Nvidia tweaks to SH3/SH4

jahlmeen · 03-26-08, 11:58 AM

Tja bracer, SH4 kan bara använda 2 kärnor (tror jag), kanske därför du inte märket någon skillnad

lancerr · 04-01-08, 10:54 PM

Was running my old stock dell drivers for my 7900 GS and was getting lots of lag with the Rubini settings.

Finally upgraded to the latest Forceware drivers and with the recommended settings and it looks absolutely gorgeous.

Take a look. (still not sure why the water appears as bands but the sub is what I was concerned about)

I kept it at the 1680 res because resizing the pictures was introducing artifacts

M. Sarsfield · 04-03-08, 11:19 PM

Is anyone running SLI with this game? If so, how have you changed Rubini's settings to take advatage of it? I'm using two EVGA 7600 GT cards.

Schlendrian · 04-04-08, 04:53 AM

I have the same problem that Charlie901 describes, white lines or dots around every object that is submerged when viewed from above the surface.

Specs:

Core2Duo E8200, 4GB Corsair Twinx4096 C5 Ram (800 MHz), Zotac Geforce 8800GT Amp edition 512 MB Ram, I am using the latest Nvidia Drivers and nHancer setup exactly the way hcwolf9 described a few posts up

Any ideas?

hcwolf9 · 04-04-08, 06:16 AM

HI ALL Read my post a few up from this one. describes all my SLI settings.

Also to get rid of the white lines etc all around the sub and rivits, read my last post I tell you all how to fix it by turning on the Aniso or something. sorry forget what I wrote but read it. All SLI settings and graphics settings explained in my last post.

M. Sarsfield · 04-04-08, 08:18 AM

Quote:

check Anti-Aliasing - Supersampling 8xs

hcwolf9, I saw your post and I think my global settings are configured to what you have, except for the Supersampling. '8xs' was not an option that popped up for me. Maybe I need to see if nHancer has an update. I downloaded my version back in January.

M. Sarsfield · 04-04-08, 10:47 AM

hcwolf9,

I think I remember there being a vertical sync option in the graphics menu of SHIV. Did you disable that option to correspond with nHancer?

hcwolf9 · 04-04-08, 06:41 PM

M. Sarsfield,

I will go back and look at every setting I have for SH4, my windows, system setup etc and I will post on here. But in all my testing I found it was mostly due to the Aniso setting, but i will confirm for you later today. I will also post a pic or two for you all.

04-01-08, 10:54 PM	#2
lancerr Loader Join Date: Dec 2004 Posts: 88 Downloads: 21 Uploads: 0	Thanks for all your help. Was running my old stock dell drivers for my 7900 GS and was getting lots of lag with the Rubini settings. Finally upgraded to the latest Forceware drivers and with the recommended settings and it looks absolutely gorgeous. Take a look. (still not sure why the water appears as bands but the sub is what I was concerned about) I kept it at the 1680 res because resizing the pictures was introducing artifacts __________________ Best naval sim of all time - TF 1942

04-03-08, 11:19 PM	#3
M. Sarsfield Ace of the Deep Join Date: Aug 2007 Location: Tulsa, OK Posts: 1,016 Downloads: 0 Uploads: 0	Is anyone running SLI with this game? If so, how have you changed Rubini's settings to take advatage of it? I'm using two EVGA 7600 GT cards. __________________ MJS USS Batfish Volunteer/Reenactor www.ss310.com www.ussbatfish.com Communism killed over 100M people and all that I got was this lousy signature.* *http://www.hawaii.edu/powerkills/COM.ART.HTM

04-04-08, 06:16 AM	#5
hcwolf9 Swabbie Join Date: Mar 2008 Posts: 7 Downloads: 0 Uploads: 0	Running SLI in SH4 and no Artifacts HI ALL Read my post a few up from this one. describes all my SLI settings. Also to get rid of the white lines etc all around the sub and rivits, read my last post I tell you all how to fix it by turning on the Aniso or something. sorry forget what I wrote but read it. All SLI settings and graphics settings explained in my last post.

04-04-08, 10:47 AM	#7
M. Sarsfield Ace of the Deep Join Date: Aug 2007 Location: Tulsa, OK Posts: 1,016 Downloads: 0 Uploads: 0	hcwolf9, I think I remember there being a vertical sync option in the graphics menu of SHIV. Did you disable that option to correspond with nHancer? __________________ MJS USS Batfish Volunteer/Reenactor www.ss310.com www.ussbatfish.com Communism killed over 100M people and all that I got was this lousy signature.* *http://www.hawaii.edu/powerkills/COM.ART.HTM

04-04-08, 06:41 PM	#8
hcwolf9 Swabbie Join Date: Mar 2008 Posts: 7 Downloads: 0 Uploads: 0	SH4 SLI Settings M. Sarsfield, I will go back and look at every setting I have for SH4, my windows, system setup etc and I will post on here. But in all my testing I found it was mostly due to the Aniso setting, but i will confirm for you later today. I will also post a pic or two for you all.

03-26-08, 11:58 AM	#1
jahlmeen Swabbie Join Date: Mar 2008 Posts: 7 Downloads: 3 Uploads: 0	Tja bracer, SH4 kan bara använda 2 kärnor (tror jag), kanske därför du inte märket någon skillnad

04-04-08, 04:53 AM	#4
Schlendrian Nub Join Date: Jan 2008 Posts: 2 Downloads: 9 Uploads: 0	I have the same problem that Charlie901 describes, white lines or dots around every object that is submerged when viewed from above the surface. Specs: Core2Duo E8200, 4GB Corsair Twinx4096 C5 Ram (800 MHz), Zotac Geforce 8800GT Amp edition 512 MB Ram, I am using the latest Nvidia Drivers and nHancer setup exactly the way hcwolf9 described a few posts up Any ideas?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode