5 minutes give or take. __________________ Good judgment comes from experience. Unfortunately, the experience usually comes from bad judgment.