can't seem to refit/end partol

Capt. Shark Bait · 05-17-07, 12:39 AM

there's been no base change yet and there's one incomplete from after a previous refit(?). i had reported contact of a small convoy, tho it wasn't listed as that, and proceeded against it. sank 3 destroyers and 6 transports of various sizes with torpedos and the deck gun. the convoy consisted of 3 destroyers and 6 transports of various sizes. so, after all that, and putting my last 15 AP shells into a large liner, i set a course to RTB which is what i was advised to do when reporting the convoy. now that i'm back i can't rearm or end the patrol. looked at a coupla save in notepad and there's nothing about a base change and it should stuill be manila/cavite. put along side a pier at cavite and still nothing, even after reloading the save. gonna see what happens now when i go back in after leaving and saving. any ideas? thx

edit: tried a save before sinking the convoy but still in contact with it, had having sunk 2 DDs, i RTB and was able to end the patrol and dock. now i don't get the whole d@mm convoy

ReallyDedPoet · 05-17-07, 06:47 AM

Bump

RDP

AVGWarhawk · 05-17-07, 08:23 AM

Possible Manilla has fallen and no one bothered to tell you. I recommend going to Java.

Capt. Shark Bait · 05-17-07, 12:54 PM

thx, poet. nope manila hadn't fallen yet

FIREWALL · 05-17-07, 01:12 PM

This has popped up in some other threads too. This needs to be looked at harder as it might have been forgotten or not finished by UBI devs.

I mean the none notification of base changes. To have to go base by base till you find the right base to end patrol is a pain.

Hope this gets squared away soon.

MaxT.dk · 05-17-07, 01:16 PM

Someone posted a solution to that.
The port where you should dock is saved in some of the files in your last savegame. The man who wrote about it even mentioned the filename and what to look for. It was posted either on this main forum, or in SH4 MOD forum. Have fun searching.

darkfin · 05-17-07, 02:38 PM

Check here:

http://www.subsim.com/radioroom/show...rick+home+port

MaxT.dk · 05-17-07, 02:53 PM

That was the one! Thnx darkfin

Capt. Shark Bait · 05-17-07, 10:10 PM

i already looked at that file and it showed no change of port. i found that thread in a search

Schnee · 05-17-07, 10:27 PM

I've been cruising around Australia trying to dock - the last occurance of the base change shows PEARL HARBOUR!!!! Of all places.

Damn, thats going to be a loooong trip!

MaxT.dk · 05-18-07, 03:37 AM

If you had your base at Brisbane in Australia, dock at the other side of Australia at Fremantile.

Usually it goes like this:
Pearl Harbour > Brisbane > Fremantile > MOTHBALLED! :rotfl:

Rhodes · 05-18-07, 09:50 AM

Quote:

Originally Posted by MaxT.dk

If you had your base at Brisbane in Australia, dock at the other side of Australia at Fremantile.

Usually it goes like this:
Pearl Harbour > Brisbane > Fremantile > MOTHBALLED! :rotfl:

Happend to me yesterday. When arriveing in Fremantile, my old classe sub, Balao, was mothballed because it was old, 6 moths old and then, they discard a CMOH and a bronze star plus a purple heart winner skipper.
It's a living... :p

MaxT.dk · 05-18-07, 10:19 AM

Hehe :P

There's a solution for it, but it's manual. If you want to continue your career, look here:
http://www.subsim.com/radioroom/show...4&postcount=33

Have fun

hamburger · 05-18-07, 10:34 AM

wrong thread, sorry...

05-17-07, 12:39 AM	#1
Capt. Shark Bait Ace of the Deep Join Date: Apr 2007 Location: in a convergance zone Posts: 1,186 Downloads: 3 Uploads: 0	can't seem to refit/end partol there's been no base change yet and there's one incomplete from after a previous refit(?). i had reported contact of a small convoy, tho it wasn't listed as that, and proceeded against it. sank 3 destroyers and 6 transports of various sizes with torpedos and the deck gun. the convoy consisted of 3 destroyers and 6 transports of various sizes. so, after all that, and putting my last 15 AP shells into a large liner, i set a course to RTB which is what i was advised to do when reporting the convoy. now that i'm back i can't rearm or end the patrol. looked at a coupla save in notepad and there's nothing about a base change and it should stuill be manila/cavite. put along side a pier at cavite and still nothing, even after reloading the save. gonna see what happens now when i go back in after leaving and saving. any ideas? thx edit: tried a save before sinking the convoy but still in contact with it, had having sunk 2 DDs, i RTB and was able to end the patrol and dock. now i don't get the whole d@mm convoy __________________ Leiser und tödlicher edler Ritter der Tiefe Corsair Vengeance M70; ASUS Crosshair V Formula-Z; FX 8350; Asus 7870; Samsung SyncMaster 2243SWX; coolmax CUG950B 950w psu; 8GB Kingston HyperX DDR3; Corsair M4 SSD 128GB, WD 1TB; x18 DVR212D; 7SP1 Last edited by Capt. Shark Bait; 05-17-07 at 01:08 AM.

05-17-07, 06:47 AM	#2
ReallyDedPoet Canadian Wolf Join Date: Jul 2006 Location: Canada. The one and only, East Coast Posts: 10,884 Downloads: 946 Uploads: 5	Bump RDP __________________ Back in the Day

05-17-07, 08:23 AM	#3
AVGWarhawk Lucky Jack Join Date: Jun 2005 Location: In a 1954 Buick. Posts: 28,253 Downloads: 90 Uploads: 0	Possible Manilla has fallen and no one bothered to tell you. I recommend going to Java. __________________ “You're painfully alive in a drugged and dying culture.” ― Richard Yates, Revolutionary Road

05-17-07, 12:54 PM	#4
Capt. Shark Bait Ace of the Deep Join Date: Apr 2007 Location: in a convergance zone Posts: 1,186 Downloads: 3 Uploads: 0	thx, poet. nope manila hadn't fallen yet __________________ Leiser und tödlicher edler Ritter der Tiefe Corsair Vengeance M70; ASUS Crosshair V Formula-Z; FX 8350; Asus 7870; Samsung SyncMaster 2243SWX; coolmax CUG950B 950w psu; 8GB Kingston HyperX DDR3; Corsair M4 SSD 128GB, WD 1TB; x18 DVR212D; 7SP1

05-17-07, 01:12 PM	#5
FIREWALL Eternal Patrol Join Date: Mar 2006 Location: CATALINA IS. SO . CAL USA Posts: 10,108 Downloads: 511 Uploads: 0	This has popped up in some other threads too. This needs to be looked at harder as it might have been forgotten or not finished by UBI devs. I mean the none notification of base changes. To have to go base by base till you find the right base to end patrol is a pain. Hope this gets squared away soon. __________________ RIP FIREWALL I Play GWX. Silent Hunter Who ???

05-17-07, 01:16 PM	#6
MaxT.dk Rough night at Langtrees brothel Join Date: Mar 2007 Posts: 480 Downloads: 0 Uploads: 0	Someone posted a solution to that. The port where you should dock is saved in some of the files in your last savegame. The man who wrote about it even mentioned the filename and what to look for. It was posted either on this main forum, or in SH4 MOD forum. Have fun searching. __________________ http://maxt.dk/archives/2007/03/22/s...nter-4-cheats/ Get KillerSub MOD and bring the Hell back to Earth! The FUN way to play SH4! Now with Rail Guns!

05-17-07, 02:38 PM	#7
darkfin Loader Join Date: Sep 2006 Location: Sneaking up on a carrier Posts: 83 Downloads: 78 Uploads: 0	Check here: http://www.subsim.com/radioroom/show...rick+home+port

05-17-07, 02:53 PM	#8
MaxT.dk Rough night at Langtrees brothel Join Date: Mar 2007 Posts: 480 Downloads: 0 Uploads: 0	That was the one! Thnx darkfin __________________ http://maxt.dk/archives/2007/03/22/s...nter-4-cheats/ Get KillerSub MOD and bring the Hell back to Earth! The FUN way to play SH4! Now with Rail Guns!

05-17-07, 10:10 PM	#9
Capt. Shark Bait Ace of the Deep Join Date: Apr 2007 Location: in a convergance zone Posts: 1,186 Downloads: 3 Uploads: 0	i already looked at that file and it showed no change of port. i found that thread in a search __________________ Leiser und tödlicher edler Ritter der Tiefe Corsair Vengeance M70; ASUS Crosshair V Formula-Z; FX 8350; Asus 7870; Samsung SyncMaster 2243SWX; coolmax CUG950B 950w psu; 8GB Kingston HyperX DDR3; Corsair M4 SSD 128GB, WD 1TB; x18 DVR212D; 7SP1

05-17-07, 10:27 PM	#10
Schnee Engineer Join Date: Oct 2005 Posts: 209 Downloads: 2 Uploads: 0	Thanks! I've been cruising around Australia trying to dock - the last occurance of the base change shows PEARL HARBOUR!!!! Of all places. Damn, thats going to be a loooong trip!

05-18-07, 03:37 AM	#11
MaxT.dk Rough night at Langtrees brothel Join Date: Mar 2007 Posts: 480 Downloads: 0 Uploads: 0	If you had your base at Brisbane in Australia, dock at the other side of Australia at Fremantile. Usually it goes like this: Pearl Harbour > Brisbane > Fremantile > MOTHBALLED! :rotfl: __________________ http://maxt.dk/archives/2007/03/22/s...nter-4-cheats/ Get KillerSub MOD and bring the Hell back to Earth! The FUN way to play SH4! Now with Rail Guns!

05-18-07, 10:19 AM	#13
MaxT.dk Rough night at Langtrees brothel Join Date: Mar 2007 Posts: 480 Downloads: 0 Uploads: 0	Hehe :P There's a solution for it, but it's manual. If you want to continue your career, look here: http://www.subsim.com/radioroom/show...4&postcount=33 Have fun __________________ http://maxt.dk/archives/2007/03/22/s...nter-4-cheats/ Get KillerSub MOD and bring the Hell back to Earth! The FUN way to play SH4! Now with Rail Guns!

05-18-07, 10:34 AM	#14
hamburger Loader Join Date: May 2005 Location: Hamburg-Germany Posts: 85 Downloads: 6 Uploads: 0	wrong thread, sorry...