"cannot comply"....

dcb · 03-20-09, 02:32 PM

I just experienced the "cannot comply" thing 5 minutes ago. The reason was that I had removed all crew from the stern torp room, in order to man the deck gun with them.
The second I put them back into the stern torp room, the sub started complying again and the propellers began turning.
So, I guess you must have all compartments manned in order to make the sub move.

Bulkhead · 03-20-09, 07:06 PM

Well....im not sure, first: the XVIII dont have stern torp room, and the way i made it run was to apply the same numbers(S3D) to the hydrogen peroxide values i had in the diesel engines.....so what exactly is going on is a myst to me...
It obviously didnt have anything to do with the crew....

lurker_hlb3 · 03-20-09, 07:50 PM

The problem you are having is due to the configuration of the crew to run on a "port/starboard" rotation. However the system does not like the arrangement and thinks that the subs has no crew available due to fatigue. If you go to GQ ( Battle Stations ) it will temporally fix the problem.

Polman · 03-22-09, 07:03 AM

Hello,

Im playing Operation Monsun for some time now. First of all thnx for this great MOD, excelleng job, i used to be a stock player for a long time.

My problem: Everything was ok except some already known problems. Before some days i started a new patrol (January 25, 1943 with VIIC U-boat 150). The game starts but im unable to start engines.Cannot comply problem. Everything else seems to work fine I had OMV600, what i tried was:
-Ofc the battle stations thingy
-Dive, try to start with engines.
-I loaded a save i have done just before i entered base, no effect
-I even did again my last patrol, but again nothing at the new one.
-Tried to start with crew at conning tower and without
-Moved ppl around
-Installed OMV700 and patch3 when i was at base, again no effect.

Tbh im a little bit confused with conning tower and "Radio and listening rooms", but i had the same setup at my previous patrol so dunno whats wrong. Here is a SS from the sub management:

Thanx
P.S. Sry for my egnlish

lurker_hlb3 · 03-22-09, 09:28 AM

Quote:

Originally Posted by Polman

Hello,

Im playing Operation Monsun for some time now. First of all thnx for this great MOD, excelleng job, i used to be a stock player for a long time.

My problem: Everything was ok except some already known problems. Before some days i started a new patrol (January 25, 1943 with VIIC U-boat 150). The game starts but im unable to start engines.Cannot comply problem. Everything else seems to work fine I had OMV600, what i tried was:
-Ofc the battle stations thingy
-Dive, try to start with engines.
-I loaded a save i have done just before i entered base, no effect
-I even did again my last patrol, but again nothing at the new one.
-Tried to start with crew at conning tower and without
-Moved ppl around
-Installed OMV700 and patch3 when i was at base, again no effect.

Tbh im a little bit confused with conning tower and "Radio and listening rooms", but i had the same setup at my previous patrol so dunno whats wrong. Here is a SS from the sub management:

Thanx
P.S. Sry for my egnlish

If I understand correctly your trying to play a campaign from OMv600 on top of OMv700. If that is correct then your going to have to start a "new" campaign. There were some changes that were made to the Uboats themselves that is causing your problem. You will have to start a new campaign

Polman · 03-22-09, 09:38 AM

thnx for the reply.

i first encountered the problem with OMV600.
I had OMV700 but not installed. Wanted to do a full campaign first to see if i like it without a lot of realism and TMO.
I installed OMV700 as a try to fix it. But didnt solve it.

But i guess im starting a new one. But its rly strange why this happened. Since i only had OMV600 and patch, no other mod.

lurker_hlb3 · 03-22-09, 01:03 PM

Quote:

Originally Posted by Polman

thnx for the reply.

i first encountered the problem with OMV600.
I had OMV700 but not installed. Wanted to do a full campaign first to see if i like it without a lot of realism and TMO.
I installed OMV700 as a try to fix it. But didnt solve it.

But i guess im starting a new one. But its rly strange why this happened. Since i only had OMV600 and patch, no other mod.

This is the reason why your having the problems

http://www.subsim.com/radioroom/show...postcount=1160

03-20-09, 07:06 PM	#2
Bulkhead 中国水兵 Join Date: Sep 2007 Location: Norway, Hordaland Posts: 279 Downloads: 153 Uploads: 0	Well....im not sure, first: the XVIII dont have stern torp room, and the way i made it run was to apply the same numbers(S3D) to the hydrogen peroxide values i had in the diesel engines.....so what exactly is going on is a myst to me... It obviously didnt have anything to do with the crew.... __________________ KHJ

03-20-09, 07:50 PM	#3
lurker_hlb3 Admiral Join Date: Apr 2005 Location: San Diego Calif Posts: 2,290 Downloads: 187 Uploads: 12	The problem you are having is due to the configuration of the crew to run on a "port/starboard" rotation. However the system does not like the arrangement and thinks that the subs has no crew available due to fatigue. If you go to GQ ( Battle Stations ) it will temporally fix the problem. Last edited by lurker_hlb3; 03-20-09 at 08:52 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-20-09, 02:32 PM	#1
dcb Grey Wolf Join Date: Apr 2005 Location: Bucharest, Romania Posts: 845 Downloads: 544 Uploads: 0	I just experienced the "cannot comply" thing 5 minutes ago. The reason was that I had removed all crew from the stern torp room, in order to man the deck gun with them. The second I put them back into the stern torp room, the sub started complying again and the propellers began turning. So, I guess you must have all compartments manned in order to make the sub move.

03-22-09, 07:03 AM	#4
Polman Nub Join Date: Nov 2008 Posts: 2 Downloads: 8 Uploads: 0	Hello, Im playing Operation Monsun for some time now. First of all thnx for this great MOD, excelleng job, i used to be a stock player for a long time. My problem: Everything was ok except some already known problems. Before some days i started a new patrol (January 25, 1943 with VIIC U-boat 150). The game starts but im unable to start engines.Cannot comply problem. Everything else seems to work fine I had OMV600, what i tried was: -Ofc the battle stations thingy -Dive, try to start with engines. -I loaded a save i have done just before i entered base, no effect -I even did again my last patrol, but again nothing at the new one. -Tried to start with crew at conning tower and without -Moved ppl around -Installed OMV700 and patch3 when i was at base, again no effect. Tbh im a little bit confused with conning tower and "Radio and listening rooms", but i had the same setup at my previous patrol so dunno whats wrong. Here is a SS from the sub management: Thanx P.S. Sry for my egnlish

03-22-09, 09:38 AM	#6
Polman Nub Join Date: Nov 2008 Posts: 2 Downloads: 8 Uploads: 0	thnx for the reply. i first encountered the problem with OMV600. I had OMV700 but not installed. Wanted to do a full campaign first to see if i like it without a lot of realism and TMO. I installed OMV700 as a try to fix it. But didnt solve it. But i guess im starting a new one. But its rly strange why this happened. Since i only had OMV600 and patch, no other mod.