USB 2.0 Question

[XabbaRus]

My PC is only a few months old, and has 7 USB porst 3 Front and 4 back.

Now using Sandra I see that it is saying nothing is connected to my USB 2.0 ports though I have a couple of devices connected to the ports in the back and my joystick to the front one.

I thought all the ports would be USB 2.0 capable but I look in System>Hardware and there is the USB 2.0 bus controller and the older USB 1.1.

WTF Are all my ports USB 2.0 or only some of them.

In BIOS I have USB 2.0 enabled. argh.....

Help...

Oh and I have only one device my Modem plugged into the back.

Some info

SiSoftware Sandra

General Information
Controller : Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C

Root Hub
Compound Device : No
Hub Is Bus Powered : No
Power Switching : Gang-switched
Over-current Protection : Global
Number of Ports : 8

Root Hub: USB Port 1
Status : No Device Connected

Root Hub: USB Port 2
Status : No Device Connected

Root Hub: USB Port 3
Status : No Device Connected

Root Hub: USB Port 4
Status : No Device Connected

Root Hub: USB Port 5
Status : No Device Connected

Root Hub: USB Port 6
Status : Device Connected
Device Connected to Port : USB Composite Device
OEM Device Name : Seiko Epson Corp. ??? (0803)
Device Version : 1.00
Device ID : VEN_04B8, DEV_0803, PRT_00
USB Version : 2.00
Speed : High (480Mbps)
Configuration Settings : 1
Open Pipes : 4
Transfer Type : Bulk
Data Packet Size : 64 byte(s)

Root Hub: USB Port 7
Status : No Device Connected

Root Hub: USB Port 8
Status : No Device Connected

Ok that is with my Printer plugged into one of the front ports

SiSoftware Sandra

General Information
Controller : Intel(R) 82801FB/FBM USB Universal Host Controller - 265B

Root Hub
Compound Device : No
Hub Is Bus Powered : No
Power Switching : None
Over-current Protection : Individual
Number of Ports : 2

Root Hub: USB Port 1
Status : No Device Connected

Root Hub: USB Port 2
Status : No Device Connected


>>>>>>>>>>>>>>>>

SiSoftware Sandra

General Information
Controller : Intel(R) 82801FB/FBM USB Universal Host Controller - 265A

Root Hub
Compound Device : No
Hub Is Bus Powered : No
Power Switching : None
Over-current Protection : Individual
Number of Ports : 2

Root Hub: USB Port 1
Status : No Device Connected

Root Hub: USB Port 2
Status : No Device Connected

>>>>>>>>>>>>>>>>>>>>>>

SiSoftware Sandra

General Information
Controller : Intel(R) 82801FB/FBM USB Universal Host Controller - 2659

Root Hub
Compound Device : No
Hub Is Bus Powered : No
Power Switching : None
Over-current Protection : Individual
Number of Ports : 2

Root Hub: USB Port 1
Status : Device Connected
Device Connected to Port : SpeedTouch 330 ADSL Modem
OEM Device Name : Alcatel Telecom Speed Touch ISDN or ADSL Modem
Device Version : 4.00
Device ID : VEN_06B9, DEV_4061, PRT_00
USB Version : 1.10
Speed : Full (12Mbps)
Configuration Settings : 1
Open Pipes : 6
Transfer Type : Interrupt
Data Packet Size : 8 byte(s)

Root Hub: USB Port 2
Status : Device Connected
Device Connected to Port : USB Mass Storage Device (Don't know what this is)
OEM Device Name : Alcor Micro Corp. ??? (9360)
Device Version : 1.00
Device ID : VEN_058F, DEV_9360, PRT_00
USB Version : 1.10
Speed : Full (12Mbps)
Configuration Settings : 1
Open Pipes : 2
Transfer Type : Bulk
Data Packet Size : 8 byte(s)

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

SiSoftware Sandra

General Information
Controller : Intel(R) 82801FB/FBM USB Universal Host Controller - 2658

Root Hub
Compound Device : No
Hub Is Bus Powered : No
Power Switching : None
Over-current Protection : Individual
Number of Ports : 2

Root Hub: USB Port 1
Status : Device Connected
Device Connected to Port : Saitek Cyborg Evo
OEM Device Name : Saitek PLC ??? (0464)
Device Version : 1.11
Device ID : VEN_06A3, DEV_0464, PRT_00
USB Version : 2.00
Speed : Low (1.5Mbps)
Configuration Settings : 1
Open Pipes : 1
Transfer Type : Interrupt
Data Packet Size : 8 byte(s)

Root Hub: USB Port 2
Status : No Device Connected