![]() |
SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997 |
![]() |
#1 |
Grey Wolf
![]() Join Date: May 2006
Location: BA8758, or FN33eh for my fellow hams.
Posts: 833
Downloads: 0
Uploads: 0
|
![]()
Hopefully, this will be of use to you guys who play SHIV as a way to communicate in a more immersive way.
I decided to built a strip version of the US Navy CSP-488 "Wheel Cipher". The CSP-488 was the Navy designation of the US Army M-94 wheel cipher. Any wheel cipher can be turned into a strip cipher quite easily by "unrolling" the wheels, and doubling the mixed alphabets of each wheel on the individual strips. The CSP-488 wheel cipher was used up until 1942 or 1943, and it was replaced by the more secure CSP-845 strip cipher, which had 100 strips to choose from and 30 positions for enciphering. I chose to make a strip version of the CSP-488 though, because you only have to worry about setting up and cutting out 25 strips, not 100. Anyway, here it is: ![]() You can tell the device was first invented for use by the Army. If you look down the strip that is marked 'R17' at the top, you will notice that part of the alphabet reads "ARMYOFTHEUS". Wonder if that got on the nerves of Navy radiomen who had to use it to encipher! How it works is that you set up the strips in a pre-arranged manner, according to a keylist. In this case, the 25 strips are ordered as follows: YNXWSZJGFQRDVMTOHUPLEKICB Once we've set the strips in the proper order, we slide the individual strips up and down until our desired plaintext is visible. Let's use 'SEND LAWYERS GUNS AND MONEY' as our plaintext: ![]() I put the plaintext at the top of the bottom retention strip. Admittedly, it's an unlikely message for a US Navy sub to send, unless of course it's the USS Sea Tiger. I padded it out with two X's to make the message exactly 25 letters long. You can pull the ciphertext from any line above. Lets say you pick the line 10 down from the bottom of the top retention strip. It reads like this: DMWQIJIVUKIFABOQDXGKBMIFG An operator would seperate that into groups, probably 5 letter groups, so it would look like this when sent: DMWQI JIVUK IFABO QDXGK BMIFG For a message longer than 25 characters, you would repeat the same procedure for each 25 character 'chunk' of plaintext, but you would generally chose a different line of ciphertext for each 25 character block. It doesn't matter which one you choose, as they will all result in the same plaintext, which 'jumps out' at you because it's the only intelligible result. Construction notes: The strips were individually typed into columns in an EXCEL spreadsheet based upon the wheel information found at the USS Pampanito website: http://www.maritime.org/csp488.htm They were then printed out on heavy cardstock and seperated using my wife's cutting board, my pocket knife, and a metal yardstick as a guide for the knife blade. The strip holder is a piece of heavy cardstock with two sets of parallel cuts to hold the strips. The US Navy CSP-845 strip cipher is vertically oriented instead of horizontally like my device, but I find that the horizontal orientation is more intuitive, and you can use the retaining strips as a guide.
__________________
The U-Boat Commander of Love |
![]() |
![]() |
|
|