Windows - Delayed Write Failed

Onkel Neal · 05-05-13, 08:42 AM

I can run with just one card? Ok.

HB, you were going to suggest a replacement card? Will this work?

Got a new internal HD, will begin the resurrection this morning.....

HunterICX · 05-05-13, 09:10 AM

Yes your system will work fine with just one card, just because the cards supports SLI doesn't mean you have to run 2 cards at the same time.

Actually it's better to run just one card, the trouble and the performance which it may, may not or is very little isn't worth it. (unless you know a great deal about how to set it up, know and play the games that take benefit from it)
Read : http://en.wikipedia.org/wiki/Scalabl...erface#Caveats

So I would suggest to hold of on that replacement card and see how your system runs running just one 9800GT.

HunterICX

Onkel Neal · 05-05-13, 10:44 AM

I love you, man!

I pulled the card that had the video plug, moved the other down to that slot, and turned it on. PC booted up, no crazy distortion (that horizontal line is still there.... cable or monitor?). Driver seems to be recent, 3/14/13. 6.14.13.1422 (why can't they name these things sanely?

I am going to see how this works for a while, and may get a new SSD HD
http://www.amazon.com/Corsair-Exclus.../dp/B00B2X312S

then add it as the primary and move the old one to slave.

HunterICX · 05-05-13, 02:45 PM

Horizontal line?
You could try hooking up that monitor to something else (iirc you have a LCD monitor right?) to check if it's a flaw in the monitor or try different cables (VGA, DVI or HDMI if you have the output and input for it on Graphics card and Monitor)

Analog cable:
VGA

Digital Cable:
DVI:

HDMI:

When I got thise new system I noticed faint horizontal lines whenever I played a game this was because my PSU on the bottom of the case close to my Graphic card's output and when the PSU was working at higher capacity it caused to screw around with my analog signal causing black faint lines across the screen. I solved it from going from Analog (VGA cable) to Digital (HDMI).

So if you have DVI or HDMI cables lying around and you have the output for it on the graphics card and the input on the monitor give it a go.

HunterICX

Onkel Neal · 05-05-13, 05:05 PM

Well, I have VGA cables, and .

I switched to my old monitor--no line.

HunterICX · 05-05-13, 05:15 PM

Quote:

Originally Posted by Neal Stevens

I switched to my old monitor--no line.

Well that answers the question then

The line was a flaw in the monitor itself.

So how is the PC running?

HunterICX

Onkel Neal · 05-05-13, 05:21 PM

Seems to be working fine, no NV4_displ infinite loops or BSD so far.

I'm going to switch monitor cables and see if that changes anything. If not, then you are right, the 22 WS monitor has a glitch.

05-05-13, 08:42 AM	#1
Onkel Neal Born to Run Silent Join Date: Jan 1997 Location: Cougar Trap, Texas Posts: 21,385 Downloads: 541 Uploads: 224	I can run with just one card? Ok. HB, you were going to suggest a replacement card? Will this work? Got a new internal HD, will begin the resurrection this morning..... __________________ SUBSIM - 26 Years on the Web

05-05-13, 09:10 AM	#2
HunterICX Rear Admiral Join Date: May 2006 Location: Malaga, España Posts: 10,750 Downloads: 8 Uploads: 0	Yes your system will work fine with just one card, just because the cards supports SLI doesn't mean you have to run 2 cards at the same time. Actually it's better to run just one card, the trouble and the performance which it may, may not or is very little isn't worth it. (unless you know a great deal about how to set it up, know and play the games that take benefit from it) Read : http://en.wikipedia.org/wiki/Scalabl...erface#Caveats So I would suggest to hold of on that replacement card and see how your system runs running just one 9800GT. HunterICX __________________

05-05-13, 10:44 AM	#3
Onkel Neal Born to Run Silent Join Date: Jan 1997 Location: Cougar Trap, Texas Posts: 21,385 Downloads: 541 Uploads: 224	I love you, man! I pulled the card that had the video plug, moved the other down to that slot, and turned it on. PC booted up, no crazy distortion (that horizontal line is still there.... cable or monitor?). Driver seems to be recent, 3/14/13. 6.14.13.1422 (why can't they name these things sanely? I am going to see how this works for a while, and may get a new SSD HD http://www.amazon.com/Corsair-Exclus.../dp/B00B2X312S then add it as the primary and move the old one to slave. __________________ SUBSIM - 26 Years on the Web

05-05-13, 02:45 PM	#4
HunterICX Rear Admiral Join Date: May 2006 Location: Malaga, España Posts: 10,750 Downloads: 8 Uploads: 0	Horizontal line? You could try hooking up that monitor to something else (iirc you have a LCD monitor right?) to check if it's a flaw in the monitor or try different cables (VGA, DVI or HDMI if you have the output and input for it on Graphics card and Monitor) Analog cable: VGA Digital Cable: DVI: HDMI: When I got thise new system I noticed faint horizontal lines whenever I played a game this was because my PSU on the bottom of the case close to my Graphic card's output and when the PSU was working at higher capacity it caused to screw around with my analog signal causing black faint lines across the screen. I solved it from going from Analog (VGA cable) to Digital (HDMI). So if you have DVI or HDMI cables lying around and you have the output for it on the graphics card and the input on the monitor give it a go. HunterICX __________________

05-05-13, 05:05 PM	#5
Onkel Neal Born to Run Silent Join Date: Jan 1997 Location: Cougar Trap, Texas Posts: 21,385 Downloads: 541 Uploads: 224	Well, I have VGA cables, and . I switched to my old monitor--no line. __________________ SUBSIM - 26 Years on the Web

05-05-13, 05:21 PM	#7
Onkel Neal Born to Run Silent Join Date: Jan 1997 Location: Cougar Trap, Texas Posts: 21,385 Downloads: 541 Uploads: 224	Seems to be working fine, no NV4_displ infinite loops or BSD so far. I'm going to switch monitor cables and see if that changes anything. If not, then you are right, the 22 WS monitor has a glitch. __________________ SUBSIM - 26 Years on the Web

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode