[WIP]F4U1 Corsair - Page 6

gimpy117 · 11-28-08, 10:22 PM

any news??? is this dead??

Hylander_1314 · 11-28-08, 11:03 PM

The F4U 1 was the "Birdcage" model

The F4U 1a incorporated the "blown" hood with two frames across the top. Plus it also had more modifications to improve the design, and also used a triangular shaped wedge about 8 inches long on the leading edge of the starboard[?] wing to make both wings stall at the same time so it was easier to land on a carrier deck. The oleo struts on the main landing gear had to be worked out to eliminate the bounce that plagued the early models, but was eventually worked out on the 1a model.

Admiral Von Gerlach · 11-28-08, 11:07 PM

I hope this plane can be included in the Pacfic campaigns, how is it progressing?

gimpy117 · 11-28-08, 11:33 PM

Quote:

Originally Posted by Admiral Von Gerlach

I hope this plane can be included in the Pacfic campaigns, how is it progressing?

unless work has progressed in the shadows...not at all...

Sledgehammer427 · 11-29-08, 12:47 AM

SHips...Modeling...DELFTSHIP!!!

I don't have the site link on hand, but i am using it to make a hull for a Fremantle Class PT (special REquest)

oh, bugger, i missed the last 4 pages, but, Privateer, i would insist you look into this proggy, its beautiful (to the overworked modeler)

Anvart · 11-29-08, 06:35 PM

:rotfl:

I already wrote about it ...
Free (for DELFTship DL registration is necessary):
http://www.delftship.net/delftship/index.php?option=com_content&view=category&layout= blog&id=13&Itemid=2&d7dc2058cb2ba61b6d2228e9f53c3e 3c=f0d567007b5236e52871f7f51fbacb69
http://www.delftship.net/index.php?option=com_docman&Itemid=36
http://www.delftship.net/delftship/index.php?option=com_wrapper&view=wrapper&Itemid=1 8
http://freeship-plus.land.ru/downloads.html
...
Not free:
http://www.proteusengineering.com/basic.htm
For Rhinoceros:
http://www.orca3d.com/
http://www.rhinomarine3d.com/
http://www.rhino3d.com/
...
Standalone:
http://www.proteusengineering.com/fastship.htm
http://cadcam.autoship.com/cadproduc...amoverview.htm
... and so on ...

gimpy117 · 11-30-08, 01:04 AM

nice looking boat...when can I sink it??

11-30-08, 06:18 PM

Anvart,

You should leave the post as is.
Very nice!

And no, I've not stopped doing My Corsair.
I've just got other things to complete 1st.

Anvart · 12-01-08, 03:00 PM

Hi.
You think, that my post should not be deleted?
If it is necessary and useful I will leave it ...

12-01-08, 08:40 PM

Anvart,

I think they are pretty good links should some wish to follow them.
I had FreeShip for a time.
I have not re-installed since the last Crash.
What is NeverCenter Silo?
:hmm:

Nevermind.
I found it.
I think I'll give it a try.
And the Professional version is not a bad price should I buy it.

Anvart · 12-02-08, 10:29 AM

I think Modo 302 is better then Silo ...
3DSMax, it is the program habitual for me, but it one is not sufficient for a full cycle of designing and I try various programs for pipeline ...
...
and look PM.

P.S.
Clear PM box ...

P.P.S.
Not bad news:
http://www.digimation.com/home/Software.aspx?sm=ds
http://splutterfish.com/sf/WebContent/BlurPack .... (Blurlib.dlu is necessary) ...

12-02-08, 06:05 PM

Very Nice links.

And Thank You!

PM's are cleared.

Bramtyr · 02-01-09, 11:10 PM

Woah, I didn't know Rhinoceros was still around and being developed. I have two years work experience with that program back in the day. I'll have to try a fresh version, and see if i still remember it.

On another note, I've been looking to see if anyone has replaced the crappy models for the US aircraft loadout in SH4, but i'm not seeing any mods about it with [Rel] tags... am I missing/overlooking something? If not, I wan't to try and take a gander at it.

11-28-08, 10:22 PM	#76
gimpy117 Ocean Warrior Join Date: Jul 2007 Location: Kalamazoo, MI Posts: 3,243 Downloads: 108 Uploads: 0	any news??? is this dead?? __________________ Member of the Subsim Zombie Army

11-28-08, 11:03 PM	#77
Hylander_1314 Sea Lord Join Date: May 2006 Location: 5 Miles Inland West Of Lake Huron Posts: 1,936 Downloads: 139 Uploads: 0	The F4U 1 was the "Birdcage" model The F4U 1a incorporated the "blown" hood with two frames across the top. Plus it also had more modifications to improve the design, and also used a triangular shaped wedge about 8 inches long on the leading edge of the starboard[?] wing to make both wings stall at the same time so it was easier to land on a carrier deck. The oleo struts on the main landing gear had to be worked out to eliminate the bounce that plagued the early models, but was eventually worked out on the 1a model. __________________ A legislative act contrary to the Constitution is not law. -John Marshall Chief Justice of the Supreme Court ---------------------

11-28-08, 11:07 PM	#78
Admiral Von Gerlach Seasoned Skipper Join Date: Nov 2008 Location: Colorado and California Posts: 726 Downloads: 358 Uploads: 0	I hope this plane can be included in the Pacfic campaigns, how is it progressing? __________________ Erlaubnis an Bord zu kommen.

11-29-08, 12:47 AM	#80
Sledgehammer427 PacWagon Join Date: Jun 2007 Location: Drinking coffee and staring at trees in Massachusetts Posts: 2,908 Downloads: 287 Uploads: 0	SHips...Modeling...DELFTSHIP!!! I don't have the site link on hand, but i am using it to make a hull for a Fremantle Class PT (special REquest) oh, bugger, i missed the last 4 pages, but, Privateer, i would insist you look into this proggy, its beautiful (to the overworked modeler) __________________ Cold Waters Voice Crew - Fire Control Officer Cmdr O. Myers - C/O USS Nautilus (SS-168) 114,000 tons sunk - 4 Spec Ops completed V-boat Nutcase - Need supplies? Japanese garrison on a small island in the way? Just give us a call! D4C! Last edited by Sledgehammer427; 11-29-08 at 12:50 AM.

11-29-08, 06:35 PM	#81
Anvart Admiral Join Date: Jan 2006 Location: Russia ® Posts: 2,492 Downloads: 122 Uploads: 1	:rotfl: I already wrote about it ... Free (for DELFTship DL registration is necessary): http://www.delftship.net/delftship/index.php?option=com_content&view=category&layout= blog&id=13&Itemid=2&d7dc2058cb2ba61b6d2228e9f53c3e 3c=f0d567007b5236e52871f7f51fbacb69 http://www.delftship.net/index.php?option=com_docman&Itemid=36 http://www.delftship.net/delftship/index.php?option=com_wrapper&view=wrapper&Itemid=1 8 http://freeship-plus.land.ru/downloads.html ... Not free: http://www.proteusengineering.com/basic.htm For Rhinoceros: http://www.orca3d.com/ http://www.rhinomarine3d.com/ http://www.rhino3d.com/ ... Standalone: http://www.proteusengineering.com/fastship.htm http://cadcam.autoship.com/cadproduc...amoverview.htm ... and so on ... __________________ Alex ® Moses said: "Don't create yourself an idol"... Last edited by Anvart; 12-17-08 at 04:45 AM.

11-30-08, 01:04 AM	#82
gimpy117 Ocean Warrior Join Date: Jul 2007 Location: Kalamazoo, MI Posts: 3,243 Downloads: 108 Uploads: 0	nice looking boat...when can I sink it?? __________________ Member of the Subsim Zombie Army

11-30-08, 06:18 PM	#83
Madox58 Stowaway Posts: n/a Downloads: Uploads:	Anvart, You should leave the post as is. Very nice! And no, I've not stopped doing My Corsair. I've just got other things to complete 1st.

12-01-08, 03:00 PM	#84
Anvart Admiral Join Date: Jan 2006 Location: Russia ® Posts: 2,492 Downloads: 122 Uploads: 1	Hi. You think, that my post should not be deleted? If it is necessary and useful I will leave it ... __________________ Alex ® Moses said: "Don't create yourself an idol"...

12-01-08, 08:40 PM	#85
Madox58 Stowaway Posts: n/a Downloads: Uploads:	Anvart, I think they are pretty good links should some wish to follow them. I had FreeShip for a time. I have not re-installed since the last Crash. What is NeverCenter Silo? :hmm: Nevermind. I found it. I think I'll give it a try. And the Professional version is not a bad price should I buy it. Last edited by Madox58; 12-01-08 at 08:44 PM.

12-02-08, 10:29 AM	#86
Anvart Admiral Join Date: Jan 2006 Location: Russia ® Posts: 2,492 Downloads: 122 Uploads: 1	I think Modo 302 is better then Silo ... 3DSMax, it is the program habitual for me, but it one is not sufficient for a full cycle of designing and I try various programs for pipeline ... ... and look PM. P.S. Clear PM box ... P.P.S. Not bad news: http://www.digimation.com/home/Software.aspx?sm=ds http://splutterfish.com/sf/WebContent/BlurPack .... (Blurlib.dlu is necessary) ... __________________ Alex ® Moses said: "Don't create yourself an idol"... Last edited by Anvart; 12-03-08 at 04:47 AM.

12-02-08, 06:05 PM	#87
Madox58 Stowaway Posts: n/a Downloads: Uploads:	Very Nice links. And Thank You! PM's are cleared.

02-01-09, 11:10 PM	#88
Bramtyr Sailor man Join Date: Aug 2008 Posts: 43 Downloads: 19 Uploads: 0	Woah, I didn't know Rhinoceros was still around and being developed. I have two years work experience with that program back in the day. I'll have to try a fresh version, and see if i still remember it. On another note, I've been looking to see if anyone has replaced the crappy models for the US aircraft loadout in SH4, but i'm not seeing any mods about it with [Rel] tags... am I missing/overlooking something? If not, I wan't to try and take a gander at it.