T34 vs Tiger game crashing

ZeeWolf · 12-20-09, 09:30 PM

Quote:

Originally Posted by rowdied

Hello,

Thanks for the quick reply. I should have mentioned i've already done this.

It only happens when im looking through the gunners scope or when im looking through binocs or slit in the commanders cuppola. If i'm in 3rd person view, i dont crash when my tank gets hit. It drives me nuts! I know the game has problems but after every hit like this i have to restart my computer. Makes it hard to complete missions unless i let the computer shoot and hit while i'm in 3rd person. It also did this with my old evga geforce gtx 260 card. I'm starting to think it has to do with intel c2duos.

Are you overclocking?

rowdied · 12-20-09, 11:04 PM

Quote:

Originally Posted by ZeeWolf

Are you overclocking?

Not with my videocard, but it doesn't matter because it crashes with or without o.c. for processor.
The blue screen error points to memory and/or new component added.
stop error: 0x000000000007f
This is the only game or app where i experience any problems.
Did this game not experience memory leakage causing crashing?
This only happens when looking through a scope or binocs or a slit viewsight buttoned up in the tank. Tried different settings invince or not high or low and even windowed and same blue screen.
Makes it hard to play.

ZeeWolf · 12-20-09, 11:25 PM

Quote:

Originally Posted by rowdied

Not with my videocard, but it doesn't matter because it crashes with or without o.c. for processor.
The blue screen error points to memory and/or new component added.
stop error: 0x000000000007f
This is the only game or app where i experience any problems.
Did this game not experience memory leakage causing crashing?
This only happens when looking through a scope or binocs or a slit viewsight buttoned up in the tank. Tried different settings invince or not high or low and even windowed and same blue screen.
Makes it hard to play.

Just a guess but the views you have problems with are the views that use an alfa DDS file (32bit 8A8R8G8B )that is unique to those views only. My be your videocard, or ist's settings when it comes to overlay. Just guessing though.

ZeeWolf

Sledgehammer427 · 12-21-09, 01:15 AM

I thought that error code looked awfully familiar.
(http://www.subsim.com/radioroom/arch.../t-147585.html)
This was from way back when I tried to play Steel Fury and it would BSOD on me at random times. It turns out that my processor didn't have the proper instructions (it says that it requires SSE instructions to run properly in the manual) not the mismatched memory I thought it was in that post.

But rowdied, I assure you it's not your processor, I run a c2duo on my machine and it has no problems at all.
I'm no computer tech but I hope I helped you figure this out in some way.
Have you tried reinstalling it? You never know if something may have been corrupted in your install.

Mikhayl · 12-21-09, 05:08 AM

You can try the unofficial patch: http://rapidshare.com/files/236418207/patchTvsT_v_1.zip

Also, just out of curiosity, can you check the date of your TvsT.exe? Mine is August 1 2008. I don't remember where but I've read that there are 2 different versions of the game on the market and one (older) has problems, not sure if it's true or what.

hodi · 12-21-09, 11:49 AM

long time ago i read something about a sound bug in the Lighthouse Forum

maybe you need to update your sound-drivers or
eventually you need to switch off sound hardware acceleration

This is how to do (translated by google

)

Typing Start-> Run-> dxdiag

On the Sound tab, the current sound settings are displayed, and you can test DirectSound.

The slider for setting the sound hardware acceleration is used to correct audio glitches that might be caused by some audio drivers. The best way to troubleshoot DirectSound audio problems is to reduce the acceleration by one notch and re-testing the application. Lowering the Hardware Sound Acceleration Level from the default "full acceleration" may lead to non-functioning of advanced audio processing techniques such as 3D spatialization.

rowdied · 12-22-09, 12:20 AM

Quote:

Originally Posted by hodi

long time ago i read something about a sound bug in the Lighthouse Forum

maybe you need to update your sound-drivers or
eventually you need to switch off sound hardware acceleration

This is how to do (translated by google

)

Typing Start-> Run-> dxdiag

On the Sound tab, the current sound settings are displayed, and you can test DirectSound.

The slider for setting the sound hardware acceleration is used to correct audio glitches that might be caused by some audio drivers. The best way to troubleshoot DirectSound audio problems is to reduce the acceleration by one notch and re-testing the application. Lowering the Hardware Sound Acceleration Level from the default "full acceleration" may lead to non-functioning of advanced audio processing techniques such as 3D spatialization.

Hello and thanks for the hints.

I installed this on my other system Q6600 o'c to 3.2 with 4 gb ram the gtx260 vid card and have no crashes. It must be related to my mem or motherboard. funny, this is the only game that crashes my sytem.
Thanks for all the help, i'm goina play it on the other one instead.

12-21-09, 01:15 AM	#4
Sledgehammer427 PacWagon Join Date: Jun 2007 Location: Drinking coffee and staring at trees in Massachusetts Posts: 2,908 Downloads: 287 Uploads: 0	I thought that error code looked awfully familiar. (http://www.subsim.com/radioroom/arch.../t-147585.html) This was from way back when I tried to play Steel Fury and it would BSOD on me at random times. It turns out that my processor didn't have the proper instructions (it says that it requires SSE instructions to run properly in the manual) not the mismatched memory I thought it was in that post. But rowdied, I assure you it's not your processor, I run a c2duo on my machine and it has no problems at all. I'm no computer tech but I hope I helped you figure this out in some way. Have you tried reinstalling it? You never know if something may have been corrupted in your install. __________________ Cold Waters Voice Crew - Fire Control Officer Cmdr O. Myers - C/O USS Nautilus (SS-168) 114,000 tons sunk - 4 Spec Ops completed V-boat Nutcase - Need supplies? Japanese garrison on a small island in the way? Just give us a call! D4C!

12-21-09, 11:49 AM	#6
hodi Watch Join Date: Nov 2009 Location: germany Posts: 30 Downloads: 0 Uploads: 0	long time ago i read something about a sound bug in the Lighthouse Forum maybe you need to update your sound-drivers or eventually you need to switch off sound hardware acceleration This is how to do (translated by google) Typing Start-> Run-> dxdiag On the Sound tab, the current sound settings are displayed, and you can test DirectSound. The slider for setting the sound hardware acceleration is used to correct audio glitches that might be caused by some audio drivers. The best way to troubleshoot DirectSound audio problems is to reduce the acceleration by one notch and re-testing the application. Lowering the Hardware Sound Acceleration Level from the default "full acceleration" may lead to non-functioning of advanced audio processing techniques such as 3D spatialization.

12-21-09, 05:08 AM	#5
Mikhayl Captain Join Date: Dec 2007 Posts: 485 Downloads: 64 Uploads: 0	You can try the unofficial patch: http://rapidshare.com/files/236418207/patchTvsT_v_1.zip Also, just out of curiosity, can you check the date of your TvsT.exe? Mine is August 1 2008. I don't remember where but I've read that there are 2 different versions of the game on the market and one (older) has problems, not sure if it's true or what.