SUBSIM Radio Room Forums



SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997

Go Back   SUBSIM Radio Room Forums > Silent Hunter 3 - 4 - 5 > SHIII Mods Workshop
Forget password? Reset here

Reply
 
Thread Tools Display Modes
Old 12-17-06, 12:32 PM   #1
hocking
Sparky
 
Join Date: Apr 2006
Posts: 154
Downloads: 156
Uploads: 0
Default

As far as the Nonograph comment, is it not advisable to just install Wazoo's Nonograph Mod that is listed in the download section of this website into my GWX installation to get my Nonograph back onto my map? I just downloaded it again, and was getting ready to install it when I saw this post. Now I am hesitant to install this mod because I am afraid of messing something up in GWX.

Do we need a special Nonograph file to use in GWX that is different than Wazoo's file? Are there any other basic "Map Tool" mods that we should not install for the same reason. I know that I have already installed the compass around my ruler, and a transparent compass that I can put anywhere on my map with mods that came out a long time ago. I guess I thought these were just basic map tools that should not mess anything up in GWX. Am I wrong.
hocking is offline   Reply With Quote
Old 12-17-06, 12:34 PM   #2
bigboywooly
Rear Admiral
 
Join Date: Apr 2006
Location: Swindon, England
Posts: 10,151
Downloads: 35
Uploads: 0
Default

If you can provide a link to them someone can have a look
Not sure what cfg's it will change
__________________


My mediafire page http://www.mediafire.com/?11eoq19bq9r41
bigboywooly is offline   Reply With Quote
Old 12-17-06, 01:14 PM   #3
gouldjg
Grey Wolf
 
Join Date: Mar 2005
Location: Manchester UK
Posts: 881
Downloads: 4
Uploads: 0
Default

Quote:
Originally Posted by hocking
As far as the Nonograph comment, is it not advisable to just install Wazoo's Nonograph Mod that is listed in the download section of this website into my GWX installation to get my Nonograph back onto my map? I just downloaded it again, and was getting ready to install it when I saw this post. Now I am hesitant to install this mod because I am afraid of messing something up in GWX.

Do we need a special Nonograph file to use in GWX that is different than Wazoo's file? Are there any other basic "Map Tool" mods that we should not install for the same reason. I know that I have already installed the compass around my ruler, and a transparent compass that I can put anywhere on my map with mods that came out a long time ago. I guess I thought these were just basic map tools that should not mess anything up in GWX. Am I wrong.
I would wait for a GWX one cos I think it messes with your menu settings and might ruin GWX structure.

Someone should do it soon though (hope)

Nomograph is a essential for me cos all other methods are too hard
gouldjg is offline   Reply With Quote
Old 12-17-06, 10:07 PM   #4
JCWolf
Admiral
 
Join Date: Jan 2006
Location: Spain , Crossing Gibraltar!
Posts: 2,292
Downloads: 202
Uploads: 1
Default

Quote:
Originally Posted by gouldjg
Quote:
Originally Posted by hocking
As far as the Nonograph comment, is it not advisable to just install Wazoo's Nonograph Mod that is listed in the download section of this website into my GWX installation to get my Nonograph back onto my map? I just downloaded it again, and was getting ready to install it when I saw this post. Now I am hesitant to install this mod because I am afraid of messing something up in GWX.

Do we need a special Nonograph file to use in GWX that is different than Wazoo's file? Are there any other basic "Map Tool" mods that we should not install for the same reason. I know that I have already installed the compass around my ruler, and a transparent compass that I can put anywhere on my map with mods that came out a long time ago. I guess I thought these were just basic map tools that should not mess anything up in GWX. Am I wrong.
I would wait for a GWX one cos I think it messes with your menu settings and might ruin GWX structure.

Someone should do it soon though (hope)

Nomograph is a essential for me cos all other methods are too hard
I guess i cn do that specially for you mate...
__________________


JCWolf Mediafire SHIII Page

User name : JCWolf
Password : stefre@jcm
JCWolf is offline   Reply With Quote
Old 12-18-06, 01:55 AM   #5
gouldjg
Grey Wolf
 
Join Date: Mar 2005
Location: Manchester UK
Posts: 881
Downloads: 4
Uploads: 0
Default

Quote:
Originally Posted by jcwolf
Quote:
Originally Posted by gouldjg
Quote:
Originally Posted by hocking
As far as the Nonograph comment, is it not advisable to just install Wazoo's Nonograph Mod that is listed in the download section of this website into my GWX installation to get my Nonograph back onto my map? I just downloaded it again, and was getting ready to install it when I saw this post. Now I am hesitant to install this mod because I am afraid of messing something up in GWX.

Do we need a special Nonograph file to use in GWX that is different than Wazoo's file? Are there any other basic "Map Tool" mods that we should not install for the same reason. I know that I have already installed the compass around my ruler, and a transparent compass that I can put anywhere on my map with mods that came out a long time ago. I guess I thought these were just basic map tools that should not mess anything up in GWX. Am I wrong.
I would wait for a GWX one cos I think it messes with your menu settings and might ruin GWX structure.

Someone should do it soon though (hope)

Nomograph is a essential for me cos all other methods are too hard
I guess i cn do that specially for you mate...
That would be cool

Thanks mate
gouldjg is offline   Reply With Quote
Old 12-18-06, 06:05 AM   #6
JCWolf
Admiral
 
Join Date: Jan 2006
Location: Spain , Crossing Gibraltar!
Posts: 2,292
Downloads: 202
Uploads: 1
Default

Quote:
Originally Posted by gouldjg
Quote:
Originally Posted by jcwolf
Quote:
Originally Posted by gouldjg
Quote:
Originally Posted by hocking
As far as the Nonograph comment, is it not advisable to just install Wazoo's Nonograph Mod that is listed in the download section of this website into my GWX installation to get my Nonograph back onto my map? I just downloaded it again, and was getting ready to install it when I saw this post. Now I am hesitant to install this mod because I am afraid of messing something up in GWX.

Do we need a special Nonograph file to use in GWX that is different than Wazoo's file? Are there any other basic "Map Tool" mods that we should not install for the same reason. I know that I have already installed the compass around my ruler, and a transparent compass that I can put anywhere on my map with mods that came out a long time ago. I guess I thought these were just basic map tools that should not mess anything up in GWX. Am I wrong.
I would wait for a GWX one cos I think it messes with your menu settings and might ruin GWX structure.

Someone should do it soon though (hope)

Nomograph is a essential for me cos all other methods are too hard
I guess i cn do that specially for you mate...
That would be cool

Thanks mate
I've sent you a PM...
__________________


JCWolf Mediafire SHIII Page

User name : JCWolf
Password : stefre@jcm

Last edited by JCWolf; 12-18-06 at 11:20 AM.
JCWolf is offline   Reply With Quote
Old 12-18-06, 06:55 AM   #7
Phoenix3000
Weps
 
Join Date: Nov 2006
Location: London, England (Usually in a pub...)
Posts: 358
Downloads: 49
Uploads: 0
Default

Re. the draggable nomograph:

I have the 'wazoo' file already and put it into the layout folder and it works fine in GWX.

(I'm at the office right now and not with SH3 so folder may be wrong).

Anyway, I edited one of the config files as per the nomograph readme and it appears across the screen in the maproom. So far, so good.

But......

If there is a downloadable version designed specifically for GWX I would sure like to have it!

Thanks guys,

Px3000
Phoenix3000 is offline   Reply With Quote
Old 12-18-06, 07:41 AM   #8
JCWolf
Admiral
 
Join Date: Jan 2006
Location: Spain , Crossing Gibraltar!
Posts: 2,292
Downloads: 202
Uploads: 1
Quote:
Originally Posted by Phoenix3000
Re. the draggable nomograph:

I have the 'wazoo' file already and put it into the layout folder and it works fine in GWX.

(I'm at the office right now and not with SH3 so folder may be wrong).

Anyway, I edited one of the config files as per the nomograph readme and it appears across the screen in the maproom. So far, so good.

But......

If there is a downloadable version designed specifically for GWX I would sure like to have it!

Thanks guys,

Px3000
Don't mess up with the GWX original files that
you have bro...
I understand that everyone whants to improve
or configure the GWX to his own Requierments but
there are small detailled things on the GWX files that
you can acidently mess up and the game and mod
will not run as suposed...

Kpt Lenman Will clarify this Of possible addons to GWX
Soon enought, if you just enjoy the GWX mean wile
and be paciente and give The GWX Team a bracke to
Recover, you will have those questions and wiches
replyed...


Have fun guys...

Thanks for the Suport guys, you people are fantastic...
__________________


JCWolf Mediafire SHIII Page

User name : JCWolf
Password : stefre@jcm
JCWolf is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:34 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1995- 2025 Subsim®
"Subsim" is a registered trademark, all rights reserved.