JonZ Improved Recognition Manual Released ! (v1.1)(16-04-06) - Page 4

Hitch · 04-09-06, 12:20 PM

Ha! I was right in the middle of writing you to tell you I'd found the problem as well! :rotfl: :rotfl: :rotfl: :rotfl:

Thanks for the update!

Hitch

04-09-06, 12:23 PM

Quote:

Originally Posted by Hitch

Ha! I was right in the middle of writing you to tell you I'd found the problem as well! :rotfl: :rotfl: :rotfl: :rotfl:

Thanks for the update!

Hitch

The version I uploaded is with the German fix if you're interested :|\

JonZ

Hitch · 04-09-06, 12:43 PM

JonZ,

I'm not seeing any difference. The "culprit" I found earlier was that the menu_1024_768.ini contain references to two files which are not included:

recmancover2.tga and RecManBkgr2.tga.

Hope this helps!

Hitch

ADukes · 04-09-06, 02:30 PM

Quote:

Originally Posted by Hitch

JonZ,

I'm not seeing any difference. The "culprit" I found earlier was that the menu_1024_768.ini contain references to two files which are not included:

recmancover2.tga and RecManBkgr2.tga.

Hope this helps!

Hitch

The entries in the menu.ini and both tgas are not part of Jon's mod.
So you did something wrong.

Hitch · 04-09-06, 03:26 PM

Quote:

Originally Posted by ADukes

The entries in the menu.ini and both tgas are not part of Jon's mod.
So you did something wrong.

You mean these entries in the menu_1024_768.ini?

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; JonZ Large Recognition Manual ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

[G25 I4]
Name=Next
Type=1032;Button
ItemID=0x25050004
ParentID=0x25050000
Pos=309,-162,83,36
Color=0xFFFFFFFF
Materials=4
Display=2;Linear
Mat 0=data/menu/gui/recmanual/icons.tga
Crop 0=0.9375,0,0.0625,0.015625
Mat 1=data/menu/gui/recmanual/icons.tga
Crop 1=0.9375,0,0.0625,0.015625
Mat 2=data/menu/gui/recmanual/icons.tga
Crop 2=0.9375,0,0.0625,0.015625
Mat 3=data/menu/gui/recmanual/recmancover2.tga
Crop 3=0.8671875,0,0.0810546875,0.0703125
MatFlags=0x1
TexFmt=0x9
StatesColors=0xB0B0B0FF, 0xFF, 0xFFFFFFFF, 0xFFFFFFFF

[G25 I5]
Name=Previous
Type=1032;Button
ItemID=0x25050003
ParentID=0x25050000
Pos=226,-162,83,36
Color=0xFFFFFFFF
Materials=4
Display=2;Linear
Mat 0=data/menu/gui/recmanual/icons.tga
Crop 0=0.9375,0,0.0625,0.015625
Mat 1=data/menu/gui/recmanual/icons.tga
Crop 1=0.9375,0,0.0625,0.015625
Mat 2=data/menu/gui/recmanual/icons.tga
Crop 2=0.9375,0,0.0625,0.015625
Mat 3=data/menu/gui/recmanual/recmancover2.tga
Crop 3=0.7861328125,0,0.0810546875,0.0703125
MatFlags=0x1
TexFmt=0x9
StatesColors=0xB0B0B0FF, 0xFF, 0xFFFFFFFF, 0xFFFFFFFF

[G25 I6]
Name=Close
Type=1032;Button
ItemID=0x25050005
ParentID=0x25050000
Pos=528,0,48,43
Color=0xFFFFFFFF
Materials=4
Display=2;Linear
Mat 0=data/menu/gui/recmanual/icons.tga
Crop 0=0.9375,0,0.0625,0.015625
Mat 1=data/menu/gui/recmanual/icons.tga
Crop 1=0.9375,0,0.0625,0.015625
Mat 2=data/menu/gui/recmanual/icons.tga
Crop 2=0.9375,0,0.0625,0.015625
Mat 3=data/menu/gui/recmanual/RecManCover2.tga
Crop 3=0.953125,0,0.046875,0.083984375
MatFlags=0x1
TexFmt=0x9
StatesColors=0xB0B0B0FF, 0xFF, 0xFFFFFFFF, 0xFFFFFFFF

[G25 I44]
Name=Bkgr
Type=1031;Stat bmp array
ItemID=0x25060001
ParentID=0x25060000
Pos=0,0,576,356
Materials=1
Display=0;Linear
Mat0=data/menu/gui/recmanual/RecManBkgr2.tga
Crop 0=0,0,0.5625,0.6953125
MatFlags=0x1
TexFmt=0x9
Drag=false
BmpState=1
NeedFocus=true
SelOne=true
IdGroup=0
StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF
[color=red]

04-09-06, 03:40 PM

those entries was to be replace to RecManual.tga.

That what you said you did.

ADukes · 04-09-06, 03:41 PM

Probably an mistake in the readme of one of the install packages.
Which one did you use?

This is the same part out of the complete kit download readme:

[G25 I4]
Name=Next
Type=1032;Button
ItemID=0x25050004
ParentID=0x25050000
Pos=309,-162,83,36
Color=0xFFFFFFFF
Materials=4
Display=2;Linear
Mat 0=data/menu/gui/recmanual/icons.tga
Crop 0=0.9375,0,0.0625,0.015625
Mat 1=data/menu/gui/recmanual/icons.tga
Crop 1=0.9375,0,0.0625,0.015625
Mat 2=data/menu/gui/recmanual/icons.tga
Crop 2=0.9375,0,0.0625,0.015625
Mat 3=data/menu/gui/recmanual/RecManual.tga
Crop 3=0.04052734375,0.8125,0.04052734375,0.0703125
MatFlags=0x1
TexFmt=0x9
StatesColors=0xB0B0B0FF, 0xFF, 0xFFFFFFFF, 0xFFFFFFFF

[G25 I5]
Name=Previous
Type=1032;Button
ItemID=0x25050003
ParentID=0x25050000
Pos=226,-162,83,36
Color=0xFFFFFFFF
Materials=4
Display=2;Linear
Mat 0=data/menu/gui/recmanual/icons.tga
Crop 0=0.9375,0,0.0625,0.015625
Mat 1=data/menu/gui/recmanual/icons.tga
Crop 1=0.9375,0,0.0625,0.015625
Mat 2=data/menu/gui/recmanual/icons.tga
Crop 2=0.9375,0,0.0625,0.015625
Mat 3=data/menu/gui/recmanual/RecManual.tga
Crop 3=0,0.8125,0.04052734375,0.0703125
MatFlags=0x1
TexFmt=0x9
StatesColors=0xB0B0B0FF, 0xFF, 0xFFFFFFFF, 0xFFFFFFFF

[G25 I6]
Name=Close
Type=1032;Button
ItemID=0x25050005
ParentID=0x25050000
Pos=528,0,48,43
Color=0xFFFFFFFF
Materials=4
Display=2;Linear
Mat 0=data/menu/gui/recmanual/icons.tga
Crop 0=0.9375,0,0.0625,0.015625
Mat 1=data/menu/gui/recmanual/icons.tga
Crop 1=0.9375,0,0.0625,0.015625
Mat 2=data/menu/gui/recmanual/icons.tga
Crop 2=0.9375,0,0.0625,0.015625
Mat 3=data/menu/gui/recmanual/RecManual.tga
Crop 3=0,0.712890625,0.0234375,0.083984375
MatFlags=0x1
TexFmt=0x9
StatesColors=0xB0B0B0FF, 0xFF, 0xFFFFFFFF, 0xFFFFFFFF

[G25 I44]
Name=Bkgr
Type=1031;Stat bmp array
ItemID=0x25060001
ParentID=0x25060000
Pos=0,0,576,356
Materials=1
Display=0;Linear
Mat 0=data/menu/gui/recmanual/RecManual.tga
;Crop 0=0.642578125,0,0.28125,0.6953125; Low Contrast Pages
Crop 0=0.3544921875,0,0.28125,0.6953125; High Contrast Pages
MatFlags=0x1
TexFmt=0x9
Drag=false
BmpState=1
NeedFocus=true
SelOne=true
IdGroup=0
StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF

04-09-06, 03:45 PM

Aduke, you are correct. Hick had a problem with a IuB version which was wrong and I reuploaded right after he noticed it. There's should be no more problem for IuB users now.

Hitch · 04-09-06, 03:48 PM

I'll give it a fresh start.

Hitch

Hitch · 04-09-06, 04:11 PM

JonZ,

Could you check your latest JIRM IuB version's "menu_1024_768.ini"

It appears to have two full sets of G25 entires. The first set contains the RecManCover2.tga and RecManBkgr2.tga entries, and the next appears normal. Could this be the problem?

Hitch

04-09-06, 04:13 PM

Well, I was downloading it at the library, but I grabbed the new SHIII Commander first, and ran out of time 88% of the way through the RM download.

Next week, for sure.

04-09-06, 04:14 PM

Quote:

Originally Posted by Hitch

JonZ,

Could you check your latest JIRM IuB version's "menu_1024_768.ini"

It appears to have two full sets of G25 entires. The first set contains the RecManCover2.tga and RecManBkgr2.tga entries, and the next appears normal. Could this be the problem?

Hitch

Yes, that's what I've tried to explain. When you first alerted about the problem, I investigated the IuB pack and found it wasn't the good ini version. So I immediately replaced by the correct one.

It now should be one file RecManual.tga with new coordinates.

JCWolf · 04-09-06, 04:27 PM

Quote:

Originally Posted by JonZ

Quote:

Originally Posted by jcwolf

Quote:

Originally Posted by JonZ

Quote:

Originally Posted by jcwolf

Beside you guys can Jonz tell me if it is because of me beeing using the portuguese language keybard...???

Possibly.

Here in case you missed out

If not then a problem lies perhaps in command cfg files

Thanks missed the activation part yes

But also, will try to increase the beautifull work you've made by sliding the Task bar...

Not all but the Central parte and officers parte just living the Dials...

Why don't you use Simfree mod? it all about lowering the taskbar with bigger dials?

IHMO that would be rather much usefull if you make a version of Simfree combined with all the available mods like I did for GW and TW

Just done it JONZ if you whant to check it out!

http://www.subsim.com/phpBB/viewtopic.php?t=51051

Hitch · 04-09-06, 04:34 PM

Quote:

Originally Posted by JonZ

Yes, that's what I've tried to explain. When you first alerted about the problem, I investigated the IuB pack and found it wasn't the good ini version. So I immediately replaced by the correct one.

It now should be one file RecManual.tga with new coordinates.

JonZ,
I understand that. Just to be SURE just I re-dloaded and installed the UPDATED file and the "menu_1024_768.ini" still contains two sets of the G25 entries and the problem still exists. This is also on a fresh SH3 install (what the heck

)

Hitch

04-09-06, 04:55 PM

Quote:

Originally Posted by Hitch

Quote:

Originally Posted by JonZ

Yes, that's what I've tried to explain. When you first alerted about the problem, I investigated the IuB pack and found it wasn't the good ini version. So I immediately replaced by the correct one.

It now should be one file RecManual.tga with new coordinates.

JonZ,
I understand that. Just to be SURE just I re-dloaded and installed the UPDATED file and the "menu_1024_768.ini" still contains two sets of the G25 entries and the problem still exists. This is also on a fresh SH3 install (what the heck

)

Hitch

You... You are right

Geez that file is cursed or something. I really appologise for this.

Reuploading a good version.

heh, you're unlucky with my IuB files, it like, what, the third time?

JonZ

04-09-06, 12:20 PM	#1
Hitch Sailor man Join Date: Feb 2003 Location: Maine, USA Posts: 46 Downloads: 0 Uploads: 0	Ha! I was right in the middle of writing you to tell you I'd found the problem as well! :rotfl: :rotfl: :rotfl: :rotfl: Thanks for the update! Hitch __________________

04-09-06, 12:43 PM	#3
Hitch Sailor man Join Date: Feb 2003 Location: Maine, USA Posts: 46 Downloads: 0 Uploads: 0	JonZ, I'm not seeing any difference. The "culprit" I found earlier was that the menu_1024_768.ini contain references to two files which are not included: recmancover2.tga and RecManBkgr2.tga. Hope this helps! Hitch __________________

04-09-06, 03:48 PM	#9
Hitch Sailor man Join Date: Feb 2003 Location: Maine, USA Posts: 46 Downloads: 0 Uploads: 0	I'll give it a fresh start. Hitch __________________

04-09-06, 04:11 PM	#10
Hitch Sailor man Join Date: Feb 2003 Location: Maine, USA Posts: 46 Downloads: 0 Uploads: 0	JonZ, Could you check your latest JIRM IuB version's "menu_1024_768.ini" It appears to have two full sets of G25 entires. The first set contains the RecManCover2.tga and RecManBkgr2.tga entries, and the next appears normal. Could this be the problem? Hitch __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-09-06, 03:40 PM	#6
JonZ Stowaway Posts: n/a Downloads: Uploads:	those entries was to be replace to RecManual.tga. That what you said you did.

04-09-06, 03:41 PM	#7
ADukes Sailor man Join Date: Feb 2006 Posts: 45 Downloads: 0 Uploads: 0	Probably an mistake in the readme of one of the install packages. Which one did you use? This is the same part out of the complete kit download readme: [G25 I4] Name=Next Type=1032;Button ItemID=0x25050004 ParentID=0x25050000 Pos=309,-162,83,36 Color=0xFFFFFFFF Materials=4 Display=2;Linear Mat 0=data/menu/gui/recmanual/icons.tga Crop 0=0.9375,0,0.0625,0.015625 Mat 1=data/menu/gui/recmanual/icons.tga Crop 1=0.9375,0,0.0625,0.015625 Mat 2=data/menu/gui/recmanual/icons.tga Crop 2=0.9375,0,0.0625,0.015625 Mat 3=data/menu/gui/recmanual/RecManual.tga Crop 3=0.04052734375,0.8125,0.04052734375,0.0703125 MatFlags=0x1 TexFmt=0x9 StatesColors=0xB0B0B0FF, 0xFF, 0xFFFFFFFF, 0xFFFFFFFF [G25 I5] Name=Previous Type=1032;Button ItemID=0x25050003 ParentID=0x25050000 Pos=226,-162,83,36 Color=0xFFFFFFFF Materials=4 Display=2;Linear Mat 0=data/menu/gui/recmanual/icons.tga Crop 0=0.9375,0,0.0625,0.015625 Mat 1=data/menu/gui/recmanual/icons.tga Crop 1=0.9375,0,0.0625,0.015625 Mat 2=data/menu/gui/recmanual/icons.tga Crop 2=0.9375,0,0.0625,0.015625 Mat 3=data/menu/gui/recmanual/RecManual.tga Crop 3=0,0.8125,0.04052734375,0.0703125 MatFlags=0x1 TexFmt=0x9 StatesColors=0xB0B0B0FF, 0xFF, 0xFFFFFFFF, 0xFFFFFFFF [G25 I6] Name=Close Type=1032;Button ItemID=0x25050005 ParentID=0x25050000 Pos=528,0,48,43 Color=0xFFFFFFFF Materials=4 Display=2;Linear Mat 0=data/menu/gui/recmanual/icons.tga Crop 0=0.9375,0,0.0625,0.015625 Mat 1=data/menu/gui/recmanual/icons.tga Crop 1=0.9375,0,0.0625,0.015625 Mat 2=data/menu/gui/recmanual/icons.tga Crop 2=0.9375,0,0.0625,0.015625 Mat 3=data/menu/gui/recmanual/RecManual.tga Crop 3=0,0.712890625,0.0234375,0.083984375 MatFlags=0x1 TexFmt=0x9 StatesColors=0xB0B0B0FF, 0xFF, 0xFFFFFFFF, 0xFFFFFFFF [G25 I44] Name=Bkgr Type=1031;Stat bmp array ItemID=0x25060001 ParentID=0x25060000 Pos=0,0,576,356 Materials=1 Display=0;Linear Mat 0=data/menu/gui/recmanual/RecManual.tga ;Crop 0=0.642578125,0,0.28125,0.6953125; Low Contrast Pages Crop 0=0.3544921875,0,0.28125,0.6953125; High Contrast Pages MatFlags=0x1 TexFmt=0x9 Drag=false BmpState=1 NeedFocus=true SelOne=true IdGroup=0 StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF

04-09-06, 03:45 PM	#8
JonZ Stowaway Posts: n/a Downloads: Uploads:	Aduke, you are correct. Hick had a problem with a IuB version which was wrong and I reuploaded right after he noticed it. There's should be no more problem for IuB users now.

04-09-06, 04:13 PM	#11
Sailor Steve Stowaway Posts: n/a Downloads: Uploads:	Well, I was downloading it at the library, but I grabbed the new SHIII Commander first, and ran out of time 88% of the way through the RM download. Next week, for sure.