ARB WideGui 1920x1080

Fubar2Niner · 03-27-20, 04:17 PM

@KaleuBauman

Ok try this,

Go to your SH3.exe and right click, select compatibility.

I presume you are running in win 7 mode? And as admin ?

Click the 'Change high DPI settings' put a check in the High DPI scaling override box and ok.

Put a check in the Disable full screen optimisations box apply and ok.

check it out, any better mate?

KaleuBauman · 03-27-20, 08:46 PM

Quote:

Originally Posted by Fubar2Niner

@KaleuBauman

Ok try this,

Go to your SH3.exe and right click, select compatibility.

I presume you are running in win 7 mode? And as admin ?

Click the 'Change high DPI settings' put a check in the High DPI scaling override box and ok.

Put a check in the Disable full screen optimisations box apply and ok.

check it out, any better mate?

Zero change. Incredibly confused by this -- I had set this up identically two or three days ago, and everything was running fine.

Fifi · 03-28-20, 01:34 AM

On side note, windows 10 can be sometimes ... very weird, with strange things happening

Experienced few times, and lately with my AA suddenly going off randomly on the global scene image but not the gui!

...and since few days, it’s gone and all well...go figure.
Wondering if this damn actual virus is for something

Kpt. Lehmann · 03-28-20, 01:46 PM

Quote:

Originally Posted by Fifi

On side note, windows 10 can be sometimes ... very weird, with strange things happening

Experienced few times, and lately with my AA suddenly going off randomly on the global scene image but not the gui!

...and since few days, it’s gone and all well...go figure.
Wondering if this damn actual virus is for something

Good shipmate, Windows 10 is a PIG with LIPSTICK! I also feel partly the same about NVIDIA these days.

Or, maybe I'm just getting old.

That is all. Carry on.

Fubar2Niner · 03-28-20, 05:23 AM

Quote:

Originally Posted by KaleuBauman

Zero change. Incredibly confused by this -- I had set this up identically two or three days ago, and everything was running fine.

Out of curiosity, mate. What is your win 10 build number?

I had this same thing quite some time ago. Now all is well, FYI my build no. is;

version 1909
build 18363.720

KaleuBauman · 03-28-20, 12:09 PM

Quote:

Originally Posted by Fubar2Niner

Out of curiosity, mate. What is your win 10 build number?

I had this same thing quite some time ago. Now all is well, FYI my build no. is;

version 1909
build 18363.720

Did have a Windows update.

Fresh install, repatched/installed everything.

Still in 1024x768

KaleuBauman · 03-28-20, 01:16 PM

Well, some progress. I have the game running full screen, but when I launch a mission, rather than getting "Not so long ago..." or whatever the usual launch screen text is, I get "Initializing." The usual controls come up at the bottom of the screen, but the game says it's paused and none of the controls actually work.

Anyone encountered this before?

KaleuBauman · 04-01-20, 03:22 PM

Quote:

Originally Posted by KaleuBauman

Well, some progress. I have the game running full screen, but when I launch a mission, rather than getting "Not so long ago..." or whatever the usual launch screen text is, I get "Initializing." The usual controls come up at the bottom of the screen, but the game says it's paused and none of the controls actually work.

Anyone encountered this before?

Just a bump to see if anyone has any ideas on this issue.

3catcircus · 04-05-20, 01:06 PM

So I've re-discovered gameplay in SH3 GWX - ARB's 1920x1080 is the only widescreen mod that I can get to display on my entire screen (MaGUI, Ahnenerbe are both great mods too, they just won't fill my whole screen).

Couple of questions regarding using this mod. My mod list as follows:

GWX - Alternative Flotillas
GWX - Axis Mediterranean Aircraft Skins
GWX - Enhanced Damage Effects
GWX - Late War Sensors Snorkel Antennas
GWX - Merged Campaign
GWX - No Medals on Crew
GWX Turm Lights fix
OLC's Modified Searchlight Beams for GWX3
Torpedo damage Final ver2.0
M.E.P v6
Optional - FSF for MEP v6
Optional - ShipVanishingHull for MEP v6
M.E.P v6- VisualSensors for GWX3
Waterstream+Exhaust Combi V2.3 for GWX3
Waterstream+Exhaust Combi - Single Exhaust for TypeII
Tribal Class Mod
Southampton and Fiji
Dido Class
Hunt I-III
A_to_I_class_mod
J to Z Class Mod
J_to_Z_Class_visual_fix
Torpedo_HAHD_1024_GWX
TMT v2 with EFS (GWX3 version)
Convoy-Routes on Map - BL!TZKR!EG Edition
LifeBoats&Debris_v4
GWX 3 Wilhemshafen,St Naz,Schluese and xtra ships V7
WAC4.1 SubPen_animated_18.02.2010
New Lorient v1 - GWX3 Merged Campaign+Wilhelmshafen_et_al_V7
Q Ship mod GWX3.0
GWX_DFa-Flag&Pens_2010
TKSS18 German U-Boats Compilation No Eagle
New U-Boat Guns Fixed Reworked (for German U-Boats Compilation)
German U-Boats Compilation FuMO_Fix_SNS
German U-Boats Compilation 2 (only VIIB & VIIC models by WISE)
FixAllSubGWX
TheDarkWraith_Ship_Plane_Fire_Damage_v1_4_SH3
Conus' Historically Accurate U-boat Emblems 1.0
Conus' Historically Accurate U-boat Emblems 1.1
Conus' Historically Accurate U-boat Emblems 1.2
Conus' Historically Accurate U-boat Emblems 1.3
Destroyers&Corvette
Thomsen's Sound Pack V3.2cg
Evan82's Uniforms II
ARB WideGui 1920x1080
Color Dials with Dark Compass
Adaptation for English & Deutsch
ARB WideGUI 1920 x 1080 v0.3.1 HotFix
MFM-Improved (v3.3)
MFM v3.3 Silhouettes by Izgud
Ship Names
S3H-H.sie-Patch-V16B1
MFM-v3-US+UK_Skins19390901

1. How much zoom is the attack scope supposed to go to? I have 1.5x and 6x. Is there a 12x? Should I be able to CTRL-mousewheel to zoom or just normal mousewheel and two zoom levels?
2. I assume the observation scope has the same zoom levels?
3. When using the RAOBF wheel, I'm consistently getting incorrect ranges and AOBs. What zoom level should I be using? How many horizontal tick marks should I be counting when determining AOB (i.e. do I need to double the count or not)?
4. When opening up the RAOBF, it defaults to selecting an AOB on the scratchpad. Is the RAOBF in this mod designed to *just* do AOBs? Or can I line up the quantity of vertical ticks to 90 degrees and read off the range at the point where it lines up with the mast height? I see no other way of entering a range into the scratchpad other than using the stadimeter.
5. An ideas if using Tribute to Manual targeting followed by the MFM and Izgud's new silhouettes could be throwing off my measurements? I note that most of the silhouettes are missing reference marks to indicate whether the mast or the funnel is the intended reference height.
6. What's the division of the tick marks on the UZO to determine range? Likewise on the scopes? Does it work out to be H * 50/ticks (x1.5) or H * 200/ticks (6x) to give a rough estimate of range?

03-28-20, 01:34 AM	#3
Fifi Navy Seal Join Date: Dec 2012 Location: France Posts: 5,811 Downloads: 457 Uploads: 0	On side note, windows 10 can be sometimes ... very weird, with strange things happening Experienced few times, and lately with my AA suddenly going off randomly on the global scene image but not the gui! ...and since few days, it’s gone and all well...go figure. Wondering if this damn actual virus is for something __________________ https://www.mediafire.com/file/x0uu8...N_V6.2.7z/file

04-05-20, 01:06 PM	#9
3catcircus Grey Wolf Join Date: Sep 2011 Posts: 955 Downloads: 247 Uploads: 0	Rediscovering SH3 with this GUI Mod So I've re-discovered gameplay in SH3 GWX - ARB's 1920x1080 is the only widescreen mod that I can get to display on my entire screen (MaGUI, Ahnenerbe are both great mods too, they just won't fill my whole screen). Couple of questions regarding using this mod. My mod list as follows: GWX - Alternative Flotillas GWX - Axis Mediterranean Aircraft Skins GWX - Enhanced Damage Effects GWX - Late War Sensors Snorkel Antennas GWX - Merged Campaign GWX - No Medals on Crew GWX Turm Lights fix OLC's Modified Searchlight Beams for GWX3 Torpedo damage Final ver2.0 M.E.P v6 Optional - FSF for MEP v6 Optional - ShipVanishingHull for MEP v6 M.E.P v6- VisualSensors for GWX3 Waterstream+Exhaust Combi V2.3 for GWX3 Waterstream+Exhaust Combi - Single Exhaust for TypeII Tribal Class Mod Southampton and Fiji Dido Class Hunt I-III A_to_I_class_mod J to Z Class Mod J_to_Z_Class_visual_fix Torpedo_HAHD_1024_GWX TMT v2 with EFS (GWX3 version) Convoy-Routes on Map - BL!TZKR!EG Edition LifeBoats&Debris_v4 GWX 3 Wilhemshafen,St Naz,Schluese and xtra ships V7 WAC4.1 SubPen_animated_18.02.2010 New Lorient v1 - GWX3 Merged Campaign+Wilhelmshafen_et_al_V7 Q Ship mod GWX3.0 GWX_DFa-Flag&Pens_2010 TKSS18 German U-Boats Compilation No Eagle New U-Boat Guns Fixed Reworked (for German U-Boats Compilation) German U-Boats Compilation FuMO_Fix_SNS German U-Boats Compilation 2 (only VIIB & VIIC models by WISE) FixAllSubGWX TheDarkWraith_Ship_Plane_Fire_Damage_v1_4_SH3 Conus' Historically Accurate U-boat Emblems 1.0 Conus' Historically Accurate U-boat Emblems 1.1 Conus' Historically Accurate U-boat Emblems 1.2 Conus' Historically Accurate U-boat Emblems 1.3 Destroyers&Corvette Thomsen's Sound Pack V3.2cg Evan82's Uniforms II ARB WideGui 1920x1080 Color Dials with Dark Compass Adaptation for English & Deutsch ARB WideGUI 1920 x 1080 v0.3.1 HotFix MFM-Improved (v3.3) MFM v3.3 Silhouettes by Izgud Ship Names S3H-H.sie-Patch-V16B1 MFM-v3-US+UK_Skins19390901 1. How much zoom is the attack scope supposed to go to? I have 1.5x and 6x. Is there a 12x? Should I be able to CTRL-mousewheel to zoom or just normal mousewheel and two zoom levels? 2. I assume the observation scope has the same zoom levels? 3. When using the RAOBF wheel, I'm consistently getting incorrect ranges and AOBs. What zoom level should I be using? How many horizontal tick marks should I be counting when determining AOB (i.e. do I need to double the count or not)? 4. When opening up the RAOBF, it defaults to selecting an AOB on the scratchpad. Is the RAOBF in this mod designed to just do AOBs? Or can I line up the quantity of vertical ticks to 90 degrees and read off the range at the point where it lines up with the mast height? I see no other way of entering a range into the scratchpad other than using the stadimeter. 5. An ideas if using Tribute to Manual targeting followed by the MFM and Izgud's new silhouettes could be throwing off my measurements? I note that most of the silhouettes are missing reference marks to indicate whether the mast or the funnel is the intended reference height. 6. What's the division of the tick marks on the UZO to determine range? Likewise on the scopes? Does it work out to be H * 50/ticks (x1.5) or H * 200/ticks (6x) to give a rough estimate of range? Last edited by 3catcircus; 04-07-20 at 11:56 AM.

03-27-20, 04:17 PM	#1
Fubar2Niner Silent Hunter Join Date: Nov 2002 Location: London. UK Posts: 4,139 Downloads: 276 Uploads: 0	@KaleuBauman Ok try this, Go to your SH3.exe and right click, select compatibility. I presume you are running in win 7 mode? And as admin ? Click the 'Change high DPI settings' put a check in the High DPI scaling override box and ok. Put a check in the Disable full screen optimisations box apply and ok. check it out, any better mate?

03-28-20, 01:16 PM	#7
KaleuBauman Seaman Join Date: Jun 2005 Location: Minnesota Posts: 37 Downloads: 55 Uploads: 0	Well, some progress. I have the game running full screen, but when I launch a mission, rather than getting "Not so long ago..." or whatever the usual launch screen text is, I get "Initializing." The usual controls come up at the bottom of the screen, but the game says it's paused and none of the controls actually work. Anyone encountered this before?