Torpedo Dials for Attack Peri & UZO for German Boats

FLB Sale U999 · 05-05-08, 03:02 PM

Hi,

SHIV 1.4 & 1.5 are using the same menu_ini.

The differenz between SHIV`s 1.4 & 1.5 menu_ini to SHIII is the Problem.

Not directly the new Zone-Line, but things like the Slideout Phantomfield.....

Also in SHIV the dials in the dials.cfg are little bit different. Exactly the Maindials in ur HUD are changed in SHIV 1.5 by code because of the switching in SHIV between Uboats and Fleetboats....

Greetings Sale

FLB Sale U999 · 06-22-08, 09:26 AM

Hi all,

A small edition of this Mod for those who would prefer to have the TARGET SPEED Dial instead of the SPREAD ANGLE in this mod.

DCB asked me to make that, so maybe it could be also helpfull for other players which would like to set the target speed manually rather in the Peri and UZO then only on the TDC Map....

Screeny for better imagine:

The installation is easy, just copy&paste and replacing some Blocks...

Ok, here u go.

First Change in ur dials.cfg:

Add 2 Numbers to ur DialsNo=XX at the top of the File.

Then find this block ([DialXX] Numbers u have to find and change by urself):

[DialXX]
Name=Spread_angle; FLB Sale`s Torpedo Anzeigen, Torpedofächerwinkel Peri
Type=33; DIAL_SPREAD_ANGLE
Cmd=Set_spread_angle
Dial=0x2620B002
CrtVal=0x2620B001
NewVal=0x0
DialVal=0,180
RealVal=0,20; degrees
Circular=Yes
CmdOnDrag=Yes

and change it into this one:

[DialXX]
Name=Sol_Speed;Attack Peri
Type=28; DIAL_SOL_SPEED
Cmd=Set_TDC_target_speed
Dial=0x2620B002
CrtVal=0x2620B001
NewVal=0x0
DialVal=15,345
RealVal=0,55; knots
Circular=Yes
CmdOnDrag=Yes
SndStep=1
SndList=1,Menu.TDC.Speed,55

Next find this block:

[DialXX]
Name=Spread_angle; FLB Sale`s Torpedo Anzeigen, Torpedofächerwinkel UZO
Type=33; DIAL_SPREAD_ANGLE
Cmd=Set_spread_angle
Dial=0x2820B002
CrtVal=0x2820B001
NewVal=0x0
DialVal=0,180
RealVal=0,20; degrees
Circular=Yes
CmdOnDrag=Yes

and change it into this one:

[DialXX]
Name=Sol_Speed;UZO
Type=28; DIAL_SOL_SPEED
Cmd=Set_TDC_target_speed
Dial=0x2820B002
CrtVal=0x2820B001
NewVal=0x0
DialVal=15,345
RealVal=0,55; knots
Circular=Yes
CmdOnDrag=Yes
SndStep=1
SndList=1,Menu.TDC.Speed,55

and for last add these 2 new blocks at the end of that file and change the DialXX numbers:

[DialXX]
Name=Sol_Torp_Speed; FLB Sale`s Torpedo Anzeigen, Torpgeschwindigkeit Peri
Type=17; DIAL_TORP_SPEED
Dial=0x0
CrtVal=0x2620B004
NewVal=0x0
DialVal=0,360
RealVal=0,60; knots
Circular=Yes

[DialXX]
Name=Sol_Torp_Speed; FLB Sale`s Torpedo Anzeigen, Torpgeschwindigkeit UZO
Type=17; DIAL_TORP_SPEED
Dial=0x0
CrtVal=0x2820B004
NewVal=0x0
DialVal=0,360
RealVal=0,60; knots
Circular=Yes

Save that file and now open ur menu_1024_768.ini.

Find in ur ini these Blocks in ur Attack Peri Sektion (G26 IXXX):
U have to renumber maybe the IXXX Numbers!!! I just took my ones, but u have to look which numbers u have there and renumber them if it is needed...

[G26 I172]
Name=Spread angle; FLB Sale`s Torpedo Anzeigen, Torpedofächerwinkel Peri
Type=1026;Menu group
ItemID=0x2620B000
ParentID=0x2620A000
Pos=137,0,140,187
Zone= -137 0 140 187 1 1 0x2620A000 0 0 0x2620B000 0 0 0 0
Color=0xFFFFFFFF

[G26 I173]
Name=Glass
Type=1031;Stat bmp array
ItemID=0x2620B003
ParentID=0x2620B000
Pos=4,-21,133,133
Zone= 4 -21 133 133 0 0 0x2620B000 0 0 0x2620B003 0 0 0 0
Materials=2
Display=0;No stretch
Mat 0=data/menu/gui/Layout/FLBTDC.dds
Crop 0=0.257813,0.00195313,0.259766,0.259766
Mat 1=data/menu/gui/Layout/FLBTDC.dds
Crop 1=0.257813,0.00195313,0.259766,0.259766
MatFlags=0x9
TexFmt=0x9
Drag=false
BmpState=0
NeedFocus=true
SelOne=false
IdGroup=0
StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF

[G26 I174]
Name=Val
Type=1031;Stat bmp array
ItemID=0x2620B001
ParentID=0x2620B000
Pos=56,-39,30,98
Zone= 56 -39 30 98 0 0 0x2620B000 0 0 0x2620B001 0 0 0 0
Materials=1
Display=5;Linear&rotation
Mat 0=data/menu/gui/Layout/FLBTDC.dds
Crop 0=0.830078,0.185547,0.0585938,0.191406
MatFlags=0x9
TexFmt=0x9
Drag=false
BmpState=0
NeedFocus=true
SelOne=false
IdGroup=0
StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF

[G26 I175]
Name=Dial
Type=1031;Stat bmp array
ItemID=0x2620B002
ParentID=0x2620B000
Pos=5,-24,130,130
Zone= 5 -24 130 130 0 0 0x2620B000 0 0 0x2620B002 0 0 0 0
Color=0xFFFFFFFF
Materials=1
Display=0;No stretch
Mat 0=data/menu/gui/Layout/FLBTDC1.dds
Crop 0=0.00195313,0.00390625,0.253906,0.507813
MatFlags=0x9
TexFmt=0x9
Drag=false
BmpState=1
NeedFocus=true
SelOne=false
IdGroup=0
StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF

[G26 I176]
Name=Perihintergrund
Type=1030;Static bmp
ItemID=0x2620B0004
ParentID=0x2620B000
Pos=0,0,350,320
Zone= -155 2 350 320 0 1 0x262B000 0 0 0x26200004 0 0 0 0
Color=0xFFFFFFFF
Materials=1
Display=2;Linear
Mat 0=data/menu/gui/Layout/Perihintergrund.dds
Crop 0=0,0,1,1
MatFlags=0x29
TexFmt=0x9

and replace those blocks with this blocks and maybe renumber ur IXXX Numbers if necessary:

[G26 I172]
Name=Speed; Target Speed Dial
Type=1026;Menu group
ItemID=0x2620B000
ParentID=0x2620A000
Pos=137,0,140,187
Zone= -137 0 140 187 1 1 0x2620A000 0 0 0x2620B000 0 0 0 0
Color=0xFFFFFFFF

[G26 I173]
Name=Glass
Type=1031;Stat bmp array
ItemID=0x2620B003
ParentID=0x2620B000
Pos=4,-21,133,133
Zone= 4 -21 133 133 0 0 0x2620B000 0 0 0x2620B003 0 0 0 0
Materials=2
Display=0;No stretch
Mat 0=data/menu/gui/tdc/tdc_metric.tga
Crop 0=0.257813,0.00195313,0.259766,0.259766
Mat 1=data/menu/gui/tdc/tdc_metric.tga
Crop 1=0.519531,0.00195313,0.259766,0.259766
MatFlags=0x9
TexFmt=0x0
Drag=false
BmpState=0
NeedFocus=true
SelOne=false
IdGroup=0
StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF

[G26 I174]
Name=Val
Type=1031;Stat bmp array
ItemID=0x2620B001
ParentID=0x2620B000
Pos=56,-39,30,122
Zone= 55 -28 30 122 0 0 0x2620B000 0 0 0x2620B001 0 0 0 0
Materials=1
Display=5;Linear&rotation
Mat 0=data/menu/gui/tdc/tdc_metric.tga
Crop 0=0.939453,0.181641,0.0585938,0.238281
MatFlags=0x9
TexFmt=0x0
Drag=false
BmpState=0
NeedFocus=true
SelOne=false
IdGroup=0
StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF

[G26 I175]
Name=Dial
Type=1031;Stat bmp array
ItemID=0x2620B002
ParentID=0x2620B000
Pos=5,-24,130,130
Zone= 5 -24 130 130 0 0 0x2620B000 0 0 0x2620B002 0 0 0 0
Color=0xFFFFFFFF
Materials=1
Display=0;No stretch
Mat 0=data/menu/gui/tdc/tdc_metric.tga
Crop 0=0.509766,0.525391,0.251953,0.251953
MatFlags=0x9
TexFmt=0x0
Drag=false
BmpState=1
NeedFocus=true
SelOne=false
IdGroup=0
StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF

[G26 I176]
Name=Torp speed dial
Type=1031;Stat bmp array
ItemID=0x2620B004
ParentID=0x2620B000
Pos=0,0,74,74
Zone= 34 -52 74 74 0 0 0x262B000 0 0 0x2620B004 0 0 0 0
Materials=1
Display=5;Linear&rotation
Mat 0=data/menu/gui/tdc/tdc1.tga
Crop 0=0.00195313,0.523438,0.144531,0.289063
MatFlags=0x9
TexFmt=0x0
Drag=false
BmpState=1
NeedFocus=true
SelOne=false
IdGroup=0
StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF

[G26 I177]
Name=Perihintergrund
Type=1030;Static bmp
ItemID=0x2620B0005
ParentID=0x2620B000
Pos=0,0,350,320
Zone= -155 2 350 320 0 1 0x262B000 0 0 0x26200005 0 0 0 0
Color=0xFFFFFFFF
Materials=1
Display=2;Linear
Mat 0=data/menu/gui/Layout/Perihintergrund.dds
Crop 0=0,0,1,1
MatFlags=0x29
TexFmt=0x9

Now the UZO Sektion G28 IXXX:

Find this blocks and like before whatch for ur IXXX Numbers there:

[G28 I158]
Name=Spread angle; FLB Sale`s Torpedo Anzeigen, Torpedofächerwinkel UZO
Type=1026;Menu group
ItemID=0x2820B000
ParentID=0x2820A000
Pos=137,0,140,187
Zone= -137 0 140 187 1 1 0x2820A000 0 0 0x2820B000 0 0 0 0
Color=0xFFFFFFFF

[G28 I159]
Name=Glass
Type=1031;Stat bmp array
ItemID=0x2820B003
ParentID=0x2820B000
Pos=4,-21,133,133
Zone= 4 -21 133 133 0 0 0x2820B000 0 0 0x2820B003 0 0 0 0
Materials=2
Display=0;No stretch
Mat 0=data/menu/gui/Layout/FLBTDC.dds
Crop 0=0.257813,0.00195313,0.259766,0.259766
Mat 1=data/menu/gui/Layout/FLBTDC.dds
Crop 1=0.257813,0.00195313,0.259766,0.259766
MatFlags=0x9
TexFmt=0x9
Drag=false
BmpState=0
NeedFocus=true
SelOne=false
IdGroup=0
StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF

[G28 I160]
Name=Val
Type=1031;Stat bmp array
ItemID=0x2820B001
ParentID=0x2820B000
Pos=56,-39,30,98
Zone= 56 -39 30 98 0 0 0x2820B000 0 0 0x2820B001 0 0 0 0
Materials=1
Display=5;Linear&rotation
Mat 0=data/menu/gui/Layout/FLBTDC.dds
Crop 0=0.830078,0.185547,0.0585938,0.191406
MatFlags=0x9
TexFmt=0x9
Drag=false
BmpState=0
NeedFocus=true
SelOne=false
IdGroup=0
StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF

[G28 I161]
Name=Dial
Type=1031;Stat bmp array
ItemID=0x2820B002
ParentID=0x2820B000
Pos=5,-24,130,130
Zone= 5 -24 130 130 0 0 0x2820B000 0 0 0x2820B002 0 0 0 0
Color=0xFFFFFFFF
Materials=1
Display=0;No stretch
Mat 0=data/menu/gui/Layout/FLBTDC1.dds
Crop 0=0.00195313,0.00390625,0.253906,0.507813
MatFlags=0x9
TexFmt=0x9
Drag=false
BmpState=1
NeedFocus=true
SelOne=false
IdGroup=0
StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF

[G28 I162]
Name=UZO Hintergrund
Type=1030;Static bmp
ItemID=0x2820B0004
ParentID=0x2820B000
Pos=0,0,350,320
Zone= -155 2 350 320 0 1 0x282B000 0 0 0x28200004 0 0 0 0
Color=0xFFFFFFFF
Materials=1
Display=2;Linear
Mat 0=data/menu/gui/Layout/Perihintergrund.dds
Crop 0=0,0,1,1
MatFlags=0x29
TexFmt=0x9

and replace those blocks with this ones and maybe renumber ur IXXX Numbers if necessary:

[G28 I158]
Name=Speed; Target Speed Dial
Type=1026;Menu group
ItemID=0x2820B000
ParentID=0x2820A000
Pos=137,0,140,187
Zone= -137 0 140 187 1 1 0x2820A000 0 0 0x2820B000 0 0 0 0
Color=0xFFFFFFFF

[G28 I159]
Name=Glass
Type=1031;Stat bmp array
ItemID=0x2820B003
ParentID=0x2820B000
Pos=4,-21,133,133
Zone= 4 -21 133 133 0 0 0x2820B000 0 0 0x2820B003 0 0 0 0
Materials=2
Display=0;No stretch
Mat 0=data/menu/gui/tdc/tdc_metric.tga
Crop 0=0.257813,0.00195313,0.259766,0.259766
Mat 1=data/menu/gui/tdc/tdc_metric.tga
Crop 1=0.519531,0.00195313,0.259766,0.259766
MatFlags=0x9
TexFmt=0x0
Drag=false
BmpState=0
NeedFocus=true
SelOne=false
IdGroup=0
StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF

[G28 I160]
Name=Val
Type=1031;Stat bmp array
ItemID=0x2820B001
ParentID=0x2820B000
Pos=56,-39,30,122
Zone= 55 -28 30 122 0 0 0x2820B000 0 0 0x2820B001 0 0 0 0
Materials=1
Display=5;Linear&rotation
Mat 0=data/menu/gui/tdc/tdc_metric.tga
Crop 0=0.939453,0.181641,0.0585938,0.238281
MatFlags=0x9
TexFmt=0x0
Drag=false
BmpState=0
NeedFocus=true
SelOne=false
IdGroup=0
StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF

[G28 I161]
Name=Dial
Type=1031;Stat bmp array
ItemID=0x2820B002
ParentID=0x2820B000
Pos=5,-24,130,130
Zone= 5 -24 130 130 0 0 0x2820B000 0 0 0x2820B002 0 0 0 0
Color=0xFFFFFFFF
Materials=1
Display=0;No stretch
Mat 0=data/menu/gui/tdc/tdc_metric.tga
Crop 0=0.509766,0.525391,0.251953,0.251953
MatFlags=0x9
TexFmt=0x0
Drag=false
BmpState=1
NeedFocus=true
SelOne=false
IdGroup=0
StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF

[G28 I162]
Name=Torp speed dial
Type=1031;Stat bmp array
ItemID=0x2820B004
ParentID=0x2820B000
Pos=0,0,74,74
Zone= 34 -52 74 74 0 0 0x282B000 0 0 0x2820B004 0 0 0 0
Materials=1
Display=5;Linear&rotation
Mat 0=data/menu/gui/tdc/tdc1.tga
Crop 0=0.00195313,0.523438,0.144531,0.289063
MatFlags=0x9
TexFmt=0x0
Drag=false
BmpState=1
NeedFocus=true
SelOne=false
IdGroup=0
StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF

[G28 I163]
Name=UZOhintergrund
Type=1030;Static bmp
ItemID=0x2820B0005
ParentID=0x2820B000
Pos=0,0,350,320
Zone= -155 2 350 320 0 1 0x282B000 0 0 0x28200005 0 0 0 0
Color=0xFFFFFFFF
Materials=1
Display=2;Linear
Mat 0=data/menu/gui/Layout/Perihintergrund.dds
Crop 0=0,0,1,1
MatFlags=0x29
TexFmt=0x9

Thats all, save and ur done

Should work, testet it and it works.

Have fun, greetings Sale

keltos01 · 06-22-08, 01:15 PM

excellent ! will try it right away

Do you think I might add it to my japanese sub mods, crediting you for it off course ?

Carotio · 06-22-08, 03:58 PM

Hi, I was wondering, if it would be possible to fix these options elsewhere?
I mean so that the notebook is visible again. To be more precise, I mean like this:

Carotio · 06-30-08, 06:00 PM

I didn't get any response to my request, hmm...

Well, so I allowed myself to create a modified version, I only lack to find out how to put in the extra dial in the center, ti the target speed dial.

Anyway for now it looks like this:

Sailor Steve · 06-30-08, 09:36 PM

Carotio, I would have responed but I still can't get the U-boat version yet. Still, I like where you've put them. I like seeing the clipboard too.

Are they permanent, or 'pop-up'?

Carotio · 07-01-08, 01:50 AM

Quote:

Originally Posted by Sailor Steve

Carotio, I would have responed but I still can't get the U-boat version yet. Still, I like where you've put them. I like seeing the clipboard too.

Are they permanent, or 'pop-up'?

They are permanent, but tied to the torpedo fire panel like Sale originally did it, so if you click to remove that they will slide to the right.

keltos01 · 07-01-08, 03:16 AM

great mod ! when I think that at first I couldn't even find the attack map, till I asked the forum.....

Carotio · 07-01-08, 04:37 AM

Well, here's the general plan of what I want to do:

And this is where I am stock for the moment:

Does anybody know, which line in menu_1024_768.ini controls, what stays on top and what goes underneath?
I have been looking in the tutorial here on subsim:
http://www.subsim.com/radioroom/showthread.php?t=111832
but I'm still uncertain, what it is to look for.

Kpt. Lehmann · 07-16-08, 12:05 AM

Nice work as always, Sale.

DarkFolle · 07-16-08, 09:03 AM

Rgr that! we will wait... like in the atlantic...

xristoskaiti · 04-19-09, 12:44 PM

I hope you know that who your a lot of friends mod cannot make the
changes that you ask in the (data/menu/cfg .........

06-22-08, 01:15 PM	#3
keltos01 Silent Hunter Join Date: Feb 2008 Location: Milan Italy Posts: 4,999 Downloads: 114 Uploads: 18	excellent ! will try it right away Do you think I might add it to my japanese sub mods, crediting you for it off course ? __________________ "Honorable Builder of Sinking Ships"

06-22-08, 03:58 PM	#4
Carotio Mr. Bad Wolf Join Date: Aug 2005 Location: Aabenraa, Denmark Posts: 1,488 Downloads: 47 Uploads: 0	Hi, I was wondering, if it would be possible to fix these options elsewhere? I mean so that the notebook is visible again. To be more precise, I mean like this: __________________ Download my mods from SHMF Follow my photography here taler dansk, speak English, spreche Deutsch, parle français, forstår svenska/norsk, comprendo castellano

06-30-08, 06:00 PM	#5
Carotio Mr. Bad Wolf Join Date: Aug 2005 Location: Aabenraa, Denmark Posts: 1,488 Downloads: 47 Uploads: 0	I didn't get any response to my request, hmm... Well, so I allowed myself to create a modified version, I only lack to find out how to put in the extra dial in the center, ti the target speed dial. Anyway for now it looks like this: __________________ Download my mods from SHMF Follow my photography here taler dansk, speak English, spreche Deutsch, parle français, forstår svenska/norsk, comprendo castellano

06-30-08, 09:36 PM	#6
Sailor Steve Eternal Patrol Join Date: Nov 2002 Location: High in the mountains of Utah Posts: 50,369 Downloads: 745 Uploads: 249	Carotio, I would have responed but I still can't get the U-boat version yet. Still, I like where you've put them. I like seeing the clipboard too. Are they permanent, or 'pop-up'? __________________ “Never do anything you can't take back.” —Rocky Russo

07-01-08, 03:16 AM	#8
keltos01 Silent Hunter Join Date: Feb 2008 Location: Milan Italy Posts: 4,999 Downloads: 114 Uploads: 18	great mod ! when I think that at first I couldn't even find the attack map, till I asked the forum..... __________________ "Honorable Builder of Sinking Ships"

05-05-08, 03:02 PM	#1
FLB Sale U999 Swabbie Join Date: Dec 2007 Posts: 6 Downloads: 0 Uploads: 0	Hi, SHIV 1.4 & 1.5 are using the same menu_ini. The differenz between SHIV`s 1.4 & 1.5 menu_ini to SHIII is the Problem. Not directly the new Zone-Line, but things like the Slideout Phantomfield..... Also in SHIV the dials in the dials.cfg are little bit different. Exactly the Maindials in ur HUD are changed in SHIV 1.5 by code because of the switching in SHIV between Uboats and Fleetboats.... Greetings Sale

06-22-08, 09:26 AM	#2
FLB Sale U999 Swabbie Join Date: Dec 2007 Posts: 6 Downloads: 0 Uploads: 0	Hi all, A small edition of this Mod for those who would prefer to have the TARGET SPEED Dial instead of the SPREAD ANGLE in this mod. DCB asked me to make that, so maybe it could be also helpfull for other players which would like to set the target speed manually rather in the Peri and UZO then only on the TDC Map.... Screeny for better imagine: The installation is easy, just copy&paste and replacing some Blocks... Ok, here u go. First Change in ur dials.cfg: Add 2 Numbers to ur DialsNo=XX at the top of the File. Then find this block ([DialXX] Numbers u have to find and change by urself): [DialXX] Name=Spread_angle; FLB Sale`s Torpedo Anzeigen, Torpedofächerwinkel Peri Type=33; DIAL_SPREAD_ANGLE Cmd=Set_spread_angle Dial=0x2620B002 CrtVal=0x2620B001 NewVal=0x0 DialVal=0,180 RealVal=0,20; degrees Circular=Yes CmdOnDrag=Yes and change it into this one: [DialXX] Name=Sol_Speed;Attack Peri Type=28; DIAL_SOL_SPEED Cmd=Set_TDC_target_speed Dial=0x2620B002 CrtVal=0x2620B001 NewVal=0x0 DialVal=15,345 RealVal=0,55; knots Circular=Yes CmdOnDrag=Yes SndStep=1 SndList=1,Menu.TDC.Speed,55 Next find this block: [DialXX] Name=Spread_angle; FLB Sale`s Torpedo Anzeigen, Torpedofächerwinkel UZO Type=33; DIAL_SPREAD_ANGLE Cmd=Set_spread_angle Dial=0x2820B002 CrtVal=0x2820B001 NewVal=0x0 DialVal=0,180 RealVal=0,20; degrees Circular=Yes CmdOnDrag=Yes and change it into this one: [DialXX] Name=Sol_Speed;UZO Type=28; DIAL_SOL_SPEED Cmd=Set_TDC_target_speed Dial=0x2820B002 CrtVal=0x2820B001 NewVal=0x0 DialVal=15,345 RealVal=0,55; knots Circular=Yes CmdOnDrag=Yes SndStep=1 SndList=1,Menu.TDC.Speed,55 and for last add these 2 new blocks at the end of that file and change the DialXX numbers: [DialXX] Name=Sol_Torp_Speed; FLB Sale`s Torpedo Anzeigen, Torpgeschwindigkeit Peri Type=17; DIAL_TORP_SPEED Dial=0x0 CrtVal=0x2620B004 NewVal=0x0 DialVal=0,360 RealVal=0,60; knots Circular=Yes [DialXX] Name=Sol_Torp_Speed; FLB Sale`s Torpedo Anzeigen, Torpgeschwindigkeit UZO Type=17; DIAL_TORP_SPEED Dial=0x0 CrtVal=0x2820B004 NewVal=0x0 DialVal=0,360 RealVal=0,60; knots Circular=Yes Save that file and now open ur menu_1024_768.ini. Find in ur ini these Blocks in ur Attack Peri Sektion (G26 IXXX): U have to renumber maybe the IXXX Numbers!!! I just took my ones, but u have to look which numbers u have there and renumber them if it is needed... [G26 I172] Name=Spread angle; FLB Sale`s Torpedo Anzeigen, Torpedofächerwinkel Peri Type=1026;Menu group ItemID=0x2620B000 ParentID=0x2620A000 Pos=137,0,140,187 Zone= -137 0 140 187 1 1 0x2620A000 0 0 0x2620B000 0 0 0 0 Color=0xFFFFFFFF [G26 I173] Name=Glass Type=1031;Stat bmp array ItemID=0x2620B003 ParentID=0x2620B000 Pos=4,-21,133,133 Zone= 4 -21 133 133 0 0 0x2620B000 0 0 0x2620B003 0 0 0 0 Materials=2 Display=0;No stretch Mat 0=data/menu/gui/Layout/FLBTDC.dds Crop 0=0.257813,0.00195313,0.259766,0.259766 Mat 1=data/menu/gui/Layout/FLBTDC.dds Crop 1=0.257813,0.00195313,0.259766,0.259766 MatFlags=0x9 TexFmt=0x9 Drag=false BmpState=0 NeedFocus=true SelOne=false IdGroup=0 StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF [G26 I174] Name=Val Type=1031;Stat bmp array ItemID=0x2620B001 ParentID=0x2620B000 Pos=56,-39,30,98 Zone= 56 -39 30 98 0 0 0x2620B000 0 0 0x2620B001 0 0 0 0 Materials=1 Display=5;Linear&rotation Mat 0=data/menu/gui/Layout/FLBTDC.dds Crop 0=0.830078,0.185547,0.0585938,0.191406 MatFlags=0x9 TexFmt=0x9 Drag=false BmpState=0 NeedFocus=true SelOne=false IdGroup=0 StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF [G26 I175] Name=Dial Type=1031;Stat bmp array ItemID=0x2620B002 ParentID=0x2620B000 Pos=5,-24,130,130 Zone= 5 -24 130 130 0 0 0x2620B000 0 0 0x2620B002 0 0 0 0 Color=0xFFFFFFFF Materials=1 Display=0;No stretch Mat 0=data/menu/gui/Layout/FLBTDC1.dds Crop 0=0.00195313,0.00390625,0.253906,0.507813 MatFlags=0x9 TexFmt=0x9 Drag=false BmpState=1 NeedFocus=true SelOne=false IdGroup=0 StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF [G26 I176] Name=Perihintergrund Type=1030;Static bmp ItemID=0x2620B0004 ParentID=0x2620B000 Pos=0,0,350,320 Zone= -155 2 350 320 0 1 0x262B000 0 0 0x26200004 0 0 0 0 Color=0xFFFFFFFF Materials=1 Display=2;Linear Mat 0=data/menu/gui/Layout/Perihintergrund.dds Crop 0=0,0,1,1 MatFlags=0x29 TexFmt=0x9 and replace those blocks with this blocks and maybe renumber ur IXXX Numbers if necessary: [G26 I172] Name=Speed; Target Speed Dial Type=1026;Menu group ItemID=0x2620B000 ParentID=0x2620A000 Pos=137,0,140,187 Zone= -137 0 140 187 1 1 0x2620A000 0 0 0x2620B000 0 0 0 0 Color=0xFFFFFFFF [G26 I173] Name=Glass Type=1031;Stat bmp array ItemID=0x2620B003 ParentID=0x2620B000 Pos=4,-21,133,133 Zone= 4 -21 133 133 0 0 0x2620B000 0 0 0x2620B003 0 0 0 0 Materials=2 Display=0;No stretch Mat 0=data/menu/gui/tdc/tdc_metric.tga Crop 0=0.257813,0.00195313,0.259766,0.259766 Mat 1=data/menu/gui/tdc/tdc_metric.tga Crop 1=0.519531,0.00195313,0.259766,0.259766 MatFlags=0x9 TexFmt=0x0 Drag=false BmpState=0 NeedFocus=true SelOne=false IdGroup=0 StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF [G26 I174] Name=Val Type=1031;Stat bmp array ItemID=0x2620B001 ParentID=0x2620B000 Pos=56,-39,30,122 Zone= 55 -28 30 122 0 0 0x2620B000 0 0 0x2620B001 0 0 0 0 Materials=1 Display=5;Linear&rotation Mat 0=data/menu/gui/tdc/tdc_metric.tga Crop 0=0.939453,0.181641,0.0585938,0.238281 MatFlags=0x9 TexFmt=0x0 Drag=false BmpState=0 NeedFocus=true SelOne=false IdGroup=0 StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF [G26 I175] Name=Dial Type=1031;Stat bmp array ItemID=0x2620B002 ParentID=0x2620B000 Pos=5,-24,130,130 Zone= 5 -24 130 130 0 0 0x2620B000 0 0 0x2620B002 0 0 0 0 Color=0xFFFFFFFF Materials=1 Display=0;No stretch Mat 0=data/menu/gui/tdc/tdc_metric.tga Crop 0=0.509766,0.525391,0.251953,0.251953 MatFlags=0x9 TexFmt=0x0 Drag=false BmpState=1 NeedFocus=true SelOne=false IdGroup=0 StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF [G26 I176] Name=Torp speed dial Type=1031;Stat bmp array ItemID=0x2620B004 ParentID=0x2620B000 Pos=0,0,74,74 Zone= 34 -52 74 74 0 0 0x262B000 0 0 0x2620B004 0 0 0 0 Materials=1 Display=5;Linear&rotation Mat 0=data/menu/gui/tdc/tdc1.tga Crop 0=0.00195313,0.523438,0.144531,0.289063 MatFlags=0x9 TexFmt=0x0 Drag=false BmpState=1 NeedFocus=true SelOne=false IdGroup=0 StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF [G26 I177] Name=Perihintergrund Type=1030;Static bmp ItemID=0x2620B0005 ParentID=0x2620B000 Pos=0,0,350,320 Zone= -155 2 350 320 0 1 0x262B000 0 0 0x26200005 0 0 0 0 Color=0xFFFFFFFF Materials=1 Display=2;Linear Mat 0=data/menu/gui/Layout/Perihintergrund.dds Crop 0=0,0,1,1 MatFlags=0x29 TexFmt=0x9 Now the UZO Sektion G28 IXXX: Find this blocks and like before whatch for ur IXXX Numbers there: [G28 I158] Name=Spread angle; FLB Sale`s Torpedo Anzeigen, Torpedofächerwinkel UZO Type=1026;Menu group ItemID=0x2820B000 ParentID=0x2820A000 Pos=137,0,140,187 Zone= -137 0 140 187 1 1 0x2820A000 0 0 0x2820B000 0 0 0 0 Color=0xFFFFFFFF [G28 I159] Name=Glass Type=1031;Stat bmp array ItemID=0x2820B003 ParentID=0x2820B000 Pos=4,-21,133,133 Zone= 4 -21 133 133 0 0 0x2820B000 0 0 0x2820B003 0 0 0 0 Materials=2 Display=0;No stretch Mat 0=data/menu/gui/Layout/FLBTDC.dds Crop 0=0.257813,0.00195313,0.259766,0.259766 Mat 1=data/menu/gui/Layout/FLBTDC.dds Crop 1=0.257813,0.00195313,0.259766,0.259766 MatFlags=0x9 TexFmt=0x9 Drag=false BmpState=0 NeedFocus=true SelOne=false IdGroup=0 StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF [G28 I160] Name=Val Type=1031;Stat bmp array ItemID=0x2820B001 ParentID=0x2820B000 Pos=56,-39,30,98 Zone= 56 -39 30 98 0 0 0x2820B000 0 0 0x2820B001 0 0 0 0 Materials=1 Display=5;Linear&rotation Mat 0=data/menu/gui/Layout/FLBTDC.dds Crop 0=0.830078,0.185547,0.0585938,0.191406 MatFlags=0x9 TexFmt=0x9 Drag=false BmpState=0 NeedFocus=true SelOne=false IdGroup=0 StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF [G28 I161] Name=Dial Type=1031;Stat bmp array ItemID=0x2820B002 ParentID=0x2820B000 Pos=5,-24,130,130 Zone= 5 -24 130 130 0 0 0x2820B000 0 0 0x2820B002 0 0 0 0 Color=0xFFFFFFFF Materials=1 Display=0;No stretch Mat 0=data/menu/gui/Layout/FLBTDC1.dds Crop 0=0.00195313,0.00390625,0.253906,0.507813 MatFlags=0x9 TexFmt=0x9 Drag=false BmpState=1 NeedFocus=true SelOne=false IdGroup=0 StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF [G28 I162] Name=UZO Hintergrund Type=1030;Static bmp ItemID=0x2820B0004 ParentID=0x2820B000 Pos=0,0,350,320 Zone= -155 2 350 320 0 1 0x282B000 0 0 0x28200004 0 0 0 0 Color=0xFFFFFFFF Materials=1 Display=2;Linear Mat 0=data/menu/gui/Layout/Perihintergrund.dds Crop 0=0,0,1,1 MatFlags=0x29 TexFmt=0x9 and replace those blocks with this ones and maybe renumber ur IXXX Numbers if necessary: [G28 I158] Name=Speed; Target Speed Dial Type=1026;Menu group ItemID=0x2820B000 ParentID=0x2820A000 Pos=137,0,140,187 Zone= -137 0 140 187 1 1 0x2820A000 0 0 0x2820B000 0 0 0 0 Color=0xFFFFFFFF [G28 I159] Name=Glass Type=1031;Stat bmp array ItemID=0x2820B003 ParentID=0x2820B000 Pos=4,-21,133,133 Zone= 4 -21 133 133 0 0 0x2820B000 0 0 0x2820B003 0 0 0 0 Materials=2 Display=0;No stretch Mat 0=data/menu/gui/tdc/tdc_metric.tga Crop 0=0.257813,0.00195313,0.259766,0.259766 Mat 1=data/menu/gui/tdc/tdc_metric.tga Crop 1=0.519531,0.00195313,0.259766,0.259766 MatFlags=0x9 TexFmt=0x0 Drag=false BmpState=0 NeedFocus=true SelOne=false IdGroup=0 StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF [G28 I160] Name=Val Type=1031;Stat bmp array ItemID=0x2820B001 ParentID=0x2820B000 Pos=56,-39,30,122 Zone= 55 -28 30 122 0 0 0x2820B000 0 0 0x2820B001 0 0 0 0 Materials=1 Display=5;Linear&rotation Mat 0=data/menu/gui/tdc/tdc_metric.tga Crop 0=0.939453,0.181641,0.0585938,0.238281 MatFlags=0x9 TexFmt=0x0 Drag=false BmpState=0 NeedFocus=true SelOne=false IdGroup=0 StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF [G28 I161] Name=Dial Type=1031;Stat bmp array ItemID=0x2820B002 ParentID=0x2820B000 Pos=5,-24,130,130 Zone= 5 -24 130 130 0 0 0x2820B000 0 0 0x2820B002 0 0 0 0 Color=0xFFFFFFFF Materials=1 Display=0;No stretch Mat 0=data/menu/gui/tdc/tdc_metric.tga Crop 0=0.509766,0.525391,0.251953,0.251953 MatFlags=0x9 TexFmt=0x0 Drag=false BmpState=1 NeedFocus=true SelOne=false IdGroup=0 StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF [G28 I162] Name=Torp speed dial Type=1031;Stat bmp array ItemID=0x2820B004 ParentID=0x2820B000 Pos=0,0,74,74 Zone= 34 -52 74 74 0 0 0x282B000 0 0 0x2820B004 0 0 0 0 Materials=1 Display=5;Linear&rotation Mat 0=data/menu/gui/tdc/tdc1.tga Crop 0=0.00195313,0.523438,0.144531,0.289063 MatFlags=0x9 TexFmt=0x0 Drag=false BmpState=1 NeedFocus=true SelOne=false IdGroup=0 StatesColors=0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF [G28 I163] Name=UZOhintergrund Type=1030;Static bmp ItemID=0x2820B0005 ParentID=0x2820B000 Pos=0,0,350,320 Zone= -155 2 350 320 0 1 0x282B000 0 0 0x28200005 0 0 0 0 Color=0xFFFFFFFF Materials=1 Display=2;Linear Mat 0=data/menu/gui/Layout/Perihintergrund.dds Crop 0=0,0,1,1 MatFlags=0x29 TexFmt=0x9 Thats all, save and ur done Should work, testet it and it works. Have fun, greetings Sale

07-01-08, 04:37 AM	#9
Carotio Mr. Bad Wolf Join Date: Aug 2005 Location: Aabenraa, Denmark Posts: 1,488 Downloads: 47 Uploads: 0	Well, here's the general plan of what I want to do: And this is where I am stock for the moment: Does anybody know, which line in menu_1024_768.ini controls, what stays on top and what goes underneath? I have been looking in the tutorial here on subsim: http://www.subsim.com/radioroom/showthread.php?t=111832 but I'm still uncertain, what it is to look for. __________________ Download my mods from SHMF Follow my photography here taler dansk, speak English, spreche Deutsch, parle français, forstår svenska/norsk, comprendo castellano

07-16-08, 12:05 AM	#10
Kpt. Lehmann GWX Project Director Join Date: Jul 2005 Location: The Republic of Texas Posts: 6,996 Downloads: 124 Uploads: 0	Nice work as always, Sale. __________________ www.thegreywolves.com All you need is good men. - Heinrich Lehmann-Willenbrock

07-16-08, 09:03 AM	#11
DarkFolle A-ganger Join Date: Jul 2006 Posts: 79 Downloads: 62 Uploads: 0	Rgr that! we will wait... like in the atlantic...

04-19-09, 12:44 PM	#12
xristoskaiti Lieutenant Join Date: May 2007 Location: pireas Posts: 256 Downloads: 482 Uploads: 0	I hope you know that who your a lot of friends mod cannot make the changes that you ask in the (data/menu/cfg .........

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode