Help with Reinstall of SH3

wkb113 · 12-11-06, 08:18 PM

I have been running sh3 since it came out. I have been using the IUB mod.
I decided to uninstall sh3 and reinstall. I have uninstalled sh3 a few times already.
Now I cannot reinstall SH3. I have removed all entries to sh3, including the registry, the document and settings file. What is happening when I try to reinstall is the install wizard goes all the way to the end, then says Publishing Product Information, then the install wizard says the process was interrupted try to reinstall later. I am not running any antivirus program, I am not connected to the internet. I have not changed any hardware. I have tried copying the disk to desktop and try that no luck. Could someone please give me some advice. Need to be back at sea, I love SH3.

IBM Pentium 3 3gig 1 gig ram
Windows XP home
ATI 9800 Pro

JU_88 · 12-11-06, 08:45 PM

Not sure, if worse comes to worse - back up ypur files and reinstall windows xp.
Drastic yes - but its the only sure fire way I know off that will allow you to reinstall sh3 with out and hitches.

1mPHUNit0 · 12-11-06, 09:00 PM

No room on HD i think

wkb113 · 12-11-06, 09:29 PM

I have plenty of disk space left,and I dont have a the XP disk to reinstall XP.
I order my computer on line and It shipped with no disks.
Any ideas.......... I hope I dont have to buy another XP disk to reinstall my XP system.

fredbass · 12-11-06, 09:32 PM

I guess you probably have done this already, but you need to do a search on your entire computer for any SH3* files and delete any you find and try again.

Do you have a Repair/registry cleaning program you can run also? Also this little program is free to use, it's called "CCleaner". Defrag and then try again.

1mPHUNit0 · 12-11-06, 09:34 PM

From start Run type....eventvwr and investigate the error

wkb113 · 12-11-06, 11:06 PM

I have searched the computer for sh3 files,...BTW i have some backup files from SHcommander and some sh3 files from the sh3 root folder, but nothing i think would affect the re-install. I have run CCleaner, installed windows installer 3.1, seached my registry over and over., used the windows installer removal utility. The sh3 install does not give me an error code, just the installshield wizard pops up again and says process interupted try to reinstall the program later. ....also the install shows that it is copying the files to my HD but hangs at Publishing Product Infromation. I dont think I have anything running in the background.....wonder if I could try to install in safe mode maybe.

12-12-06, 02:22 AM

Take any files you want to save and place them in a new folder.
Delete the Ubisoft folder if it still exists.
Defrag your HD and then try to re-install.
Sometimes an installation hates a fragmented HD cause the FAT table may be
just a bit screwed to it's point of view.

Rolf Eschke · 12-12-06, 04:20 AM

Hi!
You must use this Tool

Windows Installer Clean Up

http://www.speedyshare.com/566998485.html

You can use it for all Windows Versions.
Greats Rolf

1mPHUNit0 · 12-12-06, 06:51 AM

It's not a microsoft problem...it's a ubisoft problem..i think.

Faamecanic · 12-12-06, 02:15 PM

Quote:

Originally Posted by wkb113

I have been running sh3 since it came out. I have been using the IUB mod.
I decided to uninstall sh3 and reinstall. I have uninstalled sh3 a few times already.
Now I cannot reinstall SH3. I have removed all entries to sh3, including the registry, the document and settings file. What is happening when I try to reinstall is the install wizard goes all the way to the end, then says Publishing Product Information, then the install wizard says the process was interrupted try to reinstall later. I am not running any antivirus program, I am not connected to the internet. I have not changed any hardware. I have tried copying the disk to desktop and try that no luck. Could someone please give me some advice. Need to be back at sea, I love SH3.

IBM Pentium 3 3gig 1 gig ram
Windows XP home
ATI 9800 Pro

I ran into the SAME problem awhile back. The only way I could get SH3 to reinstall is to NAME a folder SilentHunter3 (no spaces...just like I typed it) and have the installer install into that folder..... wierd!

wkb113 · 12-12-06, 04:50 PM

Well I am still trying to install SH3, Still stops when the InstallShield Wizard is publishing product information, and says setup was interrupted exit and try to install later. I did run the event viewer and it showed SH3 fialed , Source: Msilnstaller, Event ID 11708.....I tried searching for both these and couldnt find anything that helped.

If anyone knows what I could try next, I have tried defraging, searching all my computer and registry for anything relating to SH3 and removing from my computer . I run Ccleaner, Windows Installer Clean Up , Tyied to install to a different folder, Microsoft updates, I am using Ultimatedefrag V 1.32
Please HELP me....

...I am having withdrawals not having my SH3.

I would be greatful

AVGWarhawk · 12-12-06, 04:57 PM

Might sound strange but is the disk clean? No scratchs or smudges? The reason I ask is I had this issue with my kid and Zoo Tycoon installation. My kid had apparently danced on the disc or something. There was a tiny scratch and the installation would hang and be interrupted.

wkb113 · 12-12-06, 05:08 PM

Yes the Disk has a few scratches and smudges, I have installed worse looking disks. I thought about buying another SH3 and trying that . May take me a few days, during the meantime any suggesting on cleaning the disk. And thank you, to all who has helped me.

When I get another SH3, I will report back if it worked or not.

Lightning61 · 12-12-06, 08:13 PM

Turtle Wax!

12-11-06, 08:18 PM	#1
wkb113 Swabbie Join Date: Jun 2005 Posts: 5 Downloads: 380 Uploads: 0	Help with Reinstall of SH3 I have been running sh3 since it came out. I have been using the IUB mod. I decided to uninstall sh3 and reinstall. I have uninstalled sh3 a few times already. Now I cannot reinstall SH3. I have removed all entries to sh3, including the registry, the document and settings file. What is happening when I try to reinstall is the install wizard goes all the way to the end, then says Publishing Product Information, then the install wizard says the process was interrupted try to reinstall later. I am not running any antivirus program, I am not connected to the internet. I have not changed any hardware. I have tried copying the disk to desktop and try that no luck. Could someone please give me some advice. Need to be back at sea, I love SH3. IBM Pentium 3 3gig 1 gig ram Windows XP home ATI 9800 Pro

12-11-06, 09:32 PM	#5
fredbass Ace of the Deep Join Date: Feb 2006 Location: New Port Richey, Fl, USA Posts: 1,066 Downloads: 0 Uploads: 0	I guess you probably have done this already, but you need to do a search on your entire computer for any SH3* files and delete any you find and try again. Do you have a Repair/registry cleaning program you can run also? Also this little program is free to use, it's called "CCleaner". Defrag and then try again. __________________ Last edited by fredbass; 12-11-06 at 09:47 PM.

12-12-06, 04:57 PM	#13
AVGWarhawk Lucky Jack Join Date: Jun 2005 Location: In a 1954 Buick. Posts: 28,257 Downloads: 90 Uploads: 0	Might sound strange but is the disk clean? No scratchs or smudges? The reason I ask is I had this issue with my kid and Zoo Tycoon installation. My kid had apparently danced on the disc or something. There was a tiny scratch and the installation would hang and be interrupted. __________________ “You're painfully alive in a drugged and dying culture.” ― Richard Yates, Revolutionary Road

12-11-06, 08:45 PM	#2
JU_88 Silent Hunter Join Date: Jan 2006 Location: UK Posts: 3,803 Downloads: 11 Uploads: 0	Not sure, if worse comes to worse - back up ypur files and reinstall windows xp. Drastic yes - but its the only sure fire way I know off that will allow you to reinstall sh3 with out and hitches.

12-11-06, 09:00 PM	#3
1mPHUNit0 Chief Join Date: Jun 2005 Posts: 313 Downloads: 60 Uploads: 0	No room on HD i think

12-11-06, 09:29 PM	#4
wkb113 Swabbie Join Date: Jun 2005 Posts: 5 Downloads: 380 Uploads: 0	I have plenty of disk space left,and I dont have a the XP disk to reinstall XP. I order my computer on line and It shipped with no disks. Any ideas.......... I hope I dont have to buy another XP disk to reinstall my XP system.

12-11-06, 09:34 PM	#6
1mPHUNit0 Chief Join Date: Jun 2005 Posts: 313 Downloads: 60 Uploads: 0	From start Run type....eventvwr and investigate the error

12-11-06, 11:06 PM	#7
wkb113 Swabbie Join Date: Jun 2005 Posts: 5 Downloads: 380 Uploads: 0	I have searched the computer for sh3 files,...BTW i have some backup files from SHcommander and some sh3 files from the sh3 root folder, but nothing i think would affect the re-install. I have run CCleaner, installed windows installer 3.1, seached my registry over and over., used the windows installer removal utility. The sh3 install does not give me an error code, just the installshield wizard pops up again and says process interupted try to reinstall the program later. ....also the install shows that it is copying the files to my HD but hangs at Publishing Product Infromation. I dont think I have anything running in the background.....wonder if I could try to install in safe mode maybe.

12-12-06, 02:22 AM	#8
Madox58 Stowaway Posts: n/a Downloads: Uploads:	Take any files you want to save and place them in a new folder. Delete the Ubisoft folder if it still exists. Defrag your HD and then try to re-install. Sometimes an installation hates a fragmented HD cause the FAT table may be just a bit screwed to it's point of view.

12-12-06, 04:20 AM	#9
Rolf Eschke Lieutenant Join Date: Feb 2006 Location: Germany Posts: 265 Downloads: 60 Uploads: 0	Hi! You must use this Tool Windows Installer Clean Up http://www.speedyshare.com/566998485.html You can use it for all Windows Versions. Greats Rolf

12-12-06, 06:51 AM	#10
1mPHUNit0 Chief Join Date: Jun 2005 Posts: 313 Downloads: 60 Uploads: 0	It's not a microsoft problem...it's a ubisoft problem..i think.

12-12-06, 04:50 PM	#12
wkb113 Swabbie Join Date: Jun 2005 Posts: 5 Downloads: 380 Uploads: 0	Well I am still trying to install SH3, Still stops when the InstallShield Wizard is publishing product information, and says setup was interrupted exit and try to install later. I did run the event viewer and it showed SH3 fialed , Source: Msilnstaller, Event ID 11708.....I tried searching for both these and couldnt find anything that helped. If anyone knows what I could try next, I have tried defraging, searching all my computer and registry for anything relating to SH3 and removing from my computer . I run Ccleaner, Windows Installer Clean Up , Tyied to install to a different folder, Microsoft updates, I am using Ultimatedefrag V 1.32 Please HELP me.... ...I am having withdrawals not having my SH3. I would be greatful

12-12-06, 05:08 PM	#14
wkb113 Swabbie Join Date: Jun 2005 Posts: 5 Downloads: 380 Uploads: 0	Yes the Disk has a few scratches and smudges, I have installed worse looking disks. I thought about buying another SH3 and trying that . May take me a few days, during the meantime any suggesting on cleaning the disk. And thank you, to all who has helped me. When I get another SH3, I will report back if it worked or not.

12-12-06, 08:13 PM	#15
Lightning61 Loader Join Date: Nov 2006 Posts: 82 Downloads: 19 Uploads: 0	Turtle Wax!