![]() |
SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997 |
|
![]() |
#1 |
Sonar Guy
![]() Join Date: Sep 2002
Location: Sweden / UK
Posts: 386
Downloads: 33
Uploads: 0
|
![]()
Thanks for trying that out!
![]() It confirms what I thought - that the fast setting of the G7a is 44 kts and not 40 kts as they were on the actual U-boats. There's no error in the calculation. There may be slight inaccuracies caused by measurement since I'm using the ruler on the map which is only marked in 50m intervals, as you point out. Considering I'm using the Queen Mary at a speed of 25 kts for target practice, where I am firing the torpedo at the middle of a ship that is almost 300m long - one second error in timing is neglegible. It amounts to 12.8 metres. The problem was that I was assuming 40 kts was the fast torpedo speed, and using this figure in my calculations, when in actual fact the torpedos were doing 44 kts. This is why they were overshooting by over 300 metres. Well, at least that's cleared up!
__________________
Intel Core i9-9900K @ 3.6 GHz nVidia GeForce RTX 2070 32GB memory Windows 10 Pro Last edited by jason210; 01-16-12 at 01:15 PM. |
![]() |
![]() |
![]() |
#2 | |
Black Magic
![]() |
![]() Quote:
That sub dial inside the speed dial is the torpedo speed. When you switch from slow, medium, and fast this sub dial changes to show the torpedo speed. It will change based on torpedo selected and speed of torpedo selected ![]() I have lots of little details like this scattered all about the mod that I don't even remember them all ![]() |
|
![]() |
![]() |
![]() |
#3 |
Sonar Guy
![]() Join Date: Sep 2002
Location: Sweden / UK
Posts: 386
Downloads: 33
Uploads: 0
|
![]()
You're right, I hadn't noticed it before
![]() But it was fun timing toropedos and sinking the Queen Mary ![]() Great mod by the way. Thanks a lot!!
__________________
Intel Core i9-9900K @ 3.6 GHz nVidia GeForce RTX 2070 32GB memory Windows 10 Pro |
![]() |
![]() |
![]() |
#4 |
Grey Wolf
![]() Join Date: Nov 2010
Posts: 908
Downloads: 89
Uploads: 0
|
![]()
Here are some nice pre-calculated figures I did a while back. This will help with solutions. It won't resolve timing issues from calculation error or angle error (divergence-convergence of AOB during run) I do not have all possible speeds in here (I think there is an oddball 28kt torpedo slipping my mind) but here is what I have.
30kts: 925m/min. 40kts: 1233.334m/min. 44kts: 1356.67m/min. *Maximum Run* 30kts@3km(Electric Torp) 3.24min. 30kts@12.5km(Steam Torp Slow) 13.51min. 40kts@7.5km(Steam Torp Medium) 6.07min. 44kts@5km(Steam torp Fast) 3.69min. I hope this little bit of math helps. If nothing else, it will help select the right speed for you. |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|