[REL] Voice Recognition for SH5

[letterboy1]

Moderated: Not here, no cracks in Subsim.

[kraszus]

Download links appear to be dead

[Ernesto78]

Is there any Chance, that a German version is Released in this year?

Hope so...

Originally Posted by kraszus

Download links appear to be dead

Just checked, working fine here.

[kraszus]

Yep...site seems to be back up now. Lovely mod

[stoianm]

I instaled your mod but seams is in conflict with new ui 6.3.5 by TDW. What i must to do? To instal this mod before new ui 6.3.5 by TDW mod or the 2 mods are not compatible at all? The file that apear to be in ,,conflict,, is : menu_1024_768.ini

[kraszus]

Use notepad++ to 'compare' both ini files side by side and edit the ini file from the Speech mod to insert the missing lines that are present in the TDW ini. Don't copy one over the other...just insert the missing lines into the ini from the speech mod and renumber all the lines. Once this is done, then install the speech mod.

This is what I did and both mods now work perfectly together.

[stoianm]

Yep - I did that and is working now. Thank,s for advice.

[kraszus]

Glad it worked for you

[stoianm]

Hi - i used this mod before without problems but 2 day ago i lost all my data from my computer so i redown the mod again.

i installed this mod again but i have problems in game related to my voice recognition - i must to repeat for example manny times ,,all stop'' untill the computers reconize my voice and stop the Uboat (before worked just fine).

i am sure that, long time ago, when i installed the mod for the first time i did something to fix this problem but i do not remember what

so what i must to do to have this program working like before -

btw i have win7 ultimate (english us)

thanks

[MiTon]

Hello to together!

I've been here at Subsim Radio for quite a while, in a passive way (just reading and download those great mods), so here's my first post!
Hope I can help.


@stoianm

Did you already read side 4 off this thread? http://www.subsim.com/radioroom/show...=164926&page=4
In short:
- Checked your microphone inputlevel?
- what confidence level have you set in your data\Scripts\Menu\Page Speech Recognition.py file.?
Search for

speech.Confidence =

(maybe you should turn it down, 0,60 works good for me)
You can test this with the included SpeechEngineTest (does not effect setting in the Speech Recogniton.py file)


Greets


P.S: Big Thanks to this great Community here, helped me a thousand times, and a special one to the modders.
After SH3, I wouldn't have bought SH4 and SH5, if I hadn't known that you would be here an making a real great sim out of the SH-series.

[stoianm]

Originally Posted by MiTon

Hello to together!

I've been here at Subsim Radio for quite a while, in a passive way (just reading and download those great mods), so here's my first post!
Hope I can help.


@stoianm

Did you already read side 4 off this thread? http://www.subsim.com/radioroom/show...=164926&page=4
In short:
- Checked your microphone inputlevel?
- what confidence level have you set in your data\Scripts\Menu\Page Speech Recognition.py file.?
Search for

speech.Confidence =

(maybe you should turn it down, 0,60 works good for me)
You can test this with the included SpeechEngineTest (does not effect setting in the Speech Recogniton.py file)


Greets


P.S: Big Thanks to this great Community here, helped me a thousand times, and a special one to the modders.
After SH3, I wouldn't have bought SH4 and SH5, if I hadn't known that you would be here an making a real great sim out of the SH-series.

hi mate,

i think that this is the problem - the confidence from Speech Recogniton.py maybe is setted to high

i will try this , manny thanks

P.S. welcome aboard

Originally Posted by MiTon

- what confidence level have you set in your data\Scripts\Menu\Page Speech Recognition.py file

Hey MiTon, just a correction there. So as not to confuse anyone, it should be data\Scripts\Menu\Speech Recognition.py, without Page, although it shouldn't be hard to figure out, seeing that there are only 2 files there, but just in case. Congrats on your first post!


@stoianm - I concur that setting confidence usually does the trick.


Now, to my problem:

With SH5 v1.0, Speech Recognition worked like a charm.

Since the SH5 updates, I find that the AI will begin to issue commands on its own, as well as repeating the commands that I issue, which sometimes causes loops.

For example, I issue "All Stop!", then the AI repeats the command back to me and issues it. Speech Recognition hears this as a new command from me, and then the AI repeats the command back to me and issues it again, thus creating a loop: "All Stop!" "All Stop!" "All Stop!" "All Stop!" until I pause the game to cut it off. At the same time, AI may also issue commands for Deck Guns, etc.

As for ghost commands being issued, you can imagine the frustration when you are sitting patiently and quietly, ready to launch torpedos on a target that's just lining up, when suddenly, you hear "Surface the boat!" or "Los!" or the game goes into 32x speed. I suspect that these relate to background noise or from crew providing me with feedback on targets, etc.

I use the local offline version of grammar.dtd, but I don't think it's that, because I restored an old version of the online version of SHSpeech_Grammar, and the problem still exists.

When I first tried to troubleshoot this a few months ago, I believe I used the vanilla mod files to ensure that my edits weren't causing any problems, but to no avail.

I have confidence set to 10 which still doesn't help. One thing that helps a bit, although not 100%, is to decrease my speaker volume to a very low level, so that quieter crew command confirmations limit what Speech Recognition hears, but that isn't fun. I also tried using headphones, but for some reason it still happens from time to time (and too often).

Has anyone else also experienced this problem, or does anyone know a way to correct it?

skwasjer - any ideas?

Cheers!

[stoianm]

Originally Posted by 7Infanterie19

Hey MiTon, just a correction there. So as not to confuse anyone, it should be data\Scripts\Menu\Speech Recognition.py, without Page, although it shouldn't be hard to figure out, seeing that there are only 2 files there, but just in case. Congrats on your first post!


@stoianm - I concur that setting confidence usually does the trick.


Now, to my problem:

With SH5 v1.0, Speech Recognition worked like a charm.

Since the SH5 updates, I find that the AI will begin to issue commands on its own, as well as repeating the commands that I issue, which sometimes causes loops.

For example, I issue "All Stop!", then the AI repeats the command back to me and issues it. Speech Recognition hears this as a new command from me, and then the AI repeats the command back to me and issues it again, thus creating a loop: "All Stop!" "All Stop!" "All Stop!" "All Stop!" until I pause the game to cut it off. At the same time, AI may also issue commands for Deck Guns, etc.

As for ghost commands being issued, you can imagine the frustration when you are sitting patiently and quietly, ready to launch torpedos on a target that's just lining up, when suddenly, you hear "Surface the boat!" or "Los!" or the game goes into 32x speed. I suspect that these relate to background noise or from crew providing me with feedback on targets, etc.

I use the local offline version of grammar.dtd, but I don't think it's that, because I restored an old version of the online version of SHSpeech_Grammar, and the problem still exists.

When I first tried to troubleshoot this a few months ago, I believe I used the vanilla mod files to ensure that my edits weren't causing any problems, but to no avail.

I have confidence set to 10 which still doesn't help. One thing that helps a bit, although not 100%, is to decrease my speaker volume to a very low level, so that quieter crew command confirmations limit what Speech Recognition hears, but that isn't fun. I also tried using headphones, but for some reason it still happens from time to time (and too often).

Has anyone else also experienced this problem, or does anyone know a way to correct it?

skwasjer - any ideas?

Cheers!

i had the sames problems but i chosed the most simplest solution - i play the game using my headphonephone

btw if somebody want to use this mod with TDW UIs or wth MO just delete before the file menu_1024_768.ini from mod and enable after

[MiTon]

Oh thanks for the correction! Was lazy used copy and paste.

Perhaps you should set your confidence level to 1.00, 10 may create a "buffer overflow" setting your confidence level to 0.10 or 0.00!

I had the same issues with the speech recognition for SH4 a view times.
Think it was a problem with the soundcard drivers!
I would check that if you're having the problems with the headset too!
If they don't handle the channels properly...

A workaround for this might be, changing the orders to phrases that are more unique and don't mess with the readback of your crew.
Like "both engines stop" when your crews readback is "All stop"!

I'll keep an ear on it!