HELP Grey Wolf Mod 1.1 HELP!!!

twotone · 02-02-07, 02:41 PM

I went to here http://www.subsim.com/subsim_files/patches2005.html downloaded the Grey Wolves SuperMod v1.1 (5 files and an exe file) Numerous improvements and fixes. i then uninstalled my full game of SH III, and re-booted my system and re-installed SH III and the Patch to silent_hunter_3_dvd_1.4b_us i then installed the Grey Wolves SuperMod v1.1 and tryed to play. The game runs good but when i go into any mission no mater if its a Career or single mission i have 2 big problems.

1) NO Deck gun ammo - the Flak 88 and or the larger gun never have any ammo load out. The smaller AA guns do however have full ammo.

2) In un-moded ver. when you go to free camera mode and you hover out of the water above yoru sub and yoru sub is submerged, you could see an orange circle with a direction arrow pointing in the direction of your heading on on top of the water. but after you MOD it is gone. I really really reaally need this.

file names on files:
silent_hunter_3_dvd_1.4b_us

(((Note i have done the un-install and reinstall 3 times same problems)))

bigboywooly · 02-02-07, 02:46 PM

Hi and welcome to Subsim

The orange marker is in C:\Program Files\Ubisoft\SilentHunterIII\data\Misc and is called Umark
You can copy it across from the stock version and add into the directory above

How do you mean no deckgun ammo ?
Did you click on a shell to load it ?

Abd_von_Mumit · 02-02-07, 02:49 PM

I can't believe bigboywooly didn't mention that, but why don't try try rather Grey Wolves Expansion instead of 1.1 version? GWX is a newer version and is widely believed to be better. See bigboywooly's sig for download.

twotone · 02-02-07, 02:51 PM

you cannot it reads 0 ammo where as it should read around AP 35 HE 106 and so on...

and yes itryed that ... Its really pissing me off.

where can i get GWX ? Subsim has som nice ones but not all of them have good instructions on where files go ...

ReallyDedPoet · 02-02-07, 03:04 PM

Fairly easy install. 6 files with an executable. See below.

Stock
1.4 Patch
GWX
Dec 23 Corrections

Your Done

RDP

ReallyDedPoet · 02-02-07, 03:06 PM

get if from BBW a few posts above.

twotone · 02-02-07, 03:12 PM

Cool but you didnt give me any links of where to get them at.........

would be alittle more help

also where and which version of the mod controler and commander do i need

also with links to where i cna get them .

I really do appriciate the help

I go tto the links in bootys sig but there are several files and i dont know which ones i need....

ReallyDedPoet · 02-02-07, 03:19 PM

Have a look at this link, should help you

http://www.subsim.com/radioroom/show...fficial+launch

RDP

twotone · 02-02-07, 03:30 PM

I got those files.... i downloaded from there 2 days ago there the ones giving me problems I however did not do the Dec patch
I have the file: GWX_-_Dec_23rd_Corrections.7z and the GWX.exe.7z but there is no exicuatable for these, what do i do with the patch file?

Also none of this explaines why I have no ammo in my deck gun .....

would any of these problems be because the game does not automatically delete the my doc's folder when you do an uninstall? I just found this folder in my doc's and it didnt get removed...

desperate cpt needs deck ammo....

and before this gets asked running a DELL XPS 400
Nvida 6800 graphic card
2 GIG RAM
and dual D processors

_Seth_ · 02-02-07, 03:30 PM

Hi twotone! Welcome to subsim, mate!!

bigboywooly · 02-02-07, 04:15 PM

Ok
The 7zip files need to be extracted
Get 7zip here - http://www.7-zip.org/

Place all the bin files and the exe in one folder and run the exe
The Dec 23rd patch needs to be unzipped to C:\Program Files\Ubisoft\SilentHunterIII\MODS - the MODS folder will be added during install

But lets sort the first problem
Hmmm no deck guns shells

Go to C:\Program Files\Ubisoft\SilentHunterIII\data\Cfg

Open Basic.cfg in notepad

Search for [AMMO_TYPE0];10.5cm SK C/32

It should say

[AMMO_TYPE0];10.5cm SK C/32
Idx=0
Year=1939
Month=1
AP=40
HE=60
SS=20

Just under that is the 88mm

Check those entries against yours

twotone · 02-02-07, 04:22 PM

right now ive only installed the basic game and the 1.4 patch so im guessing you want me to install teh GW mod and its patch and then check those file configs for the ammo?

bigboywooly · 02-02-07, 04:34 PM

Quote:

Originally Posted by twotone

right now ive only installed the basic game and the 1.4 patch so im guessing you want me to install teh GW mod and its patch and then check those file configs for the ammo?

What are you going to install ?
If you are going to install GWX then carry on and dont bother adding GW1.1

Before you add GWX dont forget to save the Umark.tga
Look in my first reply for the path
You can then add it to your GWX install

twotone · 02-02-07, 04:35 PM

rodger that.... am doing that now will be back after install hope your still here

GWX_-_Dec_23rd_Corrections.7z this is NOT a .zip fil its extention is .7z

computer doesnt knwo what it is...

bigboywooly · 02-02-07, 05:03 PM

Quote:

Originally Posted by twotone

rodger that.... am doing that now will be back after install hope your still here

GWX_-_Dec_23rd_Corrections.7z this is NOT a .zip fil its extention is .7z

computer doesnt knwo what it is...

Yep
Get the 7zip program here
http://www.7-zip.org/ - as I posted above
unzip\extract using that - into the MODS file

No doubt will still be around
Maybe a lickle drunk by then
:rotfl:

02-02-07, 02:41 PM	#1
twotone Swabbie Join Date: Feb 2007 Posts: 9 Downloads: 0 Uploads: 0	HELP Grey Wolf Mod 1.1 HELP!!! I went to here http://www.subsim.com/subsim_files/patches2005.html downloaded the Grey Wolves SuperMod v1.1 (5 files and an exe file) Numerous improvements and fixes. i then uninstalled my full game of SH III, and re-booted my system and re-installed SH III and the Patch to silent_hunter_3_dvd_1.4b_us i then installed the Grey Wolves SuperMod v1.1 and tryed to play. The game runs good but when i go into any mission no mater if its a Career or single mission i have 2 big problems. 1) NO Deck gun ammo - the Flak 88 and or the larger gun never have any ammo load out. The smaller AA guns do however have full ammo. 2) In un-moded ver. when you go to free camera mode and you hover out of the water above yoru sub and yoru sub is submerged, you could see an orange circle with a direction arrow pointing in the direction of your heading on on top of the water. but after you MOD it is gone. I really really reaally need this. file names on files: silent_hunter_3_dvd_1.4b_us (((Note i have done the un-install and reinstall 3 times same problems)))

02-02-07, 02:46 PM	#2
bigboywooly Rear Admiral Join Date: Apr 2006 Location: Swindon, England Posts: 10,151 Downloads: 35 Uploads: 0	Hi and welcome to Subsim The orange marker is in C:\Program Files\Ubisoft\SilentHunterIII\data\Misc and is called Umark You can copy it across from the stock version and add into the directory above How do you mean no deckgun ammo ? Did you click on a shell to load it ? __________________ My mediafire page http://www.mediafire.com/?11eoq19bq9r41

02-02-07, 02:49 PM	#3
Abd_von_Mumit The Old Man Join Date: Jan 2007 Location: Warszawa, Polska Posts: 1,453 Downloads: 46 Uploads: 4	I can't believe bigboywooly didn't mention that, but why don't try try rather Grey Wolves Expansion instead of 1.1 version? GWX is a newer version and is widely believed to be better. See bigboywooly's sig for download. __________________ Long, hard, wet and full of seamen. My precious. SH3+GWX+OLC — sunk x4, retired x2; SH5+TDW — still exploring My SH5 mods: EQuaTool - Elite Quality Map Tools, Patrol Routine Scripts, No Logo Intro Menu_Animation, Less Annoying Stopwatch Links: SH5 mods I use, FileFront, Manual plotting how-to

02-02-07, 02:51 PM	#4
twotone Swabbie Join Date: Feb 2007 Posts: 9 Downloads: 0 Uploads: 0	ammo .....loading you cannot it reads 0 ammo where as it should read around AP 35 HE 106 and so on... and yes itryed that ... Its really pissing me off. where can i get GWX ? Subsim has som nice ones but not all of them have good instructions on where files go ...

02-02-07, 03:04 PM	#5
ReallyDedPoet Canadian Wolf Join Date: Jul 2006 Location: Canada. The one and only, East Coast Posts: 10,886 Downloads: 946 Uploads: 5	Fairly easy install. 6 files with an executable. See below. Stock 1.4 Patch GWX Dec 23 Corrections Your Done RDP __________________ Back in the Day

02-02-07, 03:06 PM	#6
ReallyDedPoet Canadian Wolf Join Date: Jul 2006 Location: Canada. The one and only, East Coast Posts: 10,886 Downloads: 946 Uploads: 5	get if from BBW a few posts above. __________________ Back in the Day

02-02-07, 03:12 PM	#7
twotone Swabbie Join Date: Feb 2007 Posts: 9 Downloads: 0 Uploads: 0	links to files Cool but you didnt give me any links of where to get them at......... would be alittle more help also where and which version of the mod controler and commander do i need also with links to where i cna get them . I really do appriciate the help I go tto the links in bootys sig but there are several files and i dont know which ones i need....

02-02-07, 03:19 PM	#8
ReallyDedPoet Canadian Wolf Join Date: Jul 2006 Location: Canada. The one and only, East Coast Posts: 10,886 Downloads: 946 Uploads: 5	Have a look at this link, should help you http://www.subsim.com/radioroom/show...fficial+launch RDP __________________ Back in the Day

02-02-07, 03:30 PM	#9
twotone Swabbie Join Date: Feb 2007 Posts: 9 Downloads: 0 Uploads: 0	I got those files.... i downloaded from there 2 days ago there the ones giving me problems I however did not do the Dec patch I have the file: GWX_-_Dec_23rd_Corrections.7z and the GWX.exe.7z but there is no exicuatable for these, what do i do with the patch file? Also none of this explaines why I have no ammo in my deck gun ..... would any of these problems be because the game does not automatically delete the my doc's folder when you do an uninstall? I just found this folder in my doc's and it didnt get removed... desperate cpt needs deck ammo.... and before this gets asked running a DELL XPS 400 Nvida 6800 graphic card 2 GIG RAM and dual D processors Last edited by twotone; 02-02-07 at 04:02 PM.

02-02-07, 03:30 PM	#10
_Seth_ Ocean Warrior Join Date: Dec 2005 Location: In Tromsoe, @Tirpitz' final resting place.. Posts: 3,277 Downloads: 94 Uploads: 0	Hi twotone! Welcome to subsim, mate!! __________________

02-02-07, 04:15 PM	#11
bigboywooly Rear Admiral Join Date: Apr 2006 Location: Swindon, England Posts: 10,151 Downloads: 35 Uploads: 0	Ok The 7zip files need to be extracted Get 7zip here - http://www.7-zip.org/ Place all the bin files and the exe in one folder and run the exe The Dec 23rd patch needs to be unzipped to C:\Program Files\Ubisoft\SilentHunterIII\MODS - the MODS folder will be added during install But lets sort the first problem Hmmm no deck guns shells Go to C:\Program Files\Ubisoft\SilentHunterIII\data\Cfg Open Basic.cfg in notepad Search for [AMMO_TYPE0];10.5cm SK C/32 It should say [AMMO_TYPE0];10.5cm SK C/32 Idx=0 Year=1939 Month=1 AP=40 HE=60 SS=20 Just under that is the 88mm Check those entries against yours __________________ My mediafire page http://www.mediafire.com/?11eoq19bq9r41

02-02-07, 04:22 PM	#12
twotone Swabbie Join Date: Feb 2007 Posts: 9 Downloads: 0 Uploads: 0	right now ive only installed the basic game and the 1.4 patch so im guessing you want me to install teh GW mod and its patch and then check those file configs for the ammo?

02-02-07, 04:35 PM	#14
twotone Swabbie Join Date: Feb 2007 Posts: 9 Downloads: 0 Uploads: 0	rodger that.... am doing that now will be back after install hope your still here GWX_-_Dec_23rd_Corrections.7z this is NOT a .zip fil its extention is .7z computer doesnt knwo what it is... Last edited by twotone; 02-02-07 at 04:56 PM.