ARB WideGui 1920x1080 - Page 37

Aktungbby · 03-22-23, 11:34 AM

MILLANDSON!

after a 6 year 'silent run'!

subwayboy · 04-23-23, 12:18 PM

I'm trying to install ARB widegui mod, I've gone through the steps of patching the game with h.sie patch, then it tells me to do the tycho patch but when I try to use tychosh3patch.bat, it comes up with "The code execution cannot proceed because MSVCR100.dll was no found. Reinstalling the program may fix this problem".

Someone suggested to install all the c++ redistributables which I've done, yet I still have this issue. I can't seem to seem to skip this step, when I install ARB gui and try to start sh3, i get "Can not intialize 3D engine" so it seem I cannot skip the tycho patch.

Anyone else have this issue or know a fix? Thanks

Edit: Fixed by installing all C++ redistributables both x86 and x64

Theodulus · 06-23-23, 10:46 PM

Heya! This UI is incredible. I'm just getting back into the game after a very long break. I'm also having the square binoculars bug. I'm using the Steam version with GWX 3.0 installed. It's installed outside of Program Files.

Aktungbby · 06-24-23, 03:59 PM

Theodulus!

...0n the surface after a 9 year 'silent run'!

HawkCZ · 07-10-23, 01:07 PM

Here's a fix for anyone who is having the binoculars issue with the latest version:

https://drive.google.com/file/d/1YOL...ew?usp=sharing

There are two versions, one is just a fix with a single lower zoom level, the other is the same as Ahnenerbe GUI with 3 zoom levels with higher max zoom. I also made some more minor changes like adding the water effect for free camera, since it is present in Ahnenerbe GUI which I was using before this.

To use the fix either overwrite the file in data\Library or overwrite the file in the mod's JSGME folder if you're using JSGME and then load the mod again.

I hope it works for you, happy hunting!

JohnCarterOfMars · 07-15-23, 03:46 PM

Hello, everybody.

I'm new to this game (I grew up playing Gato and Silent Service on an Apple //e, and 688 Attack Sub on a Sega Genesis).

I'm wrapping my head around the mods and trying to figure out what goes where.

That said...

Without intending to offend any authors, what would be involved in trying to move the full-screen navigation map from this mod to replace the smaller navigation map in the Ahnenerbe WideGui 1920 x 1080 Final mod? I really like both mods (I know they are derivatives of the same work), but I am frustrated by the bouncing UZO and binoculars from this mod. I like the stability of the UZO and binoculars in the Ahnenerbe WideGui mod, but I don't like the smaller maps.

I'm not asking anyone to make a mod for me, but can someone point me in the right direction to try to figure out how to cobble together the pieces that I need?

Thanks in advance for any help.

-JCoM

Aktungbby · 07-15-23, 03:53 PM

JohnCarterOfMars!

JohnCarterOfMars · 07-16-23, 04:09 AM

Has anybody reported that the Kiel Canal Out and In pre-plotted courses don't work in either of the WideGui 1920 x 1080 mods?

-JCoM

PianoMonkey · 11-22-23, 08:04 PM

Without the targeting notepad in either periscope, which seems to have been completely removed as of v.4 of this mod, where does one look to find the name/class of highlighted ships on lower realism settings? I'm no good at identifying ships using the silhouettes book, so I've always relied on low realism and the targeting notepad to help me.

Aktungbby · 11-22-23, 11:44 PM

PianoMonkey!

...after an 18-year 'silent run'!!

fitzcarraldo · 11-26-23, 08:59 AM

Quote:

Originally Posted by PianoMonkey

Without the targeting notepad in either periscope, which seems to have been completely removed as of v.4 of this mod, where does one look to find the name/class of highlighted ships on lower realism settings? I'm no good at identifying ships using the silhouettes book, so I've always relied on low realism and the targeting notepad to help me.

Hi Piano Monkey: You can use GWX OneAlex, it has the ARB with notepad, and a lot of improvements.

Best regards.

Fitzcarraldo

gmetzo · 12-20-23, 02:29 PM

Hi , could someone tell me why I have a duplicated attack periscope? No other problems with ARB whatsoever. Everything works fine.

arb periscope problem.jpg

gmetzo · 12-20-23, 02:30 PM

Sorry I didn't realise the above attachment was too small to see. Here is a better picture on imageBB as you can see the left hand scale is duplicated and out of synch.

https://ibb.co/3CWpqQf

FUBAR295 · 12-20-23, 05:13 PM

gmetzo,

What you see is a overlay between what is in the hard code reticle verses what ARB has in TGA files.

You can use Tycho's patch to remove the hard code reticles.

Good hunting,
FUBAR295

gmetzo · 12-21-23, 02:55 PM

Quote:

Originally Posted by FUBAR295

gmetzo,

What you see is a overlay between what is in the hard code reticle verses what ARB has in TGA files.

You can use Tycho's patch to remove the hard code reticles.

Good hunting,
FUBAR295

Thanks for the reply. Tycho patcher did in fact fix this!

03-22-23, 11:34 AM	#541
Aktungbby Gefallen Engel U-666 Join Date: Jul 2013 Location: On a tilted, overheated, overpopulated spinning mudball on Collision course with Andromeda Galaxy Posts: 30,132 Downloads: 24 Uploads: 0	welcome back! MILLANDSON! after a 6 year 'silent run'! __________________ "Only two things are infinite; The Universe and human squirrelyness?!!

04-23-23, 12:18 PM	#542
subwayboy Swabbie Join Date: Apr 2023 Posts: 5 Downloads: 71 Uploads: 0	I'm trying to install ARB widegui mod, I've gone through the steps of patching the game with h.sie patch, then it tells me to do the tycho patch but when I try to use tychosh3patch.bat, it comes up with "The code execution cannot proceed because MSVCR100.dll was no found. Reinstalling the program may fix this problem". Someone suggested to install all the c++ redistributables which I've done, yet I still have this issue. I can't seem to seem to skip this step, when I install ARB gui and try to start sh3, i get "Can not intialize 3D engine" so it seem I cannot skip the tycho patch. Anyone else have this issue or know a fix? Thanks Edit: Fixed by installing all C++ redistributables both x86 and x64 Last edited by subwayboy; 04-25-23 at 03:26 AM.

06-24-23, 03:59 PM	#544
Aktungbby Gefallen Engel U-666 Join Date: Jul 2013 Location: On a tilted, overheated, overpopulated spinning mudball on Collision course with Andromeda Galaxy Posts: 30,132 Downloads: 24 Uploads: 0	Welcome back! Theodulus!...0n the surface after a 9 year 'silent run'! __________________ "Only two things are infinite; The Universe and human squirrelyness?!!

07-15-23, 03:53 PM	#547
Aktungbby Gefallen Engel U-666 Join Date: Jul 2013 Location: On a tilted, overheated, overpopulated spinning mudball on Collision course with Andromeda Galaxy Posts: 30,132 Downloads: 24 Uploads: 0	Welcome aboard! JohnCarterOfMars! __________________ "Only two things are infinite; The Universe and human squirrelyness?!!

07-16-23, 04:09 AM	#548
JohnCarterOfMars Loader Join Date: Jul 2023 Posts: 88 Downloads: 25 Uploads: 0	Kiel Canal Pre-Plotted Courses Not Working? Has anybody reported that the Kiel Canal Out and In pre-plotted courses don't work in either of the WideGui 1920 x 1080 mods? -JCoM

06-23-23, 10:46 PM	#543
Theodulus Watch Join Date: Jun 2014 Posts: 23 Downloads: 56 Uploads: 0	Heya! This UI is incredible. I'm just getting back into the game after a very long break. I'm also having the square binoculars bug. I'm using the Steam version with GWX 3.0 installed. It's installed outside of Program Files.

07-10-23, 01:07 PM	#545
HawkCZ Swabbie Join Date: Jun 2016 Posts: 6 Downloads: 25 Uploads: 0	Here's a fix for anyone who is having the binoculars issue with the latest version: https://drive.google.com/file/d/1YOL...ew?usp=sharing There are two versions, one is just a fix with a single lower zoom level, the other is the same as Ahnenerbe GUI with 3 zoom levels with higher max zoom. I also made some more minor changes like adding the water effect for free camera, since it is present in Ahnenerbe GUI which I was using before this. To use the fix either overwrite the file in data\Library or overwrite the file in the mod's JSGME folder if you're using JSGME and then load the mod again. I hope it works for you, happy hunting!

07-15-23, 03:46 PM	#546
JohnCarterOfMars Loader Join Date: Jul 2023 Posts: 88 Downloads: 25 Uploads: 0	Hello, everybody. I'm new to this game (I grew up playing Gato and Silent Service on an Apple //e, and 688 Attack Sub on a Sega Genesis). I'm wrapping my head around the mods and trying to figure out what goes where. That said... Without intending to offend any authors, what would be involved in trying to move the full-screen navigation map from this mod to replace the smaller navigation map in the Ahnenerbe WideGui 1920 x 1080 Final mod? I really like both mods (I know they are derivatives of the same work), but I am frustrated by the bouncing UZO and binoculars from this mod. I like the stability of the UZO and binoculars in the Ahnenerbe WideGui mod, but I don't like the smaller maps. I'm not asking anyone to make a mod for me, but can someone point me in the right direction to try to figure out how to cobble together the pieces that I need? Thanks in advance for any help. -JCoM

11-22-23, 08:04 PM	#549
PianoMonkey Nub Join Date: Dec 2005 Posts: 2 Downloads: 7 Uploads: 0	Without the targeting notepad in either periscope, which seems to have been completely removed as of v.4 of this mod, where does one look to find the name/class of highlighted ships on lower realism settings? I'm no good at identifying ships using the silhouettes book, so I've always relied on low realism and the targeting notepad to help me.

11-22-23, 11:44 PM	#550
Aktungbby Gefallen Engel U-666 Join Date: Jul 2013 Location: On a tilted, overheated, overpopulated spinning mudball on Collision course with Andromeda Galaxy Posts: 30,132 Downloads: 24 Uploads: 0	Welcome back! PianoMonkey!...after an 18-year 'silent run'!! __________________ "Only two things are infinite; The Universe and human squirrelyness?!!

12-20-23, 02:29 PM	#552
gmetzo Seaman Join Date: Jul 2020 Location: Greece Posts: 39 Downloads: 140 Uploads: 0	Hi , could someone tell me why I have a duplicated attack periscope? No other problems with ARB whatsoever. Everything works fine. arb periscope problem.jpg __________________ El Psy Kongroo

12-20-23, 02:30 PM	#553
gmetzo Seaman Join Date: Jul 2020 Location: Greece Posts: 39 Downloads: 140 Uploads: 0	Sorry I didn't realise the above attachment was too small to see. Here is a better picture on imageBB as you can see the left hand scale is duplicated and out of synch. https://ibb.co/3CWpqQf __________________ El Psy Kongroo

12-20-23, 05:13 PM	#554
FUBAR295 Krusty Krab Join Date: Mar 2002 Location: Decks awash in the North Atlantic Posts: 1,456 Downloads: 494 Uploads: 0	gmetzo, What you see is a overlay between what is in the hard code reticle verses what ARB has in TGA files. You can use Tycho's patch to remove the hard code reticles. Good hunting, FUBAR295 __________________ Good judgment comes from experience. Unfortunately, the experience usually comes from bad judgment.