SH3 Commander-The Complete Super Deluxe Thallium Commander's Special Ultimate Edition

FIREWALL · 10-06-10, 03:03 PM

Problem... Commander opens to big on my screen. Can't drag screen far enough to tick Patrol button or any other buttons on bottom of screen.

Computer : Laptop HP Pavilion 17" Widescreen
Cpu 3.2 Intel DuoCore
Ram DDR2 PC6400 4GB x 2 8GB total
GPU Nividia 295 GTX
OS Win7 Pro 64 bit

Resolution set at 1024x768
SH3 Version w\o starforce and patched 1.4
Gwx 3.0

GWX plays fine solo. Anyboby have any ideas whats wrong ?

JScones · 10-06-10, 06:13 PM

I responded to your PM three weeks ago. You haven't answered my questions?

FIREWALL · 10-06-10, 06:59 PM

Hi JS

I reinstalled SHC and Cfg files. My career Kpt shows but no buttons at bottom of screen.

I can't take a screenshot as this Laptop is set up for offline gameing.

No internet, antivirus... Nothing to run in background.

There's nothing showing to tick to launch my career.

No Rollback button or Setting Options button showing.

If you can show me a screenshot I can tell you exactly whats not showing

rowi58 · 10-06-10, 11:11 PM

Nothing is wrong. Jaeson Jones did a marvellous job with his JSGME. But it is to you – the user – to use it in the right way.

For example, install JSGME in the right folder and give it the opportunity to connect to the SH3-installation (if you've got several installations of SH3, that means, for example, GWX 3.0 Gold, NYGM, LSH3 or WAC). Just “tell” JSGME where it must look for the program files. The installation routine will ask you.

I have installed most of all “Super-Mods” mentioned above and didn't have any problem with JSGME. By the way – it's time to say “Thank You” again to Jeason Jones. It runs on a Desktop computer and a Laptop computer. Jeason – what would we have done without your program??? For my person, i must say: NOTHING. I could not work without JSGME.

Greetings
rowi58

FIREWALL · 10-07-10, 12:13 PM

Quote:

Originally Posted by rowi58

nothing is wrong. Jaeson jones did a marvellous job with his jsgme. But it is to you – the user – to use it in the right way.

For example, install jsgme in the right folder and give it the opportunity to connect to the sh3-installation (if you've got several installations of sh3, that means, for example, gwx 3.0 gold, nygm, lsh3 or wac). Just “tell” jsgme where it must look for the program files. The installation routine will ask you.

I have installed most of all “super-mods” mentioned above and didn't have any problem with jsgme. By the way – it's time to say “thank you” again to jeason jones. It runs on a desktop computer and a laptop computer. Jeason – what would we have done without your program??? For my person, i must say: Nothing. I could not work without jsgme.

Greetings
rowi58

edited - that was absolutely unnecessary. Warning given - hitman (moderator)

Magic1111 · 10-07-10, 03:29 PM

Quote:

Originally Posted by FIREWALL

YOU IDIOT

Hey, no insults please!

Each can sometimes happen, that he confused the one with the other!!!!!

Or you are free of errors?

Best regards,
Magic

FIREWALL · 10-07-10, 10:24 PM

Quote:

Originally Posted by Magic1111

Hey, no insults please!

Each can sometimes happen, that he confused the one with the other!!!!!

Or you are free of errors?

Best regards,
Magic

I think before I post. And I shut my mouth when others are asking for help and I have nothing to offer to help.

JScones · 10-07-10, 10:57 PM

Quote:

Originally Posted by FIREWALL

I reinstalled SHC and Cfg files. My career Kpt shows but no buttons at bottom of screen.

I can't take a screenshot as this Laptop is set up for offline gameing.

No internet, antivirus... Nothing to run in background.

There's nothing showing to tick to launch my career.

No Rollback button or Setting Options button showing.

If you can show me a screenshot I can tell you exactly whats not showing

As I asked in my PM, are you running normal or large sized fonts? Given your screen resolution is presumably at 1024x768 and SH3Cmdr is only 857x621, then the only likely cause is running fonts greater than standard size.

Alternatively, how large is your task bar? If you dock it to one side, do the buttons appear? If your task bar is greater than about 150 pixels high, it will overlay SH3Cmdr.

Gargamel · 11-17-10, 05:51 PM

So I run SHC, everything seems ok. Then i use it to launch SH3, and SHC shutsdown. SH3 loads ok, but none of the settings from SHC are present.

It used to stay open during the game. I don't remember changing anything that would affect this. I have reinstalled SHC.

Any ideas?

EDIT: Specs: (Sorry

)

Win XP,
C2D 1.6m
4gb Ram
7800 (?) GTX
1 tb Raid 5 drive array

GWX - English Nav Map and Grid Refs
GWX - Late War Sensors Snorkel Antennas
GWX - 16km Atmosphere
GWX - Enhanced Damage Effects
GWX - Integrated Orders
GWX_DFa-Flag&Pens_2010
GWX - Lite Harbor Traffic
OLC's Modified Searchlight Beams for GWX3
Water_Stream_for_Uboats_V4
LifeBoats&Debris_v3B
Longer Repair Times 2.04 (All)
WB's Decks Awash + Fuel Economy
Pato3000m
GWX3.0 Additional_Ammo

frau kaleun · 11-17-10, 07:19 PM

Not sure what you mean by SH3 Commander continuing to run during the game - do you mean that when you launched the game from Commander and then exited the game, the Commander interface window would still be open just where you left it?

Cuz that's not what it does on my install - if I want to do anything in Commander after exiting the game, I have to reopen the program. I always assumed that it shut itself down after launching the game's .exe file, it certainly shuts the window down by itself when the game loads on my rig. And all the changes that Commander should be making to the game are in there.

This may be a stupid question that doesn't need asking, and please don't take offense if it is

- but when you say you are using Commander to start SH3 - you do mean that you're clicking the check mark in the bottom right corner of the interface, the one that says "Launch SH3!" when you put the mouse cursor over it. Right?

Gargamel · 11-18-10, 12:03 AM

Quote:

Originally Posted by frau kaleun

Not sure what you mean by SH3 Commander continuing to run during the game - do you mean that when you launched the game from Commander and then exited the game, the Commander interface window would still be open just where you left it?

Cuz that's not what it does on my install - if I want to do anything in Commander after exiting the game, I have to reopen the program. I always assumed that it shut itself down after launching the game's .exe file, it certainly shuts the window down by itself when the game loads on my rig. And all the changes that Commander should be making to the game are in there.

This may be a stupid question that doesn't need asking, and please don't take offense if it is

- but when you say you are using Commander to start SH3 - you do mean that you're clicking the check mark in the bottom right corner of the interface, the one that says "Launch SH3!" when you put the mouse cursor over it. Right?

Yeah, i use the button.

Up until abotu a week ago, the SHC window stayed open in the background. Now it closes itself. And most (If not all) the changes i've made in SHC, like fatigue model, dont get applied. Since I've setup my crew to run on no fatigue (see other threads :P), this is really annoying.

EDIT: things like fatigue model and skip intro movies wasn't being applied.

I just turned off the auto-rollback feature, and SHC stayed up this time..... lets see if it works.

EDIT2: Ok it skipped the movies. Hopefully the rest of the changes will be made. Having not played in about a week due to this is getting annoying.

10-06-10, 03:03 PM	#1
FIREWALL Eternal Patrol Join Date: Mar 2006 Location: CATALINA IS. SO . CAL USA Posts: 10,108 Downloads: 511 Uploads: 0	Can't get Commander to work. Help JSC Problem... Commander opens to big on my screen. Can't drag screen far enough to tick Patrol button or any other buttons on bottom of screen. Computer : Laptop HP Pavilion 17" Widescreen Cpu 3.2 Intel DuoCore Ram DDR2 PC6400 4GB x 2 8GB total GPU Nividia 295 GTX OS Win7 Pro 64 bit Resolution set at 1024x768 SH3 Version w\o starforce and patched 1.4 Gwx 3.0 GWX plays fine solo. Anyboby have any ideas whats wrong ? __________________ RIP FIREWALL I Play GWX. Silent Hunter Who ???

10-06-10, 06:59 PM	#3
FIREWALL Eternal Patrol Join Date: Mar 2006 Location: CATALINA IS. SO . CAL USA Posts: 10,108 Downloads: 511 Uploads: 0	Hi JS I reinstalled SHC and Cfg files. My career Kpt shows but no buttons at bottom of screen. I can't take a screenshot as this Laptop is set up for offline gameing. No internet, antivirus... Nothing to run in background. There's nothing showing to tick to launch my career. No Rollback button or Setting Options button showing. If you can show me a screenshot I can tell you exactly whats not showing __________________ RIP FIREWALL I Play GWX. Silent Hunter Who ???

10-06-10, 11:11 PM	#4
rowi58 Eternal Patrol Join Date: Jun 2006 Location: Karlsruhe Posts: 679 Downloads: 56 Uploads: 0	Nothing is wrong. Jaeson Jones did a marvellous job with his JSGME. But it is to you – the user – to use it in the right way. For example, install JSGME in the right folder and give it the opportunity to connect to the SH3-installation (if you've got several installations of SH3, that means, for example, GWX 3.0 Gold, NYGM, LSH3 or WAC). Just “tell” JSGME where it must look for the program files. The installation routine will ask you. I have installed most of all “Super-Mods” mentioned above and didn't have any problem with JSGME. By the way – it's time to say “Thank You” again to Jeason Jones. It runs on a Desktop computer and a Laptop computer. Jeason – what would we have done without your program??? For my person, i must say: NOTHING. I could not work without JSGME. Greetings rowi58 __________________

11-17-10, 05:51 PM	#9
Gargamel Lucky Sailor Join Date: Oct 2010 Location: Rome Posts: 4,273 Downloads: 81 Uploads: 0	SHC shuts down after loading SH3 So I run SHC, everything seems ok. Then i use it to launch SH3, and SHC shutsdown. SH3 loads ok, but none of the settings from SHC are present. It used to stay open during the game. I don't remember changing anything that would affect this. I have reinstalled SHC. Any ideas? EDIT: Specs: (Sorry ) Win XP, C2D 1.6m 4gb Ram 7800 (?) GTX 1 tb Raid 5 drive array GWX - English Nav Map and Grid Refs GWX - Late War Sensors Snorkel Antennas GWX - 16km Atmosphere GWX - Enhanced Damage Effects GWX - Integrated Orders GWX_DFa-Flag&Pens_2010 GWX - Lite Harbor Traffic OLC's Modified Searchlight Beams for GWX3 Water_Stream_for_Uboats_V4 LifeBoats&Debris_v3B Longer Repair Times 2.04 (All) WB's Decks Awash + Fuel Economy Pato3000m GWX3.0 Additional_Ammo __________________ Luck is a residue of Design.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-06-10, 06:13 PM	#2
JScones Navy Seal Join Date: Apr 2005 Posts: 5,501 Downloads: 19 Uploads: 0	I responded to your PM three weeks ago. You haven't answered my questions?

11-17-10, 07:19 PM	#10
frau kaleun Rear Admiral Join Date: Nov 2009 Location: Skyri--oh who are we kidding, I'm probably at Lowe's. Again. Posts: 12,706 Downloads: 168 Uploads: 0	Not sure what you mean by SH3 Commander continuing to run during the game - do you mean that when you launched the game from Commander and then exited the game, the Commander interface window would still be open just where you left it? Cuz that's not what it does on my install - if I want to do anything in Commander after exiting the game, I have to reopen the program. I always assumed that it shut itself down after launching the game's .exe file, it certainly shuts the window down by itself when the game loads on my rig. And all the changes that Commander should be making to the game are in there. This may be a stupid question that doesn't need asking, and please don't take offense if it is - but when you say you are using Commander to start SH3 - you do mean that you're clicking the check mark in the bottom right corner of the interface, the one that says "Launch SH3!" when you put the mouse cursor over it. Right?