Bearing in the binoculars in GWX ?

MultiDoc · 05-25-12, 07:33 AM

Appreciate all the replies gents, I know bearings in the binocular view isn't actually realistic but then again having no clue what the bearing is at the point you're looking at isn't either i think.

Again thanks for that link, will try it it out.

Sailor Steve · 05-25-12, 09:02 AM

Remove (or replace) compass bearing marks:
Originally Posted by danlisa
For those who want it, I can make a new TGA for just that sort of effect. Maybe using 0, 90, 180, 270 only. Or, just open the bearing.tga in a graphics suite and either erase the minor marks or re-paint the alpha channel. Either will work.
BTW for those who want the original bearing marks back, open your menu.ini and find the binos block, you'll see that the tga being used is bearing2.tga (IIRC), change it back to bearing.tga (IIRC) and the game will use the original file I left in there. Must have been clarvioant that day.

Remove Slideout Compass:
Originally posted by ichso
Youre request can be done easily. I just took a quick look into the file and its about 3 little changes:
first, make backups of [SH3 install]\data\Menu\menu_1024_768.ini and one of [SH3 install]\data\Menu\cfg\Dials.cfg
second, edit the menu_1024_768.ini and find the string [G3F I300] in there.
You've got to delete the following eight blocks (the ones 'g3f i300' to 'g3f i307'). (That's no problem because no blocks are following behind them in this section).
Then third, go to the ...\data\Menu\cfg\Dials.cfg to it's very end and delete the the block there (which begins with [Dial 52]). You should also go to the beginning of the dials.cfg and decrease the DialsNo setting by one.
Let us know whether it worked out, but there shouldn't be any problems.

I personally use a mod that not only has the compass but also has huge slideout depth and speed guages.

RustySubmarine · 05-25-12, 02:04 PM

Quote:

Originally Posted by Sailor Steve

Remove Slideout Compass:
Originally posted by ichso
Youre request can be done easily. I just took a quick look into the file and its about 3 little changes:
first, make backups of [SH3 install]\data\Menu\menu_1024_768.ini and one of [SH3 install]\data\Menu\cfg\Dials.cfg
second, edit the menu_1024_768.ini and find the string [G3F I300] in there.
You've got to delete the following eight blocks (the ones 'g3f i300' to 'g3f i307'). (That's no problem because no blocks are following behind them in this section).
Then third, go to the ...\data\Menu\cfg\Dials.cfg to it's very end and delete the the block there (which begins with [Dial 52]). You should also go to the beginning of the dials.cfg and decrease the DialsNo setting by one.
Let us know whether it worked out, but there shouldn't be any problems.

I personally use a mod that not only has the compass but also has huge slideout depth and speed guages.

Thank you for explaining how to remove the slide out Compass, which I don't use and find it annoying.

RustySubmarine · 05-25-12, 02:57 PM

Just done all the changes for removing the slide out compass and everything seems to running ok in the sim. The slide out compass is no longer there now when on the Map view.

The compass bearing marks are still not showing in the Binocular view, after installing the mod with JSME. Well they are not showing my pair of binoculars on my particular boat.

Sailor Steve · 05-25-12, 03:43 PM

Quote:

Originally Posted by RustySubmarine

The compass bearing marks are still not showing in the Binocular view, after installing the mod with JSME. Well they are not showing my pair of binoculars on my particular boat.

Mod? JSGME? You have to open the menu.ini and change the name in the Compass section.

RustySubmarine · 05-25-12, 04:04 PM

Quote:

Originally Posted by Sailor Steve

Mod? JSGME? You have to open the menu.ini and change the name in the Compass section.

Can you be more specific Steve and explain what I have to look for in the menu.ini ( I take it you are refering to the data\Menu\1024_768 ini )

What am I looking for and what do I have to change. Change to what?

Sailor Steve · 05-25-12, 07:12 PM

Sorry, I just pasted in the note I copied long ago. This post might prove more helpful.
http://www.subsim.com/radioroom/show...68&postcount=3

Gargamel · 05-25-12, 06:48 PM

Quote:

Originally Posted by MultiDoc

Appreciate all the replies gents, I know bearings in the binocular view isn't actually realistic but then again having no clue what the bearing is at the point you're looking at isn't either i think.

Again thanks for that link, will try it it out.

Just zoom in and out just like you would IRL. Put a pair of binos upto your eyes and spin around a few times. You won't have a very good idea o where your looking. Pull them off and look down at the boat. If you need an accurate reference, hit U an use the UZO.

05-25-12, 09:02 AM	#2
Sailor Steve Eternal Patrol Join Date: Nov 2002 Location: High in the mountains of Utah Posts: 50,369 Downloads: 745 Uploads: 249	Remove (or replace) compass bearing marks: Originally Posted by danlisa For those who want it, I can make a new TGA for just that sort of effect. Maybe using 0, 90, 180, 270 only. Or, just open the bearing.tga in a graphics suite and either erase the minor marks or re-paint the alpha channel. Either will work. BTW for those who want the original bearing marks back, open your menu.ini and find the binos block, you'll see that the tga being used is bearing2.tga (IIRC), change it back to bearing.tga (IIRC) and the game will use the original file I left in there. Must have been clarvioant that day. Remove Slideout Compass: Originally posted by ichso Youre request can be done easily. I just took a quick look into the file and its about 3 little changes: first, make backups of [SH3 install]\data\Menu\menu_1024_768.ini and one of [SH3 install]\data\Menu\cfg\Dials.cfg second, edit the menu_1024_768.ini and find the string [G3F I300] in there. You've got to delete the following eight blocks (the ones 'g3f i300' to 'g3f i307'). (That's no problem because no blocks are following behind them in this section). Then third, go to the ...\data\Menu\cfg\Dials.cfg to it's very end and delete the the block there (which begins with [Dial 52]). You should also go to the beginning of the dials.cfg and decrease the DialsNo setting by one. Let us know whether it worked out, but there shouldn't be any problems. I personally use a mod that not only has the compass but also has huge slideout depth and speed guages. __________________ “Never do anything you can't take back.” —Rocky Russo

05-25-12, 02:57 PM	#4
RustySubmarine Engineer Join Date: Jan 2005 Location: Tamworth UK. Presently,somewhere Below The Atlantic Posts: 213 Downloads: 364 Uploads: 0	Just done all the changes for removing the slide out compass and everything seems to running ok in the sim. The slide out compass is no longer there now when on the Map view. The compass bearing marks are still not showing in the Binocular view, after installing the mod with JSME. Well they are not showing my pair of binoculars on my particular boat. __________________ [SIGPIC][/SIGPIC] RUSTY SUBMARINE U534 Type IX40C Engine Room of U534 Now located at Birkenhead UK. I joined the navy to see the world What did I see? I saw the SEA!!!!

05-25-12, 07:12 PM	#7
Sailor Steve Eternal Patrol Join Date: Nov 2002 Location: High in the mountains of Utah Posts: 50,369 Downloads: 745 Uploads: 249	Sorry, I just pasted in the note I copied long ago. This post might prove more helpful. http://www.subsim.com/radioroom/show...68&postcount=3 __________________ “Never do anything you can't take back.” —Rocky Russo

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

05-25-12, 07:33 AM	#1
MultiDoc Swabbie Join Date: Nov 2005 Location: Thessaloniki, Greece Posts: 14 Downloads: 63 Uploads: 0	Appreciate all the replies gents, I know bearings in the binocular view isn't actually realistic but then again having no clue what the bearing is at the point you're looking at isn't either i think. Again thanks for that link, will try it it out.