Hello, I'm new here...

07-21-20, 02:59 PM

OK, my experience with installing SH IV on Windows 10!

1) Download SH IV from Steam;
2) It will be installed for you;
3) C: \> ProgramFiles86> Steam> Steamapps> Common> SH4> data> cfg> maincfg: [Video] = 1920, 1080, 60, 20: save;
4) C: \> ProgramFiles86> Steam> Steamapps> Common> SH4> data> ul: UgradeLauncher.exe (To install patch 1.4);
5) C: \ Program Files (x86) \ Steam \ steamapps \ common \ Silent Hunters Wolves of the Pacific: right click on sh4.exe> properties: Windows xp pack3; optimization etc for screen: tick; program by admin: tick.

You should work very carefull and slowly. It should work now.
At a startup screen I see now that the program at the bottom right shows that it is still version 1.3! Why, I don't understand!
Maybe someone can say something about it?

If someone here is reading this: Can anyone tell me if I can install the extension uboat mission (and thus patch 1.5) now? (So even though v1.3 is indicated in the bottom right!)

Please tell me how it goes...

easy

P.S. Some authors advise NOT to install SH IV in Program Files (86). I still have to study on that ....

Bubblehead1980 · 07-21-20, 04:17 PM

Welcome Aboard

Captain Hammer · 07-23-20, 04:52 PM

Thank you, easy, will give that a shot! (Looking at my control panel, it seems like it may have just downloaded into the wrong folder....)

Aktungbby · 07-23-20, 10:25 PM

Captain Hammer!

Macgregor the Hammer · 07-23-20, 11:40 PM

Welcome Skipper!

I've been playing for about 7 months now and I'm really addicted. Once you get past the frustrations of the learning curve, it really becomes a lot of fun.

So far I've.....
=been rammed by a merchant
=crushed my sub by taking it too deep
=killed a bunch of my crew through excessive co2
=grounding myself on a reef
=had my conning tower shot off by a destroyer
=hit a pier

It's all part of the learning curve.....

If you have a question and can't find the answer in a search....ASK!

--MacGregor

Mad Mardigan · 07-24-20, 03:11 AM

Quote:

Originally Posted by easy

OK, my experience with installing SH IV on Windows 10!

1) Download SH IV from Steam;
2) It will be installed for you;
3) C: \> ProgramFiles86> Steam> Steamapps> Common> SH4> data> cfg> maincfg: [Video] = 1920, 1080, 60, 20: save;
4) C: \> ProgramFiles86> Steam> Steamapps> Common> SH4> data> ul: UgradeLauncher.exe (To install patch 1.4);
5) C: \ Program Files (x86) \ Steam \ steamapps \ common \ Silent Hunters Wolves of the Pacific: right click on sh4.exe> properties: Windows xp pack3; optimization etc for screen: tick; program by admin: tick.

You should work very carefull and slowly. It should work now.
At a startup screen I see now that the program at the bottom right shows that it is still version 1.3! Why, I don't understand!
Maybe someone can say something about it?

If someone here is reading this: Can anyone tell me if I can install the extension uboat mission (and thus patch 1.5) now? (So even though v1.3 is indicated in the bottom right!)

Please tell me how it goes...

easy

P.S. Some authors advise NOT to install SH IV in Program Files (86). I still have to study on that ....

With acquiring SH4 through Steam, check your library, as I recall... the 1.5 aka Uboat Missions, should be there, ready to download & install... I bought from Steam a bit back, a 3 in 1 package deal... comprising SH3, SH4 & SH5.

If I am NOT mistaken, you bought SH4 through them, it should be available to d/l & install as I mentioned... it was there for Me. Should see two (2) SH4 listings... Silent Hunter: Wolves of the Pacific & Silent Hunter: Wolves of the Pacific: Uboat Missions.

M. M.

p.s.

Welcome aboard Kaleun...

07-24-20, 02:58 PM

@ Mad Mardigan:

Yes Thank you, I have installed The U-boat missions!

And now I have to start learning the way as you could read by Macgregor the Hammer somewhere in this treath...

Thank you and see you!

easy

Captain Hammer · 07-25-20, 06:14 PM

Ok, so, when I hit the "UgradeLauncher", it gave me the dialogue "Missing version targets."

Also, sh4.exe didn't download. Searched my entire hard drive for it and it didn't show up anywhere.

What specifically am I supposed to do with that "MainCfg" file, if anything....? Is that what's causing the hang-up?

Navelintel · 07-31-20, 10:44 AM

Quote:

Originally Posted by easy

OK, my experience with installing SH IV on Windows 10!

1) Download SH IV from Steam;
2) It will be installed for you;
3) C: \> ProgramFiles86> Steam> Steamapps> Common> SH4> data> cfg> maincfg: [Video] = 1920, 1080, 60, 20: save;
4) C: \> ProgramFiles86> Steam> Steamapps> Common> SH4> data> ul: UgradeLauncher.exe (To install patch 1.4);
5) C: \ Program Files (x86) \ Steam \ steamapps \ common \ Silent Hunters Wolves of the Pacific: right click on sh4.exe> properties: Windows xp pack3; optimization etc for screen: tick; program by admin: tick.

You should work very carefull and slowly. It should work now.
At a startup screen I see now that the program at the bottom right shows that it is still version 1.3! Why, I don't understand!
Maybe someone can say something about it?

If someone here is reading this: Can anyone tell me if I can install the extension uboat mission (and thus patch 1.5) now? (So even though v1.3 is indicated in the bottom right!)

Please tell me how it goes...

easy

P.S. Some authors advise NOT to install SH IV in Program Files (86). I still have to study on that ....

Welkom aan boord, Kapitein!

I had similar tribulations with reinstalls for SH4 in my past sea duty. If you're around long enough to ‘burn’ through a few computers and their OS in your gaming career, you'll come to learn of the idiosyncrasies of how this game interacts with other game launching platforms (i.e., UPLAY) not to mention its reaction to the various updates of Windows generated by MS.

Fortunately, with all the help offered from the congenial skippers in this forum, I have been able to sort out many of these issues. If I’m really stumped, my choice of last resort is the remote IT assistance offered through my ISP.

Recently, my game stopped launching and it never occurred to me to check and see if the compatibility settings were in synch with the launch platform (UPLAY) and the game on my computer. I also had a recent Windows 10 update which raised my suspicions. After a little detective work and the suggestions from propbeanie, I got my boat back in the water.

I also have SH3, which is not on UPLAY but was loaded via the original game disc that was also affected by the recent Windows 10 update but I’m not entirely sure why. I recall that I may have had both games in the same general subfolder in my game drive (I) which could have corrupted them in fell swoop, however, other games on my computer remained unaffected.

The beauty of digital downloads besides being extremely fast (depending on the game and site) is that if you ever need to uninstall and reinstall your games, you never have to worry about having the original discs but it helps immensely if you put your game activation keys or order numbers in a SAFE place so you can prove you had a legitimate copy of the game. It happened to me after a computer upgrade when I could no longer download SH4-Wolves of the Pacific-Uboat add-on after the installation of the stock game using my original game discs. When I was ready to install the Uboat add-on, I discovered the download was no longer available from the site that previously supported it. I contacted Ubisoft, gave them my game activation key for the Uboat add-on, then they sent me the SH4- Gold Edition download (which included the UBoat add-on), and I was back in business.

Geniet van je spel en blijf veilig.

Navelintel

Captain Hammer · 08-02-20, 04:41 PM

sh4.exe still doesn't download. Without that, I reckon I'm dead in the water. :/

Guess for now I'll have to content myself with UBOAT and hope the Deep Water Studio skippers are working on a Pacific version of it.

(Not that I have anything against U-boats, but I play the game for writing inspiration and it sure looks like DWS is onto something that can fill that void.)

07-21-20, 02:59 PM	#1
easy Stowaway Posts: n/a Downloads: Uploads:	OK, my experience with installing SH IV on Windows 10! 1) Download SH IV from Steam; 2) It will be installed for you; 3) C: \> ProgramFiles86> Steam> Steamapps> Common> SH4> data> cfg> maincfg: [Video] = 1920, 1080, 60, 20: save; 4) C: \> ProgramFiles86> Steam> Steamapps> Common> SH4> data> ul: UgradeLauncher.exe (To install patch 1.4); 5) C: \ Program Files (x86) \ Steam \ steamapps \ common \ Silent Hunters Wolves of the Pacific: right click on sh4.exe> properties: Windows xp pack3; optimization etc for screen: tick; program by admin: tick. You should work very carefull and slowly. It should work now. At a startup screen I see now that the program at the bottom right shows that it is still version 1.3! Why, I don't understand! Maybe someone can say something about it? If someone here is reading this: Can anyone tell me if I can install the extension uboat mission (and thus patch 1.5) now? (So even though v1.3 is indicated in the bottom right!) Please tell me how it goes... easy P.S. Some authors advise NOT to install SH IV in Program Files (86). I still have to study on that .... Last edited by easy; 07-21-20 at 03:10 PM.

07-23-20, 10:25 PM	#4
Aktungbby Gefallen Engel U-666 Join Date: Jul 2013 Location: On a tilted, overheated, overpopulated spinning mudball on Collision course with Andromeda Galaxy Posts: 30,032 Downloads: 24 Uploads: 0	Welcome aboard! Captain Hammer! __________________ "Only two things are infinite; The Universe and human squirrelyness?!!

07-23-20, 11:40 PM	#5
Macgregor the Hammer Chief Join Date: Nov 2019 Location: Minnesota Posts: 325 Downloads: 535 Uploads: 1	Welcome Skipper! I've been playing for about 7 months now and I'm really addicted. Once you get past the frustrations of the learning curve, it really becomes a lot of fun. So far I've..... =been rammed by a merchant =crushed my sub by taking it too deep =killed a bunch of my crew through excessive co2 =grounding myself on a reef =had my conning tower shot off by a destroyer =hit a pier It's all part of the learning curve..... If you have a question and can't find the answer in a search....ASK! --MacGregor __________________ "It's impossible to make anything fool proof....Fools are too ingenious!"

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

07-21-20, 04:17 PM	#2
Bubblehead1980 Navy Seal Join Date: Apr 2009 Location: Florida USA Posts: 7,121 Downloads: 605 Uploads: 44	Welcome Aboard

07-23-20, 04:52 PM	#3
Captain Hammer Swabbie Join Date: Jul 2020 Posts: 6 Downloads: 0 Uploads: 0	Thank you, easy, will give that a shot! (Looking at my control panel, it seems like it may have just downloaded into the wrong folder....)

07-24-20, 02:58 PM	#7
easy Stowaway Posts: n/a Downloads: Uploads:	@ Mad Mardigan: Yes Thank you, I have installed The U-boat missions! And now I have to start learning the way as you could read by Macgregor the Hammer somewhere in this treath... Thank you and see you! easy

07-25-20, 06:14 PM	#8
Captain Hammer Swabbie Join Date: Jul 2020 Posts: 6 Downloads: 0 Uploads: 0	Ok, so, when I hit the "UgradeLauncher", it gave me the dialogue "Missing version targets." Also, sh4.exe didn't download. Searched my entire hard drive for it and it didn't show up anywhere. What specifically am I supposed to do with that "MainCfg" file, if anything....? Is that what's causing the hang-up?

08-02-20, 04:41 PM	#10
Captain Hammer Swabbie Join Date: Jul 2020 Posts: 6 Downloads: 0 Uploads: 0	sh4.exe still doesn't download. Without that, I reckon I'm dead in the water. :/ Guess for now I'll have to content myself with UBOAT and hope the Deep Water Studio skippers are working on a Pacific version of it. (Not that I have anything against U-boats, but I play the game for writing inspiration and it sure looks like DWS is onto something that can fill that void.)