[REL] SteelViking's Interior Mod

[tamagotchii2003]

Originally Posted by Choum

Is there a fix for the VIIA electric room ?
I'm using an amd graphic card.

Choum thanks for posting this I have read for hours trying to figure out why my gauges also didn't look like the ones from Steel's screen shots. It would be rather nice for this to be included for the VIIA.

[SnipersHunter]

Where can i download this mod? "Fuel Gauge WoGaDi_SteelViking's Interior"

[volodya61]

Originally Posted by SnipersHunter

Where can i download this mod? "Fuel Gauge WoGaDi_SteelViking's Interior"

CLICK

[SnipersHunter]

Thx volodya

[tamagotchii2003]

While commencing a recharge of the batteries the dials on the ceiling of the engine room are indicating the starboard engine is charging however the port side shaft clutch is engaging shutting down the port propeller. a quick thought on fixing this would be to reverse the needles from port to the starboard side vice versa. this is on the Viia. on the Viib there is not a visual indication that the batteries are charging from either diesel engine.

[gap]

Hi guys

I was undecided until the last moment whether to start a new thread for this, or where else to post it.
Considering that I hope the present update to be included into one or more bigger mods, I have discarded the option of starting a new thread for it, and seeing that most of my tweaks are based on Steel Vikings's files, for the moment I am posting my little mod here.

What it does?

• diveplane 3d gauge graphics (command room), replaced with more realistic gauges. More notably: fore diveplane deflection scale changed to cover the +25 / -35 deg arc, as per real type VII specs and U-995's pictures, rather than the ±30 deg range, as used in stock game.
  
  
• 3d needles' shape changed according to U-995's pictures. This should make gauges' reading more intuitive.
  
  
• 3d needles' rotation arcs updated to cover the new scales.

Known limits

• My tweaks of fore diveplane's arc only affect deflection angles displayable by the corresponding 3d gauge, but actual fore diveplane deflection is still in the ±30 deg range. This is easily verifiable when not using TDW's diveplane control patch. I didn't check if the same happens with TDW's diveplane control patch enabled and fore diveplane's control set on "auto" though. Unfortunately I couldn't find any game controller where min/max diveplane deflection angles are set. I would appreciate if anyone could point me to the right direction, but I suspect that those are hardcoded values. If that was true, the only way to address the issue would be through a patch by TDW (provided that the current diveplane control patch doesn't deal with it already).
  
  
• Aft diveplane's UI control needle as modelled in TDW's New UI's, is pointing to the wrong direction compared to the 3d gauge needle, as modelled in stock game and retained by the present mod. I could have easily inverted aft needle's rotation to match New UI's corresponding feature, but I suspect that stock needle's settings are correct. See this post on New UI's thread for further detail (still waiting for an answer by TDW).

Compatibility

• Compatible with stock game, with or without Steel Viking's Interior Mod and/or Conus Graphic Mod (enable the present mod after the latter).
  
  
• Partly compatible with Silentmichal's Interior Mod. Enabling the latter on top of the present mod, will retain all the functionalities of both mods, with the one exception of needles' shape, which would be reverted to the stock "arrow" shape. Included in the 'Documentation' folder are the new needle models which silentmichal could inport import into his own mod for full compatibility. In the meanwhile, on request, I might also release a compatibility patch among the two mods.
  
  
• Might not be compatible with any other interior mod/ CR gauge fix mod whose files are getting overwritten. Should you need for compatibility with them, please get in touch with me.
  
  
• Use of TDW's diveplane control patch (+ an UI mod supporting diveplane control) together with this mod not strictly required, but strongly recommended.

Aknowledgemnts

For maximum compatibility, the present mod is based on SteelViking's Interior Mod files. Thank you SteelViking for you awesome mod.

Screenshots

A couple of images is worth a thousand words


Stock Diveplane gauges + "old" New UI's diveplane control dials. Notice that New UI's aft needle is reversed, compared to the corresponding 3d gauge. Dial graphics have been replaced with realistic ones in the last version of New UI's but, I believe, the aft needle is still pointing in the wrong direction.


The real thing; diveplanes in neutral position.


my tweaks of 3d diveplane gauges; diveplanes in crash dive position (i.e. max negative fore deflection, max positive aft deflection). Notice that fore diveplanes don't actually go beyond 30 deg down, even though their relative needle is set to display a wider negative deflection range. Conversely, during surfacing maneuvers the needle will point to max +25 deg (maximum displayable deflection), even though fore diveplanes are still actually capable of a +30 deg deflection (off-scale).

Download link

https://www.mediafire.com/?utkjydtqqr20uat

[gap]

@ TDW

Just in case you missed it (see the previous post in this thread for more details):

Originally Posted by gap

My tweaks of fore diveplane's arc only affect deflection angles displayable by the corresponding 3d gauge, but actual fore diveplane deflection is still in the ±30 deg range. This is easily verifiable when not using TDW's diveplane control patch. I didn't check if the same happens with TDW's diveplane control patch enabled and fore diveplane's control set on "auto" though. Unfortunately I couldn't find any game controller where min/max diveplane deflection angles are set. I would appreciate if anyone could point me to the right direction, but I suspect that those are hardcoded values. If that was true, the only way to address the issue would be through a patch by TDW (provided that the current diveplane control patch doesn't deal with it already).

Any idea on how to tweak stock diveplane angles? (actual angles, not dial's angles)