[WIP] Candy for the eyes VII-D Playabel

Originally Posted by schnorchel

Hi All,
As what I have stated, I divided this test into 3 cells - Tomi's 7c3, My 7C3 and stock 7C3. test each cell 3 times. same result as I mentioned on each time. Only the stock 7C3 can successfully hide @ periscope depth in silent run mode without being detected by the DDs. Do not test IXC yet. It seems that even the small touch to the 3d data file can affect the the detectable charactor.

Have you figured out why this is yet?

[Tomi_099]

Originally Posted by privateer

Have you figured out why this is yet?

-------------------------------------------------------

Only the stock 7C3 can successfully hide @
I dont no !!!
I have shortened the aerial( antene ) , I believe this is another problem!!!

[schnorchel]

Hi Kaleuns,

Here I must do an apologize for what I declared previously. I redo the test for each of 2 type mods of 7c3 and stock 7c3 5 times in last week and found that all type has possibility to be detected by the DD @ the periscope depth and if Tomi's 7c3 is set to14m the DD will not fire their gun.

But now I experience another problem on Tomi's 7c3. I can not start a fresh new campaign from 1943 with this beauty. each time after came into loading process it gets CTD (no other Mod is implemented, just over clear GWX2.0). Found that no problem with1944 campaign.

If you increase any model part.
Say an antenna is a bit higher then stock.
You increase the Bounding Box the Game "Sees".
All may appear correct to our eyes but!
Not to the Game Engine.
We see things differently.

Originally Posted by Lord_Kitchener

...What is the reason for this post? Comments like this are what gives these foreigners the impression that we are barbaric idiots!

keep your hands at the level of your eyes

[Tomi_099]

Originally Posted by schnorchel

Hi Kaleuns,

Here I must do an apologize for what I declared previously. I redo the test for each of 2 type mods of 7c3 and stock 7c3 5 times in last week and found that all type has possibility to be detected by the DD @ the periscope depth and if Tomi's 7c3 is set to14m the DD will not fire their gun.

But now I experience another problem on Tomi's 7c3. I can not start a fresh new campaign from 1943 with this beauty. each time after came into loading process it gets CTD (no other Mod is implemented, just over clear GWX2.0). Found that no problem with1944 campaign.

---------------------------------------------------
But now I experience another problem on Tomi's 7c3. I can not start a fresh new campaign from 1943 with this beauty. each time after came into loading process it gets CTD (no other Mod is implemented, just over clear GWX2.0). Found that no problem
with1944 campaign.
.................................................. .........
Can you Tell me ?? - yor PC Performens !!! - :hmm:

...... campaign from 1943 :hmm: ~ ( campaign from 1944/1945 ) i think o.k

[Tomi_099]

So, Privateer !!!
I have thought!!!

- Bounding box –
-
- Logically a point reaches beyond the area which is not visible,
so if to itself a point in the Game, however,
is beyond the Objekt to be located by a destroyer.

Even if the Bounding box there is bigger than the model, becomes the edge of the Bounding box as a model recognised:hmm:


Is it what you would like to say to me??:hmm:

PS:
This seems to me logical and absolutely possible, this lasts more fatal - "error" - many have done, because one the Bounding box as only one green edge is to be recognised.
And because the Bounding box greater than modell is - yas!!! - this could be possible .-

[schnorchel]

Originally Posted by Tomi_099

---------------------------------------------------
But now I experience another problem on Tomi's 7c3. I can not start a fresh new campaign from 1943 with this beauty. each time after came into loading process it gets CTD (no other Mod is implemented, just over clear GWX2.0). Found that no problem
with1944 campaign.
.................................................. .........
Can you Tell me ?? - yor PC Performens !!! - :hmm:

...... campaign from 1943 :hmm: ~ ( campaign from 1944/1945 ) i think o.k

Hi Tomi,

Don't know what you mean about the PC performence. Sorry for my bad english . Could any good english speaker can help to get it more clear? But your last sentence is comfirmed:...... campaign from 1943 get Crash to desktop ~ ( campaign from 1944/1945 ) is o.k

[Wolfehunter]

Originally Posted by schnorchel

Hi Tomi,

Don't know what you mean about the PC performence. Sorry for my bad english . Could any good english speaker can help to get it more clear? But your last sentence is comfirmed:...... campaign from 1943 get Crash to desktop ~ ( campaign from 1944/1945 ) is o.k

He wants to know what are your PC specs. Can you show the CTD error message also?

[schnorchel]

Originally Posted by Wolfehunter

He wants to know what are your PC specs. Can you show the CTD error message also?

Thanks for Wolfehunter's explaination!
Tomi,
Regarding the PC spec, Do you mean i.e. core2-6700, 4G Ram something like that?
Regarding CTD error message, No error message shown after CTD. Or the SH3 has a funtion that can create an error txt file somewhere? I dont know.

[Tomi_099]

Originally Posted by schnorchel

Thanks for Wolfehunter's explaination!
Tomi,
Regarding the PC spec, Do you mean i.e. core2-6700, 4G Ram something like that?
Regarding CTD error message, No error message shown after CTD. Or the SH3 has a funtion that can create an error txt file somewhere? I dont know.

------------------

core2-6700, 4G Ram
that’s my performers to !!!
I think that is no problem!!

The problem is in the config from the Sub.
VIIc /41 – ( Coning Tower 3 ) activity in the equcment ( datum )
Look this an changed them.

[schnorchel]

Originally Posted by Tomi_099

------------------

core2-6700, 4G Ram
that’s my performers to !!!
I think that is no problem!!

The problem is in the config from the Sub.
VIIc /41 – ( Coning Tower 3 ) activity in the equcment ( datum )
Look this an changed them.

So Tomi, Does that mean that you experience the same problem on you own computer?

[schnorchel]

Can not find the turm7c3 in NSS_Uboat7c41.eqp
But can find it in NSS_Uboat7c.eqp.
Do you mean the line"StartDate" in the section below in this file?

third coning with 3 AA mounts, 2 twin 20mm, 1 single 37mm
[Equipment 3]
NodeName=Z01
LinkName=data/objects/Turm7c_3_hd
StartDate=19440101
EndDate=19451231

I think the date here is same to that in stock version.
Have changed it to StartDate=19430101 and try to load get same result - CTD

[Tomi_099]

Originally Posted by schnorchel

So Tomi, Does that mean that you experience the same problem on you own computer?

-----

If it this only grind is lasts e long to the program beginning,
and sometimes gives e a black screen. and then Programm-cresh .
So thets only by the first Time or first Start.
Given the PC a little Time.

. If a Campagne Beginning it is not because of the Equcment Config.
. Because most Campagnes in 1939 starting, the VIIc / 41 there was not at this time, therefore the boat is mostly in 1945 to plays. The best one prove is the single mission, how said this

However, this lies with the Equcment file the Turm3 only from a certain date responds.
Man can change the Equcment By hand with text editor then one is able to do (date), boot also to 1939 plays.
Unfortunately, I am able to do it at the moment not figuratively pointing because I am not at home .
When you Started Champagne at 1939 the Programme - Load Turm1 ( I Rework Turm3) First from GWX2.0 Folder to my Hull.

[schnorchel]

The way I try to play your 7c3 in 1943 is to start a campaign and then go to shipyard to upgrade the conning tower. then start the mission then CTD.