![]() |
SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997 |
![]() |
#1 |
Seaman
![]() Join Date: May 2012
Posts: 39
Downloads: 9
Uploads: 0
|
![]()
With the blessings of the High Admirality i'm selling an almost complete Attack Wheel with acrylic aid. EDIT: Now also with an RaobF
https://www.etsy.com/uk/shop/wellpla...platform-mcnav ![]() ![]() ![]() Materials used: Maple Veneer 3mm, Acrylic Clear Glass engraved with a VII blueprint, 0.3mm Cutout to read out readings on the acrylic aid. I might add a cheaper version without the Acrylic Aid depending on the feedback, i might add a video on how to operate it, but it works like a classic Attackdisk. I use it currently in Wolfpack to calculate AoB and converting relatives / absolutes. Last edited by Lancezh; 04-12-19 at 12:58 PM. |
![]() |
![]() |
![]() |
#2 |
Fleet Admiral
![]() |
![]()
Best of luck to you in your Etsy business!!!
The good news is that you probably won't have a lot of competition. ![]()
__________________
abusus non tollit usum - A right should NOT be withheld from people on the basis that some tend to abuse that right. |
![]() |
![]() |
![]() |
#3 |
Seaman
![]() Join Date: May 2012
Posts: 39
Downloads: 9
Uploads: 0
|
![]()
And also not alot of customers =)) The next step is a usable RaoBF, but step by step i guess.
|
![]() |
![]() |
![]() |
#4 |
Bosun
![]() Join Date: Jun 2013
Posts: 66
Downloads: 66
Uploads: 0
|
![]()
I ordered the disk yesterday...
Cystriker |
![]() |
![]() |
![]() |
#5 |
Bosun
![]() Join Date: Jun 2013
Posts: 66
Downloads: 66
Uploads: 0
|
![]()
I found my duplicate photo copies of the three disks for the attack wheel.... I think what I did to make the first one ... a long time ago...was take the images to a print shop and have them photo copy of heavy white stock... then I cut the three circles to fit:<) not as pretty as your item but it also will work:<) Also/.... forgot how to use it:<)
Roland / CyStriker Last edited by rolandslaw; 04-06-19 at 09:01 PM. |
![]() |
![]() |
![]() |
#6 |
Bilge Rat
![]() Join Date: Sep 2007
Posts: 1
Downloads: 14
Uploads: 0
|
![]()
I just received the wooden one, great stuff, really happy with it!
![]() |
![]() |
![]() |
![]() |
#7 |
Seaman
![]() Join Date: May 2012
Posts: 39
Downloads: 9
Uploads: 0
|
![]() |
![]() |
![]() |
![]() |
#8 |
Bosun
![]() Join Date: Jun 2013
Posts: 66
Downloads: 66
Uploads: 0
|
![]()
Gents:
I received the disc and it is great work. I did modify it for my preferences. I created back plates which allow me to pick up the disk without the parts coming apart. I used hard foam board and thin very slick paper sheet. I mounted the second wheel on a foam board cut out underlying the outer wheel.... I cut a foam board mount for the outer wheel... glued to the lower board.... I placed a #10 brass bolt... through the center replacing the provided pin ... used a washer on top and at the bottom with a nut... Now the center disk and middle disk are held in place. The outer wheel is glued in place......... the center and middle disk rotate easily. I am lookng for my other templates ... in color... I had them.. I want to rebuild with hard paper ... Roland CyStriker |
![]() |
![]() |
![]() |
|
|